The disposal price has been reduced! (Member discounts are not applicable) 2023/12/15 sales price 118,000 yen Maintained! The thin preamp from the musical Fidelity has an English style taste where you can feel the elegance, and the perfect balance of high frequencies that don't insist too much on the thick, thick mid-low range unique to this era feels good. The tape/monitor switch has been repaired and replaced and is a non-genuine product. The exterior is dull overall, with small scratches and a lot of feeling of use (Asaine Tomoho)
Maintenance information: 2023.10.26 maintained (TAPE1 monitor switch defective → non-genuine silver knob replacement. Rear terminal screw idle rotation all replacement, operation check) 2023.10.12 maintained (main VOL noise → replacement. Treble distortion noise VOL replacement (original not available, replacement with replacement, no click on the midpoint position) IC, DC leak defect replacement, capacitor deterioration replacement, operation check.
(We will not be able to respond if the dedicated parts are defective in the future)
Accessories: none
Main specifications: external power supply system with PHNON (MM MC) CR type RIAA equalizer output 2 systems W482 x H57 x D166 cm 3.0 kg
with Ortofon OM-10! Specially designed for the Pro-ject belt drive player ESSENTIAL 3 A model commemorating the 50th anniversary of the release of The Beatles' masterpiece concept album “Sgt. Pepper's Lonely Hearts Club Band.” The same design as the bass drum on the album jacket can be seen through the acrylic platter. There are many abrasions on the dust cover. Serial 17S059046 (Murakoshi Yoichi)
Maintenance information: 2024.4.29 sound output confirmed
Accessories: power cord, EP adapter
Main Specifications: RPM 33/45 r.p.m. RPM RPM deviation 33 ± 0.70% 45 ± 0.60% WOW Flutter 33 ± 0.21% 45: ± 0.19% S/N Ratio − 66dB Tone Arm Dimensions 8.6 inch (218.5 mm) Overhang 22.0mm Power Consumption 4.5 W Power Adapter 15V/500mA DC Size W (width) 420 mm x H (height) 112 mm x D (depth) ) 330mm weight 5kg
Genuine headshell included with Technics SL-1200mk7 etc. There is a slight chip in the screw hole (Mizushima Itsuro)
Maintenance information: 2024.4.27 continuity confirmed
Accessories: none
Main specifications: dead weight 8.7g
We generously use 3 types of luxurious high-purity materials, starting with the 1.2 m pair of RCA cables, pure silver coated OFC. Designed to go all the way to the tip of the terminal. This is a cable with a high degree of perfection that cannot be enjoyed in this class. There is an appearance, dullness, and a feeling of use (Tomoho Asaine)
Maintenance information: 2024.4.28 continuity confirmed
Accessories: none
A ceiling hanging bracket that can be used with BOSE's 100 series, etc. Comes with a safety wire to prevent falling. The installation surface can be rotated 360°, and it has one joint. There is a slight feeling of use such as dullness (Mizushima Itsuro)
Accessories: none
Main specifications: W100 x H170 (straight out) x D100 mm Speaker mounting part W85 x D40 mm (main body mounting screw pitch 60 mm)
Set of 4 Caldas jumper plates It is machined copper. There is an abrasion on the lug part (Murakoshi Yoichi)
Accessories: none
Main specifications: length from lug center to lug center: 37mm; lug inner diameter: 6mm
Comes with original box! Sumiko's Pearl lets you enjoy high-quality analog sound. Compared to Black Pearl, the bass is tighter, the treble range is wider, and you can feel an improved sense of transparency. The exterior is generally good with no bends (Yonejima Satoshi)
Maintenance information: 2024.4.29 Operation confirmed
Accessories: needle cover, original box
Main specifications: mm type output 3.5 mV frequency characteristics 12 to 30,000 Hz suitable needle pressure 1.5 to 2.0 g dead weight 6.0 g
The price has been reduced! 2024/4/28 sales price 30,000 yen GE Varillera mono cartridge for SP. I made a sound at the storefront, but the sound is so clear and powerful that I couldn't even think of it from my age. There is dullness over time and a feeling of use (Yamato Yuki)
Maintenance information: 2024.4.28 Operation confirmed
Accessories: none
High output MC cartridge attached to the company's DP-47F. Can be used without a head amplifier. Compared to the DL-103, the sound is detailed, delicate, and clear. There is dullness (Kanai Hidetsugu)
Maintenance information: 2024.5.4 sound output confirmed
Accessories: none
Main specifications: MC type output 1.6 mV frequency band 20 Hz to 45,000 Hz needle pressure 1.8 g dead weight 5 g
Phono cable is an audio cable that uses a double 2-core shield to achieve the same potential on the left and right sides of the 1.0m RCA terminals. This cable has straightforward sound quality and is easy to use. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.3 continuity confirmed
Accessories: none
*Inexpensive because the pitch control lever is missing. DENON DJ specification record player. 78 rotations can be played. High-accuracy rotation control enables instantaneous start-up and braking. In order to enhance operability in the dark, the operation part is designed to light up. Cracks and small scratches can be seen on the exterior and the dust cover edge (Murakoshi Yoichi)
Maintenance information: 2024.5.4 sound output confirmed
Accessories: connecting cable, ground wire, EP adapter
Key Specifications: Direct Drive Quartz Lock W453 x H62 x D360 mm 11.8 kg
Maintained! A network with a crossover frequency of 7 kHz. It is ideal for MID/HIGH for 3-way systems using 2440. There is a small wound (Oikawa Tetsuji)
Maintenance information: 2024.4.17 Maintained (2 VR attenuators, 12 screws, 24 insulating washers replaced)
Accessories: none
Main specifications: crossover frequency 7 kHz, allowable input (continuous program), 50 W impedance, bass range: 12 to 16 ohms, treble range: 12 to 16 ohms, treble attenuation/variable volume, mounting hole W140 x 108 mm 0.7 kg
Maintained! It is a D/A converter that was sold in the early 1990s and can play music that is faithful to the original sound due to 32 times oversampling. You can enjoy thick, instantaneous sound. In particular, the elastic expression in the mid to low range stands out in the JAZZ/ROCK series. The exterior is dull. Serial 100925-90 (Fujisawa Yukishi)
Maintenance information: 2024.5.3 maintained (coaxial input inverter IC replacement, solder correction, connector cleaning, operation check with each Fs)
Accessories: power cord
Main specifications: input BNC coaxial x 2, TOS x 1 DSP Digimaster software 32 times oversampling input 32 kHz, 44.1 kHz, 48 kHz automatic switching W445 x H68 x D360 mm 6.5 kg
The HDMI cable is compatible with 2.0m Ethernet and is ideal for Ultra HD Blu-ray transmission. High-speed transmission and transmission of ultra-high image quality images with a high color gamut are possible, and the appearance, dullness, and feeling of use can be seen (Kobayashi Hitoshi)
Maintenance Information: 2024.3.9 Video Sound Confirmed
Accessories: none
Main specifications: transmission speed 18 Gbps, resolution 4K x 2K (60p) compatible, triple shielded, gold-plated plug specification, cable length 2.0 m, cable thickness 6.5 mm
2M series RED. The good sound and fluttering energy typical of an orthophone are attractive. The degree is generally good (Kanai Hidetsugu)
Maintenance information: 2024.4.25 sound output confirmed
Accessories: needle cover
Main specifications: MM type 5.5 mV 20 to 22,000 Hz 47 ohms suitable needle pressure 1.8 g dead weight 7.2 g
*Currently sold. It's an inexpensive yet powerful amplifier. The model, which combines stable operation with abundant power, has a good sense of dynamism, and it feels like it comes to the fore. The input is equipped with an unbalanced RCA pin and a balanced TRS phone. You can see a feeling of use on the exterior, marks, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.4.26 Operation confirmed
Accessories: power cable
Main specifications: 45W+45W (8Ω) bridge output 150W (8Ω) W480 × H99 × D260 mm 6.8 kg
The price has been drastically reduced. 2024/3/20 sales price 10,000 yen*Since there are many scratches such as scratches on the top plate and sides, and dents on the corners, it is inexpensive and is currently sold. Technics 3-way bookshelf speaker A honeycomb flat unit is used to reproduce a unique sound field. In addition to the appearance described above, dullness and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.3.19 Operation confirmed
Accessories: saran net
Main specifications: 3-way 3-speaker bass reflex 6Ω 89dB crossover frequency 2kHz, 4.5kHz W223 x H378 x D207 mm 5.3 kg
※Because it smells like tobacco, it's cheap. 1 bottle only. Balance cable, 5.0 m, Neutrik branded cable, 3 core specification, 8412. The sound is thick and solid throughout the entire range. The exterior smells like tobacco (Tamura Eiji)
Maintenance information: 2024.4.30 continuity confirmed
Accessories: No accessories
The disposal price has been reduced! Member prices are not applicable. 2024/4/26 sales price 148,000 yen Maintained! Although it is a line-only preamp, it also has a total of 8 input systems, so it is convenient for using multiple devices such as CD players. Also, the CD input has a dedicated buffer amplifier and volume, so you can feel the attention to detail in this model. The exterior has bumps, scratches, etc. Serial J7Y818 (Fujisawa Yukishi)
Maintenance information: 2024.4.26 Maintained (replaced due to offset volume disconnection and poor contact. Due to poor contact with the push switch inside the sealing door, polishing grease was applied to the disassembly contact. The main volume and CD volume contacts have been cleaned. The power circuit capacitor has been replaced. Each input/output operation was checked.)
Accessories: No accessories
Main specifications: line preamplifier, CD dedicated buffer amplifier, CD dedicated input balanced/unbalanced 1 system each, line input 5 systems, 1 output balance system, 2 unbalanced systems, W475 x H135 x D373 mm, 11 kg
Choke transformer hammer tone color 15H/150mA DC resistance 155 Ω (measured 154.6 Ω) W84 x H105 x D75 mm 2.3 kg There are fine bumps and line scratches (Kojima Yosuke)
Accessories: none
Power transformer primary: 100V/1.5A secondary: 320-280-0-70-270-320V/
AC0.16A 5V/3A 2.5V/3A ×2 6.3V/3A W109 × H110 × D95 mm 3.7 kg There is dullness and line damage in places (Kojima Yosuke)
Accessories: none
The disposal price has been reduced! (Member prices are not applicable) 2024/4/25 sales price 498,000 yen KLIMAX DSM/1 is a model created through the DSM/2 upgrade service. It is a car where you can fully enjoy the “KLIMAX” quality while keeping the simple structure typical of LINN. There are no noticeable scratches on the exterior. Serial 1427895 (Tamura Eiji)
Maintenance information: 2024.4.25 Maintained (both RCA jack L/R replaced (made by WBT). Ver (4.104.518))
Accessories: power cable
Main Specifications: Support Files: FLAC, WAV, ALAC, AIFF, AAC, MP3, WMA Compatible Sampling Frequency: 44.1 to 192 kHz Compatible Bits: 16-24 Bits W381 x H80 x D280 mm Weight 2.7 kg
The price has been drastically reduced. 2024/4/10 sales price 10,000 yen. Coaxial cable 0.9 m 75 ohm collet chuck plug From the shield notation, it seems that the cable is also made by ZAOLLA. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.8 continuity confirmed
Accessories: none
The disposal price has been reduced! (Member discounts are not applicable) 2024/4/25 sales price 198,000 yen manufacturer maintenance completed! Tubular premain amplifier equipped with 300B. In addition to combining a vacuum tube with a modern design, it is easy to use with easy bias adjustment. Since it can also be used as a power amplifier using the PRE-IN terminal, it is also recommended for those considering separating them in the future. Serial 05050050 (Hiroki Aso)
Maintenance information: 2024.4.25 Maintained (maintenance including restoration of the contact point of the selector polishing volume ※ vacuum tubes can still be used, but they have deteriorated appropriately over time, so please understand that this is a current product)
Accessories: instruction manual copy power cable
Main specifications: maximum output 18W+18W (8Ω) vacuum tube 300B/A grade push-pull input terminal input RCA4 system
(4 rear systems, 1 tape out system) output terminals 6/8/16 ohm, 1 system each, TRIODE original 300B power consumption 220W size 440 x depth 320 x height 200 mm weight 20 kg
The disposal price has been reduced! (Member discounts are not applicable) 2023/12/29 sales price 99,800 yen Maintenance completed! The design full of oldies is attractive, and Newcam's mono mixer premain for PA. 6L6 is used as the output tube. Channel 1 is compatible with LINE, PHONO, and MIC, and channels 2 to 4 are compatible with microphones. The volume for each channel is around 12 o'clock, and MASTER is used for volume adjustment. There is a feeling of use such as small scratches and paint deterioration appropriate to the exterior model year (Kobayashi Hitoshi)
Maintenance information: 2023.12.12 maintenance (master volume disassembly, cleaning repair, MIC input transformer, etc. contact repair, left side front lamp off, 12AX7, 150 μF electrolytic capacitor replacement. Vacuum tube socket and RCA jack caulk repair. Operation checked (measured at 41 to 61 W SP: 8 Ω with rated output AC 100 to 117 V).
Accessories: none
Main specifications: 6L6 push-pull 60W mono LINE, 1 PHONO system each, MIC4 system W440 x H190 x D350 mm 16.5 kg
Orthophone mono cartridges. It's a cartridge that allows you to fully enjoy the heavy sound of a mono disc. Serial 018020 (Tamura Eiji)
Maintenance information: 2024.5.1 operation confirmed
Accessories: needle cover
Main specifications: output voltage 3 mV frequency characteristics 20 to 20,000 Hz 47 kΩ internal resistance 100 Ω diamond needle suitable needle pressure 3.5 g dead weight 30.5 g
This is an ADK LD/LP rack. It is well-made and can hold over 140 sheets of LP and LD software. There are scuffs and bumps on the exterior. (FUJISAWA KOSHI)
Accessories: No accessories
Main specifications: W800 x H360 x D345 mm weight 14 kg
* Since it has been replaced with an external plug, it is inexpensive. RCA cable, 0.7 m pair, LC-OFC class 1 conductor, has been produced for over 10 years, and is a long-selling product balance capable of pure signal transmission. It is a cable with flat, tight bass and a smooth high-frequency luster. It rubs against the sheath and is dirty (Kojima Yosuke)
Accessories: none
* Since it has been replaced with an external plug, it is inexpensive. RCA cable, 1.0 m pair, LC-OFC class 1 conductor, has been produced for over 10 years, and is a long-selling product balance capable of pure signal transmission. It is a cable with flat, tight bass and a smooth high-frequency luster. It rubs against the sheath and is dirty (Kojima Yosuke)
Accessories: none
* Since it has been replaced with an external plug, it is inexpensive. RCA cable, 1.0 m pair, LC-OFC class 1 conductor, has been produced for over 10 years, and is a long-selling product balance capable of pure signal transmission. It is a cable with flat, tight bass and a smooth high-frequency luster. It rubs against the sheath and is dirty (Kojima Yosuke)
Accessories: none
Stereo mini-XLR male cable 0.7 m conversion cable for line connection from portable players, etc. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Maintenance information: 2024.5.3 continuity confirmed
Accessories: none
Balanced stereo mini (4.4 mm, 5 pole male) - XLR male cable, 1.0 m pair, reliable and proven Negrex commercial cable. The sound quality is clear and straightforward. The exterior is dull (Tomonori Asaine)
Maintenance information: 2024.5.3 continuity confirmed
Accessories: No accessories
Maintained. A diatone preamp with a thick mid-range sound. The sense of extrusion in the low frequencies is also good, and the overall sound is energetic. Also, it is a unit with a full range of functions as a preamplifier, such as input gain adjustment and left and right independent tone control. The exterior has many scratches and dullness overall (Oikawa Tetsuji)
Maintenance information: 2024.5.3 maintained (panel lever switch and other switch disassembly contacts are polished and contact cleaner applied. Volume contact correction. Power cord replacement)
Accessories: none
Main specifications: 2 mono construction system, special attenuator volume adopted, equipped with 2 PHONO inputs, 2 line inputs, W425 x H169 x D204 mm, 5.8 kg
Very good product with lots of accessories! Current network receiver amplifier compatible with high-resolution sound sources such as network DSD playback. It is compatible with streaming services using HEOS technology recommended by D&M, voice control with Amazon Alexa, etc., and is perfect for ease of use. It is also equipped with a CD player, and a wide FM/AM tuner can also be received. Serial BGX27230273546 (Murakoshi Yoichi)
Maintenance information: 2024.5.3 sound output confirmed
Accessories: remote control, instruction manual, power cord, antenna, original box
Main specifications: rated output 50W+50W (6Ω) DSD (2.8/5.6MHz) FLAC/WAV/Apple Lossless (192kHz/24bit) 2.4/5GHz dual-band Wi-Fi equipped voice input terminal analog x 1, optical digital x 2 USB-A x 1 W280 x H111 x D303 mm 3.4 kg
A type with a built-in transformer for the original SPU MC cartridge that was reprinted in a limited edition of 1000 pieces. The thick, rich texture and sharp high frequency set it apart from other cartridges. The original box is from the old GTE and has deteriorated drastically. The main body is generally good (Murakoshi Yoichi)
Maintenance information: 2024.5.2 sound output confirmed
Accessories: needle cover, original box (for old GTE, has deteriorated)
Main specifications: MC type transformer built-in elliptical needle output 7 mV playback frequency band 20 to 20,000 Hz needle pressure 3 to 4.5 g dead weight 33.2 g (actual measurement)
Fidelity-Research 5-head shell keeper You can store it while the cartridge is attached to the shell. It's dull (Oikawa Tetsuji)
Accessories: none
Main specifications: W300 x H45 x D125 mm approx. 540 g
A set of 4 small mini pottery blocks made by Noritake, famous for its high-grade tableware. Compared to TAOC, etc., the impression is that the sound is gentle. The exterior has stains like tape marks on one side, dullness, and a feeling of use (Murakoshi Yoichi)
Accessories: original box
Main specifications: 80 x 100 x 200 mm
This is an ADK LD/LP rack. It is well-made and can hold over 140 sheets of LP and LD software. There are scuffs and bumps on the exterior. (FUJISAWA KOSHI)
Accessories: No accessories
Main specifications: W800 x H360 x D345 mm weight 14 kg
This is an ADK LD/LP rack. It is well-made and can hold over 140 sheets of LP and LD software. There are scuffs and bumps on the exterior. (FUJISAWA KOSHI)
Accessories: No accessories
Main specifications: W800 x H360 x D345 mm weight 14 kg
This is an ADK LD/LP rack. It is well-made and can hold over 140 sheets of LP and LD software. There are scuffs and bumps on the exterior. (FUJISAWA KOSHI)
Accessories: No accessories
Main specifications: W800 x H360 x D345 mm weight 14 kg
This is an ADK LD/LP rack. It is well-made and can hold over 140 sheets of LP and LD software. There are scuffs, bumps, and dirt marks on the exterior. (FUJISAWA KOSHI)
Accessories: No accessories
Main specifications: W800 x H360 x D345 mm weight 14 kg
This is an ADK LD/LP rack. It is well-made and can hold over 140 sheets of LP and LD software. There are scuffs and bumps on the exterior. (FUJISAWA KOSHI)
Accessories: No accessories
Main specifications: W800 x H360 x D345 mm weight 14 kg
※Dividers and dowels are missing, so it's cheap. This is an ADK LD/LP rack. It is well-made and can hold over 140 sheets of LP and LD software. There are scuffs and stains on the exterior. (FUJISAWA KOSHI)
Accessories: No accessories
Main specifications: W800 x H360 x D345 mm weight 14 kg
※Dividers and dowels are missing, so it's cheap. This is an ADK LD/LP rack. It is well-made and can hold over 140 sheets of LP and LD software. There are scuffs and stains on the exterior. (FUJISAWA KOSHI)
Accessories: No accessories
Main specifications: W800 x H360 x D345 mm weight 14 kg
This is an ADK LD/LP rack. It is well-made and can hold over 140 sheets of LP and LD software. There are scuffs and bumps on the exterior. (FUJISAWA KOSHI)
Accessories: No accessories
Main specifications: W800 x H360 x D345 mm weight 14 kg
This is an ADK LD/LP rack. It is well-made and can hold over 140 sheets of LP and LD software. There are scuffs and bumps on the exterior. (FUJISAWA KOSHI)
Accessories: No accessories
Main specifications: W800 x H360 x D345 mm weight 14 kg
The price has been reduced. 2024/4/29 sales price 45,000 yen Luxman high quality speaker selector. It's a long-running model. The discrete design where each ground circuit is switched, and 6N wires are used for internal wiring, etc., and the special configuration typical of the company shines. Speaker terminals are also compatible with banana and Y lug terminals (Oikawa Tetsuji)
Maintenance information: 2024.4.29 continuity confirmed
Accessories: none
Main specifications: 1 input system, 3 SP output systems, W370 x H71 x D164 mm, 3 kg
Balance cable is a standard 1.5m pair Accuphase balance cable. It is a natural sound that removes disguise to enhance the characteristics of amplifiers and players. As for the exterior, there is room odor on the sheath (Tamura Eiji)
Maintenance information: 2024.3.14 continuity confirmed
Accessories: No accessories