※Since the Y lug is cut on one side, it is inexpensive. This line improved the design of the ReSona, which is a 2.5 m pair front speaker cable line. You can enjoy pure sound with a sense of dynamism, just like a PAD. The exterior is dull and has a feeling of use (Tomoho Asaine)
Maintenance information: 2024.5.9 continuity confirmed
Accessories: none
Set of 4 This stand is made of high-carbon cast iron with excellent vibration handling capabilities. It can be used for a wide range of speakers from large to medium. The sound image is accurately and tightly reproduced. The exterior is dull and has small scratches (Murakoshi Yoichi)
Accessories: none
Main specifications: W100×H140×D300mm high carbon cast iron Weight 8kg/book
Set of 4 A TAOC speaker stand with a high vibration damping effect. Made from high-carbon cast iron, the speaker system improves pitch, depth, and transparency. Recommended for middle class speakers. There is no felt. The exterior is dull, and there is a feeling of use over time, such as small scratches and rust stains on the bottom (Asae Tomoho)
Accessories: none
Main specifications: W100×H140×D170mm, made of high-carbon cast iron, weight 5.0 kg/1 bottle
Wooden 5-tier rack with casters from unknown manufacturer. The weight is light, and the shelves inside can also be adjusted with dowels, so it seems easy to use. The exterior has scratches, dullness, etc., and signs of use and installation marks (Ryo Mizusaki)
Accessories: none
Main specifications: W580×H1290×D470mm
Maintained! The classic model for professional 1" screwdrivers. It is installed in many of the company's 43 series, etc., and is a driver that is easy to balance with various woofers and tweeters (Daiki Goto)
Maintenance information: 2024.5.9 Maintained (diaphragm installation adjustment, pad dampener, mounting screw rust replacement. Waste material terminal contact part cleaning, terminal dirt cleaning, insulation bushing replacement. Diaphragm dirt cleaning. DCR (44006/55ohm diaphragm undamaged), DCR (44007/55ohm diaphragm undamaged))
Accessories: none
Main specifications: 1 inch driver, throat diameter: 25 mm, 16 ohms (measured 10/12 ohms), 118 dB, frequency characteristics, 800 Hz to 20 kHz, crossover frequency: 500 Hz or more, 5.1 kg
Maintained! A popular model from late Sansui. While promoting wider range, the sound that feels the depth and energy unique to the company is compatible with modern speakers. The punching power in the mid to low range that drives a medium bookshelf speaker is truly a word. There is a feeling of use such as dullness and abrasions (Daiki Goto)
Maintenance information: 2024.5.9 maintained (maintenance contents/TONE, loudness, subsonic, processor, input selector, power amplifier direct, source direct, tape, reckout switch disassembly, polishing grease application, output relay replacement, power supply capacitor replacement, solder repair, each volume, switch cleaning, interior and exterior inspection and cleaning, operation confirmation.)
Accessories: copy of instruction manual
Main specifications: 90W+90W NEW HYPERα-X balance circuit PHONO (MM/MC) power amplifier with direct function W430 x H162 x D452 mm 18 kg
Maintained! A class mono power amplifier developed for wideband playback. It boasts a natural and smooth playback sound, and you can feel the strength you wouldn't think of 20W. There is dullness and small scratches (Daiki Goto)
Maintenance information: 2024.5.9 maintained (maintenance details/output relay replacement for 2 units, level switch disassembly, polishing grease application, solder repair, interior and exterior inspection and cleaning, DC adjustment, running test.)
Accessories: none
Main Specifications: 20W+20W (8Ω) Pure Class A Amplifier Frequency Characteristics DC to 200kHz Pure Copper Machined SP Terminal Equipped W224 x H103 x D390 mm 6.5 kg
RCA cable, 0.7 m pair, genuine molded plug, and the honest, thick, and powerful sound with medium and low sounds, which is unimaginable from the way it looks, is addictive (Daiki Goto)
Maintenance information: 2024.5.9 continuity confirmed
Accessories: none
Speaker with active servo technology A powered speaker with a built-in power amplifier in the woofer (only the woofer part requires a power source to drive). The medium and high frequencies, which are typical of Yamaha, remain the same, and the low frequencies also come out well. It has a good balance and can be used regardless of genre (Daiki Goto)
Maintenance information: 2024.5.9 operation confirmed
Accessories: instruction manual
Main specifications: 4 way, 3 speakers, bookshelf type, W340 x H700 x D337 mm, 30 kg/1
There is no problem with the operation, but it will be handed over as is. Yamaha subwoofer. You can easily enjoy powerful sound. The high-cut filter allows you to listen in the desired range, so the range of uses also expands. The exterior has a slightly raised part on the top plate, and there is a scratch on the back corner (Mizusaki Ryo)
Maintenance information: 2024.5.9 sound output confirmed
Accessories: none
Main specifications: A-YST method anti-magnetic amplifier output 250W playback frequency band 20Hz to 160Hz high-cut filter frequency 40Hz to 140Hz continuously variable W340 x H432 x D370 mm 17 kg
※The sound output operation has been confirmed, but there is a slight band gap, and since it is cheap, it will be handed over as is. Trio quadruple varicon-type FM/AM tuner. The high range is moderate, but the fresh, thick sound that is difficult to obtain with a synthesizer tuner is attractive. The exterior has spots, small scratches, and rust spots (Mizusaki Ryo)
Maintenance information: 2015.3.4 manufacturer maintenance (The detection circuit offset has been adjusted. Other adjustments have been made to RF, detection, VCO, separation, meter, etc. (There is a contact problem with the switch and volume, but since parts are not available, the contacts have been cleaned)
Main specifications: W430 x H149 x D376 mm 8 kg
The tweeter on one side has been replaced! The successor model to the super popular “IKON Series.” It is equipped with a unit that uses wood fiber cone paper. The mid and low frequencies are rich, and the high frequencies sound smooth. You can feel the depth of the sound clearly (Daiki Goto)
Maintenance information: 2024.5.9 operation confirmed
Accessories: original box, jumper plate
Main specifications: 3 way 4 speakers, frequency characteristics, 39 Hz to 30 kHz, crossover 700 Hz, 2.6 kHz, 14 kHz, efficiency 89 dB impedance 6 ohms size W188 x D352 x H1028 mm weight 17.8 kg
A cartridge designed by the V15 type3 development team, which is synonymous with light needle pressure needles. The sound quality with a high degree of perfection, which achieves both the subtlety of MC cartridges and the stretchy sound quality due to light needle pressure elliptical needles, is attractive (Daiki Goto)
Maintenance information: 2024.5.9 continuity confirmed
Accessories: none
Main specifications: mm type output voltage 4.7 mV needle pressure 0.75 to 1.5 g playback frequency band 20-20,000 Hz channel separation 25 dB channel balance 2 dB DC resistance 1.55 kΩ dead weight 6 g
RCA cable, 1.5 m pair, genuine molded plug, and the honest, thick, and powerful sound with medium and low sounds, which is unimaginable from the way it looks, is addictive (Kojima Yosuke)
Accessories: none
MC cartridge included with the DP-32F. You can enjoy a wide range of sources with bright, punchy sound reproduction with unobtrusive sound quality (Mizusaki Ryo)
Maintenance information: 2024.5.9 sound output confirmed
Accessories: none
Main specifications: MC type output 0.3 mV playback frequency 20 Hz to 40 kHz needle pressure 1.8 ± 0.3 g
YAMAHA MC type cartridges. It plays strings and vocals with high transparency and freshness. There is rust on the cantilever (Daiki Goto)
Maintenance information: 2024.5.9 continuity confirmed
Accessories: none
Main specifications: 10 Hz to 45 kHz output voltage 0.5 mV impedance 50 ohms needle pressure 2.0 g dead weight 8 g
A standard woofer installed in A7 systems, etc. The highly efficient and clear sound is perfect for jazz, etc. A classic model with an American sound that is bright and crisp. The exterior is dull and dirty, and there are repair marks on the corn paper (Yonejima Satoshi)
Maintenance information: 2024.5.9 sweep test is good
Accessories: No accessories
Main specifications: 38cm cone woofer unit Alnico magnet frequency characteristics 20 to 1600 Hz 8 ohms weight 7.9 kg/book
PSE standard product Power strip for audio The OCB-1 series has a history of 25 years, counting from the first generation. It can be plugged into a 2P wall outlet installed in a general house, making it easy to use (Tamura Eiji)
Maintenance information: 2024.5.9 continuity confirmed
Accessories: none
Main specifications: 4 ports (125V/15A/3P power plug compatible) W120 x D120 x H60 mm (box part) approx. 0.9 kg
RCA cable 0.75 m pair high purity 6NCU (99.9999% pure copper), PCOCC, pure silver coated HIGHER-OFC, high-purity oxygen-free copper are characters that are easy to listen to with just the right amount of delicacy and volume. The cable is soft and easy to handle. As for the exterior, there is dullness around the plug (Satoshi Yonejima)
Maintenance information: 2024.5.9 continuity confirmed
Accessories: No accessories
Denon's premain amplifier combines popularity and performance. The resolution is even higher than the previous model, and the sound quality is high and the SN is smooth, and it is a powerful machine that combines the thickness and sense of energy in the mid to low range. It works flawlessly with all genres of music. As for the exterior, there are scratches on the front and dullness throughout. Serial 031501903 (Yonejima Satoshi)
Maintenance information: 2024.5.9 operation confirmed
Accessories: remote control, power cord
Main specifications: output 80W+80W (8Ω) PHONO input (MM/MC) size W434 x H181 x D435 mm weight 24 kg
1650 series SACD/CD player It is a model with a low, loud sound that makes you feel a sense of depth and scale. There is also a digital input terminal, and it can also be used as a standalone D/A converter compatible with sampling frequencies of 32 to 192 kHz. The exterior is dull (Yonejima Satoshi)
Maintenance information: 2024.5.9 operation confirmed
Accessories: remote control, power cable
Main specifications: Super Audio CD section/1 bit DSD system Playback frequency approx. 2 Hz to 50 kHz SNR 119 dB CD section/playback frequency approx. 2 Hz to 20 kHz W434 x H137 x D336 mm 13.5 kg
This bookshelf is made in England using solid wood veneer for reinforced MDF. The plumpness of the low range has been handed down since the 12th era, and the low range, which has a rich sense of volume, is attractive when it is small. You can enjoy natural sounds suitable for vocals and classical music. The exterior has scratches and several dowels broken in places on the saran net. Serial 00342B (Yonejima Satoshi)
Maintenance information: 2024.5.9 sweep test is good
Accessories: saran net
Main Specifications: Model: 2 Wave Reflex Type Crossover Frequency 2.2 kHz Output Sound Pressure Level 86 dB Rated Impedance 6 Ω Playback Frequency 45 Hz to 28 kHz W205 x H330 x D253 mm Weight 7.6 kg/book
※It is inexpensive because it is in poor condition such as paint peeling and solder marks. Electrovoice's finest horn tweeter. It is a diffraction type unique to the Electrovoice, which is slightly larger than the T35. A phenolic diaphragm with silk as the core material, and an Alnico V magnet comparable to a scoker are used for the magnetic circuit. The exterior has scratches, paint peeling, and solder marks on the terminals. One side plate is missing (Yonejima Satoshi)
Maintenance information: 2024.5.9 oscillator test is good
Accessories: No accessories
Main specifications: playback frequency band 3,500 to 15 kHz impedance 8 ohms recommended crossover frequency 3.5 kHz or higher W73 x H191 x D125 mm 3.2 kg
In addition to the flat characteristics of DL-103 yuzuri, this MC cartridge is attractive for its transparency and good granularity. Amorphous boron used in high-grade models DL-1000A and 305 is used for the cantilever. The cantilever does not bend, and the stylus is good (Murakoshi Yoichi)
Maintenance information: 2024.5.8 sound output confirmed
Accessories: needle cover, case
Main specifications: MC type output 0.12 mV playback frequency 20 Hz to 60,000 Hz needle pressure 1.2 g to 1.6 g impedance 40 ohms dead weight approx. 5.6 g
DENON's classic MC cartridge. The balance of localization and sound is excellent, and all music genres can be played without difficulty. I can recommend this cartridge to a variety of people, from analog beginners to experts (Murakoshi Yoichi)
Maintenance information: 2024.5.8 sound output confirmed
Accessories: needle cover, case
Main specifications: MC type output voltage 0.3 mV playback frequency 20 Hz to 45 kHz electrical impedance 40 ohms needle tip 16.5 microns round needle pressure 2.2 to 2.8 g dead weight 8.5 g
Woofer edge softening treatment! A classic model that uses carbon graphite for the woofer's cone paper. The high and middle ranges have a core yet are glossy, and the low frequencies are tight. It is a well-balanced speaker and is suitable for a wide range of genres. In particular, the vocals in combination with a vacuum tube amplifier are excellent. You can enjoy the enchanting diatone sound. As for the exterior, the frame has rust, scuffs, dullness, etc., and there is a feeling of use (Murakoshi Yoichi)
Maintenance information: 2024.5.7 maintenance (exterior cleaning, edge softening treatment)
Accessories: saran net
Main specifications: 3 way, 3 speakers, sealed impedance 6 ohms, W380 x H680 x D325 mm, 21 kg
※There is magic writing, and the logo plate is out of stock, so it's cheap. Good stylus! This is the first product of Audio-Technica, an MM type stereo cartridge that became a long-time seller for its well-balanced, natural sound. (MURAKOSHI Yoichi)
Maintenance information: 2024.5.7 sound output confirmed
Accessories: none
Main specifications: mm type output voltage 5 mV needle pressure 1.0 to 3.5 g (optimal 2.5 g) playback frequency band 20-21,000 Hz± 3 dB load resistance 50 kΩ DC resistance 450 Ω impedance 1.8 kohm/1 kHz needle tip 0.7 mil dead weight 9.5 g
Maintained! Stereo power amplifier equipped with output impedance control. It is a power amplifier from the heyday of separation, which is supported by a solid power supply unit and chassis, and can firmly reproduce even the smallest nuances. There are dullness and small scratches on the exterior (Tomonori Asae)
Maintenance information: 2024.5.9 Maintained (replacement of defective output relay contacts. Replace deteriorated capacitors in the power supply circuit. (Repair and adjustment within each circuit)
Accessories: none
Main specifications: rated output 120W+120W (8Ω Class B) 30W+30W (8Ω Class A) rated power consumption 330W W435 × H146 × D381 mm 21kg
Maintained! This power amplifier was released around the same time as the SG620. It combines 100W+100W driving power with good sharpness. It reproduces thick sounds unique to JBL from a simple design with only a power switch on a black body. It goes well with 70' SJBL speakers and drives exhilarating. The exterior has front scratches, bends on the power switch, scratches, and repair marks on the top plate. Serial 10623 (Yamato Yuki)
Maintenance information: 2024.3.2 Maintained (timer relay installed (speaker will be turned on 5 seconds after power is turned on. (Please turn off the VOL when the power is on). Power SW bending correction (deformation of the knob itself is not compatible). Power stage Tr check. (Replacement of Tr in the board, level VOL, fuse holder, and C in the power supply board)
Accessories: power cable
Main specifications: T-type circuit adopted 100W+100W W432 ✕ H132 ✕ D355mm 19kg
Balance cable, 3.0 m pair, oxygen-free copper, OFC Ritz line type, 2-core shield structure, a quiet, and beautiful sound without falsehood. The exterior has a feeling of use such as dullness and scratches on the plug (Tomoho Asaine)
Maintenance information: 2024.5.9 continuity confirmed
Accessories: none
※Since the Y lug is cut on one side, it is inexpensive. This line improved the design of Revisona, which is a 2.5 m pair front speaker cable line. You can enjoy pure sound with a sense of dynamism, just like a PAD. The exterior is dull and has a feeling of use (Tomoho Asaine)
Maintenance information: 2024.5.9 continuity confirmed
Accessories: none
Set of 4 A TAOC speaker stand with a high vibration damping effect. Made from high-carbon cast iron, the speaker system improves pitch, depth, and transparency. Recommended for middle class speakers. There is no felt. The exterior is dull, and there is a feeling of use over time, such as small scratches and rust stains on the bottom (Asae Tomoho)
Accessories: none
Main specifications: W100×H140×D170mm, made of high-carbon cast iron, weight 5.0 kg/1 bottle
It's cheap because it's in poor condition! *Currently sold. A horn-shaped tweeter that is familiar to the ear. The appeal is that it's easy to read, but it doesn't hit your ears, so you won't get tired of listening. On the exterior, in addition to a feeling of use such as dullness and small scratches, some terminals are damaged (Asaine Tomoho)
Maintenance information: 2024.5.9 operation confirmed
Accessories: none
Main specifications: horn type tweeter frequency characteristics 2.5 kHz to 22 kHz 8 ohms cutoff frequency 2.3 kHz recommended crossover 3.5 kHz efficiency 105 dB W83 x H83 x D94 mm 1.1 kg
High-purity OFC (oxygen-free copper/4N) is used as the 0.5m pair conductor of the XLR cable to achieve transparent sound. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Maintenance information: 2024.5.9 continuity confirmed
Accessories: none
Speaker cable 3.0 m and 2.2 m pair ends are untreated, soft, and an introductory cable that is easy to run. The medium range is easy to hear and has a sense of volume, making it perfect for upgrading from accessories. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Speaker cable 2.8 m pair ends are untreated, soft, and an introductory cable that is easy to run. The medium range is easy to hear and has a sense of volume, making it perfect for upgrading from accessories. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Maintenance information: 2024.5.9 continuity confirmed
Accessories: none
The price has been drastically reduced! 2024/1/18 sales price 49,800 yen Maintained! An American-made amplifier from the 1970s that can hardly be seen today. Circuits for self-preservation, such as security, correction, and protection, have been cut off, and I think that handsome atmosphere is well reflected in the sound. It has the same feeling of use as the model year (Daiki Goto)
Maintenance information: 2024.1.18 Maintained (check capacitors, resistors, transistors, etc. as is OK. bias check)
Accessories: none
Main specifications: size (actual measurement) W406 x H155 x D327 mm weight (actual measurement) 12.2 kg
Balance cable, 1.0 m pair, the world's purest D.U.C.C., single conductor, polyolefin insulation. Copper-laminated polyester tape & oxygen-free copper double shielding. The crisp ease of a single line is fully expressed. The exterior has a feeling of use such as dullness or rubbing (Tomoho Asaine)
Maintenance information: 2024.5.9 continuity confirmed
Accessories: none
The disposal price has been reduced! (Member prices are not applicable) 2024/3/7 sales price 79,800 yen Maintained! 120V specification SUMO control amplifier hosted by amplifier design genius James Bongiorno. Compared to amplifiers from the GAS era, the sound is cleaner, but the elastic low frequency bounce method is still alive and well. It is one that uses toroidal transformers and high quality parts, and makes you feel that they are particular about it. On the exterior, abrasions and line scratches are conspicuous on the top plate. Serial H (Yonejima Satoshi)
Maintenance information: 2024.3.25 Maintained (Earth float re-fixed. (*Since it is AC120 specification, a hum sound may occur at 100V)
2024.3.7 Maintained (internal inspection check, PHONO changeover SW, INPUT/TAPE changeover SW cleaning. Transistors, resistors, and capacitors can be checked. Operation check)
Accessories: No accessories
Main specifications: 6 inputs, 2 PRE OUT terminals, W480 x H40 x D220 mm, weight 8.0 kg
※The pedestal is missing. Super tweeter using an aluminum alloy thick cylindrical horn and an ultra-lightweight ring diaphragm. It expands the well-stretched, clean high frequency range. There are small scratches and dullness on the exterior. (YONEJIMA Satoshi)
Maintenance information: 2024.5.8 oscillator test is good
Accessories: instruction manual
Main specifications: Alnico magnet, 8Ω, playback frequency band, 5kHz to 35kHz, output sound pressure level, 106dB, recommended crossover, 7kHz or higher, input 50W, 800g/book
Maintained. Elliptical type with built-in step-up transformer. It has a rich, rich sound and sounds like an SPU. Clarity has been improved by incorporating a transformer that creates a well-balanced sound. Although it is an MC type, it can be used in the MM position. The exterior has small scratches, dullness, and a feeling of use (Katsuji Hiura)
Maintenance information: 2024.4.13 Maintained (broken cantilever, damper adjustment, vibration system replacement)
Accessories: original box needle cover
Main specifications: MC type transformer built-in elliptical needle output 10 mV playback frequency band 20 to 20,000 Hz needle pressure 3 to 4.5 g dead weight 32 g
The disposal price has been reduced. Member discounts are not applicable. 2024/4/27 sales price 1,680,000 yen Hi-Fi Hall first arrival! This is the flagship model of the current KEF Reference series. The expanse of the dynamic sound field and natural sound quality that can't be imagined from this 205mm wide seems to make you forget that this speaker is a tall boy. The exterior, with abrasions and scratches on one side, is dull, and there is only a slight feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.26 Operation confirmed
Accessories: saran net, spikes, original box
Main specifications: Unit used: 5 inch Uni-Q driver, 6.5 inch woofer x 4 crossover 450 Hz, 2.1 kHz 88 dB impedance 4 ohms W205 x H1,350 x D462 mm 60.2 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/4/2 sales price 448,000 yen This is a late C20 model that underwent full maintenance from the 2023/12 condenser to main VOL replacement. Among Mackin's control amplifiers, this is a popular gem with a particularly rich, glossy tone. Not only jazz, but also the vocal sounds are excellent. The unique, rich, and highly artistic tone shows a particularly good compatibility with vintage speakers. Exterior, front panel characters disappear a lot, dullness, small scratches, abrasions, etc., and there is a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.2 maintenance completed (1/2 W resistor replacement and 3 noise countermeasures replaced) 2023.12.19 maintenance (vacuum tube 6X4, block capacitor, electrolytic capacitor, film capacitor, oil capacitor, resistor, main volume replacement. Gang error correction resistance 1/2 W added, switching noise reduction resistance 1/4 W added. RCA jack and vacuum tube socket caulk repair, operation check.)
Accessories: none
Main specifications: tubular phono 2 system phono equalizer curve variable use vacuum tube ECC83 x 5 ECC82 x 2 EZ90 x 1 W440 x H165 x D316 mm 8.7 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/4/23 sales price 99,800 yen, genuine Rin Japan product. A network audio player. It has a simple and modern European design, so you can enjoy a bright sound without getting tired of listening. Not only is it compatible with the LINN system, but it is also equipped with digital output and variable line level output functions not found in the KLIMAX DS and AKURATE DS. There is a thin scratch on the top plate. ※The display is slightly dark, but this is the current situation. Serial 1255165 (Fujisawa Yukishi)
Maintenance information: 2024.4.23 Operation confirmed (Ver. 4.104.518)
Accessories: remote control, power cord
Main specifications: Compatible sampling frequencies 44.1K, 48K, 88.2K, 96K, 176.4K, 192K compatible bits 16-24 bits, output terminals RCA phono (fixed/variable line level output), RCA phono coaxial (digital output) W381 x D360 x H80 mm 4 kg
The disposal price has been reduced! Member prices are not applicable. 2024/4/21 sales price 99,800 yen This is DALI's HELICON series center speaker. If you use the company's HELICON series and are considering surround, please give it a try. The exterior is dull. Serial 7660180 (Fujisawa Yukishi)
Maintenance information: 2024.4.21 operation confirmed
Accessories: original box, saran net
Main specifications: 4Ω playback frequency band 49Hz to 27kHz W650 ✕ H210 ✕ D435mm weight 18.4 kg
The price has been drastically reduced! 2024/4/23 sales price 258,000 yen Maintained! Comes with a cabinet. Genuine Electri 100V specification. Macintosh's classic preamp. It reproduces bright, glossy tones with clear mid-range sounds. This model should be used by music fans who enjoy all kinds of sources. The fact that it has a full range of functions, such as a 5-band equalizer and a 7-source input selector, is also attractive. There is a scratch on the cabinet and a crack in the mounting plate. Serial JEB7808 (Fujisawa Yukishi)
Maintenance information: 2024.4.23 Maintained (panel peeling fix. Polishing grease applied to all push switch disassembly contacts. Rotary switch contact cleaning. Volume contact cleaning. Electrolytic capacitor replacement, panel lamp replacement. (Check the operation of each input/output)
Accessories: No accessories
Main specifications: Equalizer up and down 12dB (center frequency/30Hz/150Hz/500Hz/1.5kHz/10kHz) rated output 20W+20W (8Ω) W445 x H192 x D390 mm 11.8 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/4/30 sales price 328,000 yen The MK2 model has further improved its degree of perfection since the HELICON 400. A speaker where you can feel the craftsmanship of a manufacturer called DALI. Not only does the cherry color give you a sense of luxury, but the high mid-high range with a unique luster and texture is attractive. The fresh, glossy tone of stringed instruments and female vocals is one of the best in the world. There are scratches and bumps on the exterior. Serial 7720477, 7720477 (Fujisawa Yukishi)
Maintenance information: 2024.4.30 Operation confirmed
Accessories: instruction manual, spike, spike holder, jumper cable, saran net
Main specifications: 3 way 4 speakers, bass range 165 mm, cone type x 2, treble range, 25 mm, soft dome, 10 x 55 mm, ribbon tweeter, banana plug compatible impedance 4 Ω, efficiency 88 dB, W264 x H1,026 x D490 mm, weight 31.7 kg
The price has been drastically reduced! 2024/5/5 sales price 218,000 yen A special edition model commemorating the 70th anniversary of JBL's founding. The latest version that has been refined over the traditional 4312 series. A 12-inch diameter woofer unit equipped with the advanced 4429 is used. It is an all-round speaker with a sense of energy and good range extension. The exterior is dull. Serial 3072/3073 (Yonejima Satoshi)
Maintenance information: 2024.5.5 sweep test is good
Accessories: saran net
Main specifications: 3-way bass reflex type 300mm woofer 125mm mid-range 25mm tweeter impedance 6Ω output sound pressure level 90dB frequency characteristics 44Hz to 40kHz W362 x H597 x D298 mm 25.2 kg
The price has been drastically reduced. 2024/5/6 sales price 998,000 yen*The front panel is 20.6L, but it is an upgraded product starting at 20. Maintained! Genuine Harman The excellent separation unique to mono and the excellent sense of shading of the sound give off a unique difference, and even large aperture woofers drive well. Also, the slightly sweet, and comfortable sound similar to ML-2L is attractive. It still makes music fans groan. There are scratches and small scratches on the exterior. Serial 666/665 (Sasaki Shota)
Maintenance information: 2024.4.15 Maintained (1 deteriorated transistor replaced. Other inspections and adjustments have been made) 2023.7.20 maintained (connector contact between the heat sink board and main board has been corrected. Tr, capacitor and resistor exchange. Part of the board solder is re-soldered. Attach the Fisher plug to the SP cable. (Other inspections and adjustments)
Accessories: copy of instruction manual, power cable, Fisher to SP cable, 2 Remo pins, balance short pins
Main specifications: mono power amplifier effective output 100W (8Ω) input/unbalance (RCA) 1 system, balance (XLR) 1 system, 1 SP terminal system W483 ✕ H210 ✕ D560 mm weight 33 kg/unit
The price has been reduced! 2024/5/6 sales price 29,800 yen 6 month warranty. Fourth generation model of Victor's masterpiece speaker SX-500 series representing the 90s. Alnico magnets are used in all units, and the woofer unit has particularly excellent low-level reproducibility, contributing to improved clarity and good tone during quiet sounds. The exterior has scratches and dullness over time. Serial 10800021 (Yamato Yuki)
Maintenance information: 2024.5.6 sweep test is good
Accessories: none
Main specifications: 2 way, 2 speakers, sealed system, bookshelf type, anti-magnetic type, 20 cm cone type for low range/3.5 cm dome type impedance 6 Ω for high frequency, output sound pressure level 90 dB, W270 x H454 x D 293 mm, weight 12.5 kg/book