An audio selector that allows you to easily switch between a total of 3 devices. Comes with a front input terminal. Compatible with φ3.5 stereo mini You can see a feeling of use such as appearance, dullness, scratches, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: 3 input terminals (φ3.5 mm stereo mini, audio L/R), 1 output terminal (φ3.5 mm stereo mini, audio L/R) W190 x D85 x H32 mm approx. 210 g
Cover is missing. Unspecified digital needle pressure gauge. It is a digital needle pressure gauge that can measure up to 5g in 0.01 g increments. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.23 Operation confirmed
Accessories: none
SPU-A shell conversion plug It is an adapter that allows short pitch A-shell cartridges to be attached to general tone arms. There is a slight dullness. (FUJISAWA KOSHI)
Maintenance information: 2024.5.27 continuity confirmed
Accessories: No accessories
Digital sound repair machine. By predicting an ultra-high frequency range of 20 kHz or more and outputting it in addition to the original sound, it feels smooth, and the sound quality changes to very comfortable to listen to. There are no conspicuous scratches*Additional terminals have been added, but they cannot be used for both input and output (Sasaki Shota)
Maintenance information: 2024.5.26 Operation confirmed ※Additional terminals cannot be used for both input/output
Accessories: none
Main specifications: 1 RCA input/RCA output each, 5 stage effect switching size W132 x H71 x 334 mm weight 960 g
A line selector that can be easily switched with an RCA connection. It can also be used for 4 input systems, 1 output system or 1 reverse input system, and 4 output systems, making it convenient to switch between multiple amplifiers and sources. There is a feeling of use on the exterior, such as minor corrosion and dullness (Kanai Hidetsugu)
Maintenance information: 2024.5.21 continuity confirmed
Accessories: none
Main specifications: 1 system/4 system input/output W160 x H65 x D95 mm 530 g
A speaker stand that suppresses standing waves around the speaker by placing the speaker at an angle to the horizontal or vertical direction. Acoustical characteristics can be obtained so that the entire room is enveloped in sound. Comes with exclusive sorbocaine (Kojima Yosuke)
Accessories: none
Main specifications: bottom surface W125 x D125 mm top plate φ60 height 190/145/110/90 mm weight 1.5 to 1.6 kg (actual measurement) /book
marble turntable seat Its own weight is approximately 1.8 kg, so it is recommended for turntables with high torque. The exterior has a feeling of use such as dullness and dirt (Takahashi Nobuyuki)
Main specifications: Weight 1.8 kg (actual measurement)
A multi-combination structure that allows you to select 7 weights by combining 3 types of stabilizers. It makes it possible to fine-tune the sound quality for each record, and it can also be used on record players that are not compatible with heavy stabilizers. (FUJISAWA KOSHI)
Accessories: instruction manual
Main specifications: W69 x H27 mm (when all parts are attached) under (polycarponet) 70g inner (brass+gold plated) 90g upper (brass+uredium plated) 160g
Tokyo soundproof turntable seat using vibration-absorbing rubber. The vibration convergence time is overwhelmingly fast, and it effectively absorbs unwanted vibrations in the frequency band that is important for music playback. (FUJISAWA KOSHI)
Accessories: case
Main specifications: size 4 mm thick x 291 mm diameter weight 330 g
Comes with original box! Antistatic brush for audio Uses the core-sheath composite conductive acrylic fiber “COREBRID TMB/Core Brid TMB,” which was developed by Mitsubishi Chemical Corporation and is the only one produced in the world. Produced domestically using traditional manufacturing methods, this brush removes static electricity from analog records, CDs, Blu-rays, etc., so you can enjoy the original sound quality and images. (FUJISAWA KOSHI)
Accessories: original box
This is a turntable sheet using TEAC Japanese paper. In order to solve the problem of dust adsorbing on vinyl records, Japanese paper that is less likely to charge electricity is used. We use stone paper with an appropriate amount of mass. (FUJISAWA KOSHI)
Accessories: case
Main specifications: W300 x H300 x D1 mm, weight approx. 44 g
This is an adapter for a NAGAOKA doughnut board. I use it for EP playback, but the machined aluminum gives it a sense of luxury. There is a small scratch. (FUJISAWA KOSHI)
Accessories: No accessories
Main specifications: machined aluminum, diameter 40 x height 9 mm, weight 20 g
Comes with original box! Digital needle pressure gauge for analog record players. Compatible with measurements from 0.01g to a maximum of 200g. The tray has a layout that makes it easy to place needles. The LCD screen is backlit and equipped with an auto off function. (FUJISAWA KOSHI)
Maintenance information: 2024.5.23 Operation confirmed
Accessories: original box, case
Main specifications: AAA battery specification W93 x H17 x D115 mm dead weight 115.5 g
Set of 6 An insulator that uses Honeynight, which Technica is proud of. The 4-layer hybrid structure is compact yet has an excellent damping effect. The base material is a luxurious machined brass. There are some small scratches and dullness. (FUJISAWA KOSHI)
Accessories: No accessories
Main specifications: Honeynight, a hybrid structure, and special anti-vibration rubber, are effectively arranged, load capacity 5 kg (1 piece), W30 x D17 mm, weight approx. 65 g/piece
Set of 6 An insulator that uses Honeynight, which Technica is proud of. The 4-layer hybrid structure is compact yet has an excellent damping effect. The base material is a luxurious machined brass. There are a few small scratches and dullness. (FUJISAWA KOSHI)
Accessories: No accessories
Main specifications: Honeynight, a hybrid structure, and special anti-vibration rubber, are effectively arranged, load capacity 5 kg (1 piece), W30 x D17 mm, weight approx. 65 g/piece
Set of 4 An insulator that uses Honeynight, which Technica is proud of. The 4-layer hybrid structure is compact yet has an excellent damping effect. The base material is a luxurious machined brass. There are a few small scratches and dullness. (FUJISAWA KOSHI)
Accessories: No accessories
Main specifications: Honeynight, a hybrid structure, and special anti-vibration rubber, are effectively arranged, load capacity 5 kg (1 piece), W30 x D17 mm, weight approx. 65 g/piece
Set of 4 Audio-Technica's banana plug screw tightening method. It is a rear connection type that allows easy speaker settings, and is compatible with banana jacks with a diameter of 4 to 4.5 mm. (FUJISAWA KOSHI)
Accessories: No accessories
Set of 4 Audio-Technica's banana plug screw tightening method. It is a rear connection type that allows easy speaker settings, and is compatible with banana jacks with a diameter of 4 to 4.5 mm. (FUJISAWA KOSHI)
Accessories: No accessories
Set of 4 Audio-Technica's banana plug screw tightening method. It is a rear connection type that allows easy speaker settings, and is compatible with banana jacks with a diameter of 4 to 4.5 mm. (FUJISAWA KOSHI)
Accessories: No accessories
Set of 4 Audio-Technica's banana plug screw tightening method. It is a rear connection type that allows easy speaker settings, and is compatible with banana jacks with a diameter of 4 to 4.5 mm. (FUJISAWA KOSHI)
Accessories: No accessories
Set of 4 Audio-Technica's banana plug screw tightening method. It is a rear connection type that allows easy speaker settings, and is compatible with banana jacks with a diameter of 4 to 4.5 mm. (FUJISAWA KOSHI)
Accessories: No accessories
Set of 4 Quadraspires VENT black poles How about for an addition or replacement? There is some paint peeling on the exterior (Tamura Eiji)
Accessories: none
This is a double arm cabinet DK-2300 ideal for DP-80 and DP-75. The arm board can be easily removed with screws. One side of the armhole appears to be for the SME3012. Compatible models are unknown on the other side, and there is a 30mm diameter hole. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: insulated 70mm laminated plywood twin arm specification W600 x H101 x D 500 mm weight approx. 15 kg
Unspecified record player cabinet. Unprocessed The double arm is also mountable, and the construction is solid. If you've been looking for one, please take this opportunity. The appearance is fine, with no noticeable scratches, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: W602 x H145 x D535 mm 13 kg (actual measurement)
Unopened brand new (opened for photography) arm lifters that can smoothly operate tone arms without lifters, such as the RMG309i and RMG212i orthophone. Can also be used on the company's old models with a rotating shaft diameter of 20 mmφand RMA types for A shells (Oikawa Tetsuji)
Accessories: original box
Brand new and unused item (opened for photography) A slide base that allows you to use an orthophone's RMG/RMA etc. arm by using it in a hole for the SME 3009 or 3012. The shaft diameter is 20mm (Oikawa Tetsuji)
Accessories: screws, tools
Accuphase F-5/F-15 crossover frequency 12500 Hz board. The exterior is good with a dullness (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: original box
Main specifications: crossover frequency 12500 Hz attenuation characteristics 12 dB/oct・-18 dB/oct switchable
Frequency board for Accuphase channel divider F-5/F-15 The crossover is 800 Hz, which is easy to use! The attenuation slope can be changed to -12 dB/oct and -18 dB/oct with an internal switch. The exterior is good, with a slight dullness (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: original box
Main specifications: F-5/F-15/F-15L crossover 800 Hz attenuation characteristics -12/-18 dB switching
Comes with original box! Digital needle pressure gauge for analog record players. Compatible with measurements from 0.01g to a maximum of 200g. The tray has a layout that makes it easy to place needles. The LCD screen is backlit and equipped with an auto off function. The exterior has a feeling of use such as dullness (Hiroki Aso)
Maintenance information: 2024.5.20 Operation confirmed
Accessories: none
Main specifications: AAA battery specification W93 x H17 x D115 mm dead weight 115.5 g
Includes optional weight SD-33B (7,000 yen)! Stabilizer with stroboscope. The sound definitely tightens up when used. The exterior has a feeling of use such as dullness and small scratches (Hiroki Aso)
Accessories: none
Main specifications: brass diameter 80 mm x thickness 43 mm 730 g + 730 g = 1,460 g
3P inlet plug Pure copper with high conductivity is used for the blade to ensure rigidity. The contacts are models that use rhodium plating treatment and α-process treatment (ultra-low temperature treatment & special electromagnetic field treatment). (TAMURA Eiji)
Accessories: case
※Since the terminal is broken in one place, it is inexpensive. Classic speaker selector. It is a convenient unit for outputting from 1 input system to 4 systems, or conversely, outputting 4 input systems to 1 system. There are scratches and dullness on the exterior. Serial 121-1 G1 (Satoshi Yonejima)
Maintenance information: 2024.5.18 continuity confirmed
Accessories: instruction manual
Main specifications: 1 system/4 system input/output W160 x H65 x D95 mm 530 g
Comes with original box! LUXMAN's classic line selector. It is an easy-to-use and convenient model that outputs from 1 input system to 4 systems, and conversely, outputs from 4 input systems to 1 system. Fairly good condition. Serial 2509-1G2 (Fujisawa Yukishi)
Maintenance information: 2024.5.18 continuity confirmed
Accessories: instruction manual, original box
Main specifications: 1 system, 4 systems input/output W160 x H65 x D95 mm, 530 g
Set of 4 banana plugs. High sound quality solderless (no solder). This is a banana plug with a screw fastening system. This plug is orthodox and easy to use. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Accessories: none
Set of 4 banana plugs. High sound quality solderless (no solder). This is a banana plug with a screw fastening system. This plug is orthodox and easy to use. The exterior has a feeling of use such as dullness or oxidation. (ASAINE Tomonori)
Accessories: none
Metal speaker stand from unknown manufacturer. It seems that there is a sand-based damping material inside. There is a screw hole on the bottom to attach a spike (Murakoshi Yoichi)
Accessories: none
Main specifications: top surface 220 x 240 mm W280 x H642 x D341 mm 14.8 kg
This is a set of 4 AET y rugs. Surface treatment is performed using plating with a content of 99% or more of precious metals (Murakoshi Yoichi)
Accessories: none
Main specifications: width 12 mm, length 23.5 mm
A passive attenuator that uses DALE NS-2B, a non-inductive wire winding resistor. The input impedance is 10 kΩ, and the maximum attenuation is possible to approximately -58 dB. The 23-contact VOL can be attenuated at approximately -2.5 dB. It has a careful finish that focuses on solid aluminum knobs, internal wiring, and even each part. (FUJISAWA KOSHI)
Maintenance information: 2024.5.17 Operation confirmed
Accessories: No accessories
Main specifications: W112 x H68 x D155 mm (including knob terminals)
Granite speaker stand by Ishizo Unkei. It has been mirrored and has a careful finish. It contributes to damping the vibration and tightening of the sound of small speakers (Ryo Mizusaki)
Accessories: none
Main specifications: top plate W160 x D220 mm bottom surface W220 x D270 mm height 605 mm weight 17.3 kg
※The spikes are out of stock, so it's cheap. A perfectly sized round top plate is used for B&W's “805 Series”. This speaker stand is made of lightweight magnesium alloy with a high vibration absorption rate (Shota Sasaki)
Accessories: none
Main specifications: top plate W226 x D304 mm bottom plate W238 x D317 mm height 600 mm weight 14 kg
GT SONIC's compact ultrasonic cleaner for commercial use. It's not for audio only, but it seems that it can be used for quite a variety of purposes. I think the size is good too. If you've been looking for one, take this opportunity. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.14 Operation confirmed
Accessories: power cord, original box
Main specifications: ultrasonic power consumption 150 W power supply AC 100-120 V 50/60 Hz ultrasonic frequency 40,000 Hz cleaning tank size: W155 x H150 x D300 mm body size: 180 x 310 x 330 mm 5.9 kg
XLR cable 3ch line selector High quality parts are used for the changeover switch, connector, and internal wiring, and the original sound quality is conveyed as it is. You can select up to 3 amplifiers (pre-amplifier or pre-main amplifier) for 1 source device. Also, you can select up to 3 source devices to be switched for 1 amplifier (preamp or premain amplifier). You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.14 continuity confirmed
Accessories: none
Main specifications: 1 input/3 output systems GND common to all input/output W250 x H64 x D117 mm 2.3 kg
A stabilized power supply that improves sound quality by supplying a stable power source with very little noise to USB devices in place of PC bus power. It plays a part in upgrading the USB data you have (Murakoshi Yoichi)
Maintenance information: 2024.5.11 sound output confirmed
Accessories: AC adapter
Main specifications: AC100V output voltage DC5V maximum current 500mA input terminal Neutrik USB B type connector output terminal high quality USB cable approx. 10 cm+B type plug W97 x H31 x D39 mm
Pioneer ceramic straight arms. This is a genuine arm for the company's record player, and is also compatible with PL-70L2 and P3a (Satoshi Yonejima)
Maintenance information: 2024.5.15 continuity confirmed
Accessories: No accessories
Main specifications: straight arm pipe compatible player PL-7L PL-70L2 P3a, etc.
A ham eraser that can input 1000 VA with 2 inputs. It is mainly effective with front-end devices such as CD players and amplifiers. Delicate and highly transparent sound quality can be obtained due to improved SNR, and clear, high-definition images can be obtained in video systems. PSE standard product. There is dirt on the exterior (Yonejima Satoshi)
Maintenance information: 2024.5.15 Operation confirmed
Accessories: No accessories
Main specifications: 2 input outlets W130 x H94 x D267 mm (without protrusions) approx. 2.0 kg
The price has been reduced! 2023/5/15 sales price 19,800 yen A new-concept connected tap equipped with a surge absorber (lightning protection) and noise filter in one package. It has contributed greatly to further improvements in S/N and sharp sound quality that is transparent yet makes you feel dynamic. There are no noticeable scratches on the exterior. Serial 38600KK042 (Yonejima Satoshi)
Maintenance information: 2024.5.15 continuity confirmed
Accessories: No accessories
Main specifications: W56 x H35 x D233 mm (including connected outlets) 620 g
Quadra Spire Center Speaker Stand This stand allows you to adjust the angle according to the listening position. As for the exterior, felt is attached to the bottom (Tamura Eiji)
Accessories: No accessories
Main specifications: W375 x H111 x D290 mm
Solid brass machined short pin for RCA terminals. Attach it to the input terminal of an audio device to stabilize the input circuit. The exterior has dullness and light threads (Satoshi Yonejima)
Accessories: original box
Main specifications: set of 8, solid machined brass, 24k gold plated, length 28.5 x diameter 12 mm, weight 12.5 g/piece
Comes with casters A large audio board with excellent robustness and vibration damping. Particleboard material It is suitable for placing speakers and large power amplifiers. The appearance is fine, with no noticeable scratches, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: total load capacity 100 kg W590 x H105 x D550 mm 6.5 kg