The disposal price has been reduced! (Member prices are not applicable) 2023/12/7 sales price 25,000 yen ※The dedicated earth cable is out of stock. Since the cable is soldered to the connection part, it is inexpensive. A sandwich structure with an electromagnetic wave absorbing sheet sandwiched between two aluminum panels. Both sides of the aluminum panel are dark gray and light gray and can be reversed for use. The exterior has line scratches and tape marks (Tamura Eiji)
Main specifications: W470 x H7 x D420 mm weight 3.4 kg
The disposal price has been reduced! (Member prices are not applicable) 2023/12/7 sales price 25,000 yen ※The dedicated earth cable is out of stock. Since the cable is soldered to the connection part, it is inexpensive. A sandwich structure with an electromagnetic wave absorbing sheet sandwiched between two aluminum panels. Both sides of the aluminum panel are dark gray and light gray and can be reversed for use. The exterior has line scratches and tape marks (Tamura Eiji)
Accessories: No accessories
Main specifications: W470 x H7 x D420 mm weight 3.4 kg
The disposal price has been reduced. Member prices are not applicable. 2024/4/22 sales price 6,000 yen SOULNOTE spike base. How about the fans? There is a feeling of use (Daiki Goto)
Accessories: none
Main specifications: diameter 35 mm, height 7 mm, weight 47 g (actual measurement)
The disposal price has been reduced. 2024/4/22 sales price 6,000 yen SOULNOTE spike base. How about the fans? There is a feeling of use (Daiki Goto)
Accessories: none
Main specifications: diameter 35 mm, height 7 mm, weight 47 g (actual measurement)
A ceiling hanging bracket that can be used with BOSE's 100 series, etc. Comes with a safety wire to prevent falling. The installation surface can be rotated 360°, and it has one joint. There is a slight feeling of use such as dullness (Mizushima Itsuro)
Accessories: none
Main specifications: W100 x H170 (straight out) x D100 mm Speaker mounting part W85 x D40 mm (main body mounting screw pitch 60 mm)
Set of 4 Caldas jumper plates It is machined copper. There is an abrasion on the lug part (Murakoshi Yoichi)
Accessories: none
Main specifications: length from lug center to lug center: 37mm; lug inner diameter: 6mm
※It has a cigarette smell, so it's cheap. Set of 4 WOOD BLOCK INSULATOR MADE BY CORAL. It is built with a sense of stability and can be used with a wide range of speakers from medium to large. The exterior is dirty, scratched, etc. ※Felt is attached to the top plate (Satoshi Yonejima)
Accessories: No accessories
Main specifications: W100×H190×D390mm 5.2 kg/bottle
PSE standard product. Recommended parts for those looking for a high quality slim connector. It is a neutral character with no quirks. There are abrasions ※ cord bushing is missing (Tomoho Asaine)
Accessories: none
Main specifications: maximum diameter standard 8.5 mm/maximum 13.0 mm (when cord bushing is removed)
※Cleaning solution is not included. VPI's classic vacuum record cleaner. Attach the record to the turntable, apply cleaner liquid, clean it with a brush, and then use a vacuum method to strongly suck fine dust and dirt that has entered the disc's groove. There is a dent in the corner
Maintenance information: 2024.5.3 operation confirmed (rotation, vacuum OK)
Accessories: instruction manual, power cable
Main specifications: W394 x H235 x D362 mm 12.7 kg
Outlet plate with Super Cryo treatment. It is a high-grade cryo-treated outlet plate that provides high resolution and freshness (Asaine Tomoho)
Accessories: none
Main specifications: 70 x 115 mm approx. 33 g
The company's SONICA DAC remote control unit*Please check the manufacturer's website for operating environments, etc. (https://www.oppodigital.jp/discontinued-product/sonica-dac/)(及川 Tetsuji)
Maintenance information: 2024.5.3 operation confirmed
Accessories: none
Fidelity-Research 5-head shell keeper You can store it while the cartridge is attached to the shell. It's dull (Oikawa Tetsuji)
Accessories: none
Main specifications: W300 x H45 x D125 mm approx. 540 g
A set of 4 small mini pottery blocks made by Noritake, famous for its high-grade tableware. Compared to TAOC, etc., the impression is that the sound is gentle. The exterior has stains like tape marks on one side, dullness, and a feeling of use (Murakoshi Yoichi)
Accessories: original box
Main specifications: 80 x 100 x 200 mm
The price has been reduced. 2024/4/29 sales price 45,000 yen Luxman high quality speaker selector. It's a long-running model. The discrete design where each ground circuit is switched, and 6N wires are used for internal wiring, etc., and the special configuration typical of the company shines. Speaker terminals are also compatible with banana and Y lug terminals (Oikawa Tetsuji)
Maintenance information: 2024.4.29 continuity confirmed
Accessories: none
Main specifications: 1 input system, 3 SP output systems, W370 x H71 x D164 mm, 3 kg
Set of 4 Technica's classic banana plug. Insert the core wire that has been stripped of the cable coating into the hole on the side of the product and tighten the product back in place to fix the cable. Oxidation and dullness can be seen on the exterior due to use over time (Murakoshi Yoichi)
Accessories: none
※1 sheet only. melamine veneer, cast iron powder, high density wood board. This board has a 5-layer structure of phenolic laminated boards and has a beautiful wood grain. It has a thick, orthodox sound. The exterior has line scratches and tape marks on the bottom (Fujisawa Yukishi)
Accessories: No accessories
Main specifications: W450 x D500 x H40 mm approx. 7 kg
Audio-Technica connectable cartridge capsule. One can be stored while the headshell is attached. The exterior has scuffs, dullness, and a feeling of use (Katsuji Hiura)
Accessories: none
Main specifications: W51×H85×D51mm
The 2 shelves are missing and the dowels are missing and cannot be set. A horizontal AV rack designed with heat dissipation and wiring work in mind. Large TVs can be installed. Up to 6 amplifiers, devices, etc. can be stored. You can see the exterior, overall dullness, large abrasions, etc. (Kobayashi Hitoshi)
Accessories: 2 shelves (no missing dowels in the set)
Main specifications: W1202 x H732 x D582 mm load capacity/overall/top plate/shelf board/bottom plate 300/150/50/150 kg mass 83 kg
Jumper wire 18mm (High), 14mm (Low) pair end Y lug specification Caldas tri-wire jumper cable. The model number is unknown. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.20 Continuity confirmed
Accessories: none
This is a 12 dB/oct passive type filter used when playing back SP records on an ELP laser turntable. Removes noise in the high and low frequencies of SP records. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.1 sound output confirmed
Accessories: instruction manual
Main specifications: cutoff frequency continuously variable low 300 Hz or less, high 2 kHz or more continuously variable W200 x H68 x D170 mm kg
Strong casters are used, making it convenient to move heavy equipment and large speakers. In addition to peeling veneer on the exterior and sides, a feeling of use can be seen such as dullness, scratches, and abrasions (Kobayashi Hitoshi)
Accessories: none
Main specifications: W626 x H126 x D570 mm 14 kg
The price has been reduced. 2024/4/29 sales price 9,000 yen. ※Unused item. *Set of 3. A gradation cast iron insulator that firmly supports equipment with heavy construction. The excellent damping properties of cast iron and the vibration blocking effect of pinpoint support make the mid to low frequencies clear, and accurate sound images can be obtained (Hiura Katsuji)
Accessories: original box
Main specifications: diameter 60 x height 45 mm weight 800 g/piece plate diameter 35 x height 5 mm weight 40 g/piece
The price has been reduced! 2024/4/27 sales price 29,800 yen Krypton speaker stand. It has a simple design, and a base containing iron ball sand with the same specifications as an audio board is used as the base. The size is ideal for small speakers, etc. There are small scratches on the exterior (Tamura Eiji)
Accessories: instruction manual
Main specifications: W249 x H620 x D325 mm top plate W200 x D260 mm weight 7.2 kg/unit
2 pcs per pair A convenient plug adapter for tight spaces or when you want to convert. There is oxidation on the exterior (Yonejima Satoshi)
Accessories: No accessories
Center spindle oil for TECHNICS SP-10MK2. Lubricating 2-3 drops once every 2000 hours is sufficiently effective (Asaine Tomoho)
Accessories: original box
Speaker stand for YAMAHA NS-05 and NS-1 Perfect for other companies' small speakers (Takasaki Atsushi)
Accessories: none
Main Specifications: Speaker Stand External Dimensions W250 ✕ H385 ✕ D330 mm Weight 4.0 kg
※It is cheap because it is out of stock and is a spike replacement. A speaker stand that fits the top plate perfectly with JBL's signature speakers 4312, 4425, and 4428 series. Control the sound by filling the pillars with cast iron powder. The sound is like a control monitor with a sharp focus. The exterior has strokes and bruises (Tamura Eiji)
Accessories: spikes (replacement)
Main specifications: top plate W360 x D293 mm bottom plate W440 x H334 x D370 mm (actual measurement) weight 29 kg/bottle
Audio-Technica connectable cartridge capsule. One can be stored while the headshell is attached (Tamura Eiji)
Accessories: No accessories
Main specifications: W51×H85×D51mm
Audio-Technica connectable cartridge capsule. One can be stored while the headshell is attached (Tamura Eiji)
Accessories: No accessories
Main specifications: W51×H85×D51mm
Tigron's 3-disc tuning spacer suppresses complex resonance that occurs in the installation environment of audio equipment, musical instrument amplifiers, etc., and brings out the original performance of the device. There are footprints and a sense of use (Oikawa Tetsuji)
Accessories: original box
Main specifications: size, diameter: 70 mm, thickness: 3 mm, material: special heat-resistant synthetic rubber, magnesium alloy, load capacity: 30 kg/1 piece
Heavyweight marble board Perfect as a speaker base or as a base for mono power amplifiers. The surface is polished, and the sides and back are not as smooth as the front. On the exterior, you can see a small chip on the back corner (Oikawa Tetsuji)
Accessories: none
Main specifications: Size: W400 x D500 x H50 mm 24.8 kg
Comes with original box! LUXMAN's classic line selector. It is an easy-to-use and convenient model that outputs from 1 input system to 4 systems, and conversely, outputs from 4 input systems to 1 system. Fairly good condition. Serial 2222-5M2B (Fujisawa Yukishi)
Maintenance information: 2024.4.29 continuity confirmed
Accessories: instruction manual, original box
Main specifications: 1 system, 4 systems input/output W160 x H65 x D95 mm, 530 g
Amplifier/Speaker Selector It can be used to switch between 3 amplifiers and 2 sets of speakers (or 3 sets of speakers and 2 amplifiers). High quality, which pays attention to the quality of domestic cables, is selling well. There is a slight feeling of use (Takasaki Atsushi)
Maintenance information: 2024.4.28 continuity confirmed
Accessories: none
Main specifications: 24K gold-plated speaker terminal compatible with both stripped wire and banana plug input 3 (L/R) /output 2 (L/R) or input 2 (L/R) /output 3 (L/R) dimensions H55 x W200 x D175 mm, weight approx. 1.4 kg
It is a Schumann resonance wave (7.83 Hz) generator that increases the S/N ratio by canceling electromagnetic waves etc. generated from the entire audio equipment. To use it, power the included AC adapter from an electrical outlet and place the main unit as high as possible in the room (1 m 50 cm or more). There is no noticeable damage to the exterior (Kobayashi Hitoshi)
Maintenance information: 2024.4.20 Operation confirmed (power can be turned on, effect not measured)
Accessories: power cable
Main specifications: Schumann resonance wave (7.83 Hz) generator input voltage 12V W140 × D170 × H50 mm 220 g
PSE standard product. A 3P5 port power strip made by BELDEN. This is a long-selling model of audio taps. Equipped with a ground terminal. The degree is generally good (Murakoshi Yoichi)
Maintenance Information: 2024.4.27
Accessories: original box
Main specifications: W51×H32×D278mm 0.6 kg
It is an audio selector (passive type) for Real Acoustics Studio. There are 4 input systems and 1 output system. It is an easy-to-use car with VOL. There are line marks on the exterior (Hiura Katsuji)
Maintenance information: 2024.4.28 sound output confirmed
Accessories: instruction manual connection cable original box
Main specifications: W150 x H60 x D120 mm weight 464 g
The price has been reduced. 2024/4/26 sales price 20,000 yen A convenient speaker selector that can connect 3 sets of speakers to 1 amplifier. Also, it is possible to switch between 3 amplifiers for 1 set of speakers. A simultaneous bipolar switching system has been adopted, and low contact resistance has been achieved by silver plating on the switch contacts and gold plating on the terminals. There is dullness and strong discoloration in the terminal (Murakoshi Yoichi)
Maintenance information: 2024.4.25 continuity confirmed
Accessories: none
Main specifications: W250 x H60 x D150 mm 1.2 kg
KRIPTON line transformer. Use it by placing it between the CD player and the control amplifier. It changes smoothly into expressive power, so it is also suitable for long listening. There are some tape marks on the exterior. Serial 0607119 (Fujisawa Yukishi)
Maintenance information: 2024.4.28 Operation confirmed
Accessories: No accessories
Main specifications: frequency characteristics 10 Hz to 100 kHz W135 x H90 x D126 mm, weight 1.2 kg
Built-in digital input board. Digital music signals from digital devices can be input. Equipped with coaxial and optical fiber input terminals. There is a feeling of use such as dullness. Serial G2Y425 (Takasaki Atsushi)
Maintenance information: 2024.4.28 Operation confirmed
Accessories: none
Main specifications: Sampling frequency 32 kHz to 96 kHz, 24 bit digital input optical, 1 coaxial system, automatic switching between coaxial/optical input, equipped with automatic recognition function for sampling frequency, bit rate, and de-emphasis compatible models C-2000, C-245, CX-260, E-213, E-307, E-308, E-408, E-530, E-550
Amplifier/Speaker Selector It can be used to switch between 3 amplifiers and 2 sets of speakers (or 3 sets of speakers and 2 amplifiers). High quality, which pays attention to the quality of domestic cables, is selling well. There is a slight feeling of use (Takasaki Atsushi)
Maintenance information: 2024.4.28 continuity confirmed
Accessories: none
Main specifications: 24K gold-plated speaker terminal compatible with both stripped wire and banana plug input 3 (L/R) /output 2 (L/R) or input 2 (L/R) /output 3 (L/R) dimensions H55 x W200 x D175 mm, weight approx. 1.4 kg
A record stabilizer that can be used properly with an LP/EP board on the front and back. There is a hole so that the EP adapter fits, so you can use it while attached (Mizushima Itsuro)
Accessories: none
Main specifications: zinc alloy diameter 70×H35mm 710g
Krypton outlet plate By tightening the 3-layer neo-fade carbon matrix material with a stainless steel frame, it is designed to have ideal damping characteristics without resonance/vibration. You can bring out the merits of high-resolution sound sources, etc. (Mizushima Itsuro)
Accessories: original box, screws
Main specifications: W70.4 x H114.4 x D4.0 mm approx. 50 g
It is an outlet cover with a stainless steel base, a beautiful finish made of carbon and glass fiber damping material, and a vibration suppression effect due to the hybrid structure (Mizushima Itsuro)
Accessories: original box, screws
Main specifications: Dimensions 71 x 116 mm, weight 71 g (actual measurement)
Since it is said that electrode resonance is attenuated and rectified by combining multiple different materials such as phosphor bronze, brass, aerospace-spec aluminum alloy, and natural smoky quartz as materials, it seems that the effect can be realized if you try it by attaching a clean power source to an outlet, etc. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Accessories: original box
Main specifications: diameter 37 mm, cover length 63 mm
TOWER RECORDS turntable mat set of 3 Usually it comes in a set of 2. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: original bag
A compact and easy-to-use Orthophone digital needle pressure gauge. The operability is also simple, and it is possible to easily adjust the needle pressure with high accuracy (Mizushima Itsuro)
Maintenance information: 2024.4.27 Operation confirmed
Accessories: instruction manual, original box
Main specifications: Equipped with auto power off function, measurement range 0.1 to 200 g (0.1 g units) W59 x H17 x D120 mm 68 g