A single-by-wire rocket series entry model with a 3.0 m pair of banana plugs at the end of the speaker cable. Divided into 4 conductor paths, the sound quality is more dynamic with a structure that suppresses malignant interactions that occur between the 2 conductors. Also, although it is composed of a semi-single-wire conductor arrangement, it has a highly flexible cable structure. There are abrasions etc. on the sheath (Kojima Yosuke)
Accessories: original box
Unused item! Power transformer primary: 90-100-110V secondary: 6.3V/3A x 2, 400-325-0-325-400V/230mA, 5V/3A W122 x H150 x D102 mm 5.4 kg (actual measurement) (Kojima Yosuke)
Accessories: none
Disposal price reduction. 2023/9/28 sales price 10,000 yen ※There is no problem with operation, but it is currently sold because it is cheap. Behringer's classic line mixer. Equipped with 16 inputs in a compact 1U housing, it can be used as a multi-purpose line mixer (Daiki Goto)
Maintenance information: 2023.9.28 Operation confirmed
Accessories: original box, instruction manual, power cable
Main specifications: W483 x H44.5 x D217 mm weight 2.3 kg
Inexpensive because it is in poor condition. 38cm enclosure. Originally, the ALTEC 604-8G was included. There are many scratches, cracks and peeling on the decorative plate, and there is screw licking*Shipping is estimated separately (Oikawa Tetsuji)
Main specifications: W660 x H1005 x D465 mm 35.1 kg
Maintained! A pre-main amplifier with Class A operation that allows you to enjoy sharp sound. The moderate amount of extrusion is comfortable, and this model is suitable for jazz and rock. The exterior has small scratches and dullness appropriate for the model year (Daiki Goto)
Maintenance information: 2024.1.22 maintained (balance volume (replacement) replacement, output relay replacement, input selector, reck-out, MM/MC switching, MONO, loudness, CD direct switch disassembly polishing grease application, solder repair, other volumes, switch cleaning, internal inspection and cleaning, operation confirmation.)
Accessories: copy of instruction manual
Main specifications: 100W+100W (8Ω) input 6 systems PHONO (MM/MC) quarter A amplification method using CD/PHONO direct switch W462 x H164 x D376 mm 14.3 kg
Power transformer primary: 100V secondary: 5V/3A, 2.5-6.3V/5.2 A x 2, 6.3V/3A, 360-400-450V/170mA W120 x H95 x D105 mm 5.3 kg (not including protrusions) There are abrasions and line scratches in places (Kojima Yosuke)
Accessories: none
The disposal price has been reduced. Member prices are not applicable. 2023/12/10 sales price 25,000 yen*Since the output terminal has been remodeled to an XLR terminal, it is inexpensive. It is a pretty niche product that uses 2 stereo amplifiers so that it can be used like a mono amplifier. Actually, it seems to be a product intended for use with the company's 405-2. There is a lot of dullness on the exterior due to aging (Fujisawa Yukishi)
Maintenance information: 2023.6.4 sound output confirmed
Accessories: none
Main specifications: W80xH47xD140mm approx. 1.0 kg/unit
The price has been reduced! 2017/3/16 sales price 15,000 yen A well-made record cabinet. Details such as the manufacturer are unknown. It is unclear what the phonomotor was mounted on. There are scratches and stains on the dust cover and cabinet on the exterior. (SEKINE Hisashi)
Accessories: No accessories
Main specifications: W550 x H170 x D445 mm hole diameter 20 mm 11.35 kg (actual measurement)
Undetailed, headshell similar to the exterior of the Technics SH-98D. It's a simple dish that seems to be easy to use (Oikawa Tetsuji)
Accessories: none
Main specifications: dead weight 7.3 g (actual measurement)
Pair tube Russian reprint model lot: 1609/1610 measured value 56/54 (rejected value 44) with original box*Pairs are judged based on gM values measured by testing machine TV-7 (Kojima Yosuke)
Accessories: original box
The price has been reduced. 2022/12/3 sales price 49,800 yen ※ It is cheap because the leather part is in a fairly poor condition with cracks, wrinkles, peeling seams, etc. Many audiophiles love this recliner. You can easily set the reclining position with adjustments under the left and right handrails. I definitely recommend it for relaxing listening to music at home. The leather color is black, and the base color is brown, giving it a relaxed atmosphere. Comes with an ottoman. The seat surface is also depressed due to deterioration (Murakoshi Yoichi)
Accessories: ottoman
Maintained! The mid-range α series uses an α-X balance circuit that blocks the effects of noise and distortion from the ground. The smooth, stretchy sound quality is attractive. Designed with CD playback in mind, the sound separation is good, and it is a classic premain that will keep you entertained regardless of genre. The exterior has rust spots, paint bald, etc. (Mizusaki Ryo)
Maintenance information: 2023.2.1 maintained (main amplifier output relay replacement, transistor and capacitor replacement, MM/MC, reckout switch disassembly, polishing grease application, solder main part repair, various volumes, switch cleaning, interior and exterior inspection cleaning, offset adjustment, operation inspection)
Accessories: copy of instruction manual
Main specifications: 90W+90W (8Ω) W448 x H160 x D441 mm 16.0 kg
The disposal price has been reduced. Member prices are not applicable. 2023/9/11 sale price 10,000 yen rare item! It appears to be a promotional product of YST-SW1000L. The YST-SW1000L can be displayed in a cool way (Oikawa Tetsuji)
Accessories: none
Main specifications: W660 x H20 x D600 mm weight 4.2 kg (actual measurement)
The price has been reduced. 2023/12/11 sales price 2,500 yen I think it's a shelf board for the company's rack GS-622. There is a scratch on the horn (Oikawa Tetsuji)
Accessories: fastener
Main specifications: W528 x H26 x D470 mm 4.3 kg (actual measurement)
2023.12.18Maintained professional cross 800Hz network. It is used in the 4320, etc., and the low frequencies are pushed out smoothly, giving the impression that the clarity of the mid-high range has improved. This network is useful for creating 2-way systems where woofers have a certain amount of area. How about making a 2-way horn system with a 16Ω unit? There are stains and rust on the main body. (TERAMOTO Hidehiko)
Maintenance information: 2023.12.18 Maintained (terminal rust removal treatment, cleaning, mounting screw replacement. SW type ATT contact cleaning. Frequency characteristics are measured and checked, and the original capacitors are continuously used for good results. (Check the input/output waveform and balance, check the sound output)
Main specifications: crossover frequency 800 Hz impedance 12 to 16 ohms W122 x H154 x D132 mm 1.9 kg/1 unit
A self-made large record player cabinet where Victor's TT-101 was mounted. SAEC's WE-308SX was mounted on the arm. Shipping costs will be estimated separately (Sasaki Shota)
Accessories: none
Main specifications: W630 x H205 x D570 mm, arm hole diameter 43/29 mm, weight 26.2 kg
Heavyweight stone base with a thickness of 65 mm and a weight of 63 kg! Mirror finish on the whole surface! It looks good as a base for analog players, power amplifiers, and racks. There is a chip in the corner. ※The trolley is not included. We will estimate the shipping fee separately (Fujisawa Yukishi)
Accessories: none
Main specifications: W650 x H65 x D550 mm, measured 63.1 kg
Disposal prices have been reduced! (Member price does not apply) 2023/11/7 sales price 79,800 yen ※ It's cheap because it's not in very good condition. Comes with an ottoman Among the company's many stress-free chairs, this is the most compact model and has a simple design that fits any room. It is firm and comfortable to sit on and supports your lower back. As for the exterior, the leather is worn out and has wrinkles and peeling. (MIURA Kimiya)
Accessories: ottoman
Main specifications: W700 x H940 x D700 mm, seat height 380 mm, ottoman: W550 x H400 x D420 mm
※This item is currently sold. Onkyo enabled speaker. It is a design that makes it possible to construct a Dolby Atmos sound field using sound reflection from the ceiling. Accessories such as brackets and cables are missing (Sasaki Shota)
Maintenance Information: 2023.12.11 Sweep Test Good
Accessories: none
Main specifications: sealed impedance 6 ohms, playback frequency band 90 Hz to 20 kHz, W120 x H155 x D153 mm, 1.2 kg
※Set of 2 (both tubes are not treated as a pair since their structures are very different), deflection output tubes, made in America, measured value 66/64 (rejection value 38), with original box (box lid is missing) *Measured values indicate GM values measured with the TV-7 testing machine (Kojima Yosuke)
Accessories: original box
Pair tube, 6L6GC compatible ball, high reliability tube, made in America lot: 8526/8526 measured value 44/42 (rejected value 25) with replacement box ※ pair is determined based on GM values measured with test machine TV-7 (Kojima Yosuke)
Accessories: replacement box
Pair tube, large beam output tube, 8147 compatible bulb, gray plate for Hi-Fi, with original box (outer box/inner box), has slightly decreased getter for both tubes ※ The pair measures and determines EM values with the measuring machine TC-162 (Kojima Yosuke)
Accessories: original box
Pair tube, EL84 compatible ball, pentode tube, made in Japan, measured value 84/80 (rejection value 50), both tubes have pin bends ※ pairs are determined based on GM values measured with test machine TV-7 (Kojima Yosuke)
Accessories: none
Pair tube 6BQ5 high reliability tube made in Japan measured value 72/68 (rejection value 46) *Pairs are determined based on GM values measured with the TV-7 test machine (Kojima Yosuke)
Accessories: none
Power cable 3.0 m A power cable that uses the company's KS-00 cable, uses an AET PSE-018V2HG as the outlet plug, and an AET PSE-320HG as the inlet plug. Compared to the predecessor, it is a monitor and high-resolution oriented model that has excellent high-frequency reproduction capability and resolution, and transmits sound images more clearly than ever before (Kojima Yosuke)
Accessories: none
Pair tube 6BQ5 compatible ball pentode tube measurement value 66/66 (rejection value 50) with original box SIEMENS print is printed, but it was determined from the structure and date code that it was made by Ei (made in Yugoslavia) ※The pair was determined based on GM values measured with the TV-7 testing machine (Kojima Yosuke)
Accessories: original box
1 bottle sold CV4085/6267 compatible ball mesh shield code: 8Y5 L2B measurement value 56 (rejection value 33) all the prints with the white box have disappeared, but it was determined to be EF86 based on the structure and code ※ The measured value shows the GM value measured with the test machine TV-7 (Kojima Yosuke)
Accessories: white box
Pair tube, EL34 compatible ball, Russian tube, measured value 44/42 (rejected value 30) with original box ※ pair is determined based on GM values measured with test machine TV-7 (Kojima Yosuke)
Accessories: original box
Pair tube, triode, metal base, made in America, with original box, the size of the glass tube is different on the left and right, but the internal structure is the same ※The pair is determined based on EM values measured with the SENCORE TC-162 test machine (Kojima Yosuke)
Accessories: white box
Pair tube, triode, metal base, made in America, comes with a box, is inexpensive because there are fewer gutters and there are burns ※Pairs are determined based on EM values measured with the SENCORE TC-162 test machine (Kojima Yosuke)
Accessories: white box
Pair tube, 6CA7 compatible ball, made in Russia, measured value 44/42 (rejection value 30) with original box ※ pair is determined based on GM values measured with test machine TV-7 (Kojima Yosuke)
Accessories: original box
※Set of 2 (not treated as a pair since the internal shape is different between the tubes) KT88 compatible balls, Russian metal brown, base code: 0210/0601 measured value 56/50 (rejection theory 44) with original box ※ measured values indicate GM values measured with the TV-7 testing machine (Kojima Yosuke)
Accessories: original box
1 bottle of side-heat beam tube, made in France, smoke measurement value 42 (rejection value 25), replacement box included, printing is missing ※ the measured value shows the GM value measured with the test machine TV-7 (Kojima Yosuke)
Accessories: replacement box
Pair tube 6BQ5 compatible ball pentode tube made in Russia, black plate, measured value 78/72 (rejection value 50) with original box ※ pair is determined based on GM values measured with test machine TV-7 (Kojima Yosuke)
Accessories: original box
2.6 m speaker cable sold per cable, 98 SCMC-OFC conductors, parallel multiple stranded wire type that uses 1 pair of strands, has relatively good treble range extension in the company's speaker cable lineup, and it is a cable that matches well with the overall softness of the sound (Kojima Yosuke)
Accessories: none
LGC conductors are used for only 1 3.0 m RCA cable. I want a little more loss of the high frequencies, but the sound is so intense that it comes forward (Mizusaki Ryo)
Maintenance information: 2023.11.24 Continuity confirmed
Accessories: none
USB Cable 0.5m SUM USB A/USB MiniB Type Silver Clad OFC High Purity Copper x Conductors, 6 Aluminum Diecast Connectors, 24 Gold Plated Terminals, Wide Base, Features Soft Sound, Rich Bass, and is Recommended for making classical music resonate loudly. There are scratches on the plug shell (Kojima Yosuke)
Accessories: none
Pair tube, 6BQ5 compatible ball, made in Yugoslavia, foot, measured value 70/70 (rejected value 50) with original box ※ pair is determined based on GM values measured with test machine TV-7 (Kojima Yosuke)
Accessories: original box
1 bottle of KT88 compatible ball, made in America, metal base, LUXMAN print measurement value 54 (rejection value 44), base with replacement box, has dullness ※ measured values indicate GM values measured with test machine TV-7 (Kojima Yosuke)
Accessories: replacement box
Unspecified board. A leather-style decorative sheet is attached to a wooden board (Tetsuji Oikawa)
Accessories: none
Main specifications: W530 x H25 x D430 mm, weight 3.4 kg (actual measurement)
The price has been reduced. 2023/9/22 Sales price 69,800 yen ※Since this is a remodeled product, it is currently sold. 3-way network. The details of the crossover are unknown. The attenuator comes with FOSTEX's AT-50H (16 ohms for the middle range only). There is a slight creak, but the sound output has been confirmed. I even took pictures of the interior. Please refer to it. There is no original terminal block (Sasaki Shota)
Maintenance information: 2023.9.22 sound output confirmed
Accessories: none
Main specifications: 3-way network W210 x H235 x D158 mm 4.5 kg (actual measurement)
Line matching transformer sold 1 piece Primary: 600 Ω Secondary: 600 Ω Winding Ratio 1:1 Output 10 dBm Frequency Range 50 to 10 kHz W34 x H42 x D22 mm Approx. 0.1 kg (Yosuke Kojima)
Accessories: none
Line matching transformer sold 1 piece Primary: 600 Ω - CT Secondary: 600 ohms Output 10 dBm Frequency Range 50 to 10 kHz W44 x H65 mm 0.25 kg/piece There are bumps and paint peeling in places (Yosuke Kojima)
Accessories: none
Pair tube 6SL7 equivalent tube military tube brown base ring getter measurement value 52 (rejected value 32) with original box ※The measured value shows the gm value measured with the test machine TV-7 (Kojima Yosuke)
Accessories: original box
* Since there are difficulties with the attachment part on both sides, it is inexpensive. Line matching transformer sold primary: 600 ohms, output 10 dBm, frequency range, 50 to 10 kHz, W44 x H65 mm, 0.25 kg/piece, the head of the mounting bolt on one side is flying off, and there is distortion in the screw hole on the other side (Kojima Yosuke)
Accessories: none
Output transformer sold 1 piece Primary: 14 kPPΩ Secondary: 600 Ω WW76 × H71 × D43 mm 0.6 kg (actual measurement, protrusions not included) There are paint peeling and seal marks in places (Kojima Yosuke)
Accessories: none
* It seems to be an output transformer from the specifications; sold 1 piece, primary: 10 kΩ, secondary: 600 ohms, W76 x H71 x D43 mm, 0.6 kg (actual measurement, not including protrusions), there is paint peeling in places (Kojima Yosuke)
Accessories: none