Unspecified board. A leather-style decorative sheet is attached to a wooden board (Tetsuji Oikawa)
Accessories: none
Main specifications: W530 x H25 x D430 mm, weight 3.4 kg (actual measurement)
The disposal price has been reduced. 2024/4/22 sales price 6,000 yen SOULNOTE spike base. How about the fans? There is a feeling of use (Daiki Goto)
Accessories: none
Main specifications: diameter 35 mm, height 7 mm, weight 47 g (actual measurement)
The disposal price has been reduced. Member prices are not applicable. 2024/4/22 sales price 6,000 yen SOULNOTE spike base. How about the fans? There is a feeling of use (Daiki Goto)
Accessories: none
Main specifications: diameter 35 mm, height 7 mm, weight 47 g (actual measurement)
Heavyweight stone base with a thickness of 65 mm and a weight of 63 kg! Mirror finish on the whole surface! It looks good as a base for analog players, power amplifiers, and racks. There is a chip in the corner. ※The trolley is not included. We will estimate the shipping fee separately (Fujisawa Yukishi)
Accessories: none
Main specifications: W650 x H65 x D550 mm, measured 63.1 kg
※Inexpensive because it is in poor condition. Self-made 2way/3way enclosure. The size of the hole is different at the top, with an opening diameter of about 315 mm on the top and about 360 mm on the bottom. There are many peeling veneer, corner pads, scratches, etc. (Oikawa Tetsuji)
Accessories: none
Main specifications: W450 x H1056 x D480 mm approx. 33 kg
The price has been reduced! 2023/10/7 This is a self-made MC step-up transformer with a sales price of 20,000 yen. According to the specifications, the boost ratio appears to be 1:10. Use it with high output cartridges such as the DL-103! (FUJISAWA KOSHI)
Maintenance information: 2023.10.7 operation confirmed
Accessories: none
Main specifications: MC boost transformer input/output 1 system boost ratio 1:10 W 110 x H45 x D145 mm (actual measurement)
Inexpensive because it is in poor condition. 38cm enclosure. Originally, the ALTEC 604-8G was included. There are many scratches, cracks and peeling on the decorative plate, and there is screw licking*Shipping is estimated separately (Oikawa Tetsuji)
Main specifications: W660 x H1005 x D465 mm 35.1 kg
The price has been reduced. 2018/3/3 selling price 10,000 yen Technics ring for fixing horns. Recommended for self-made people (Oikawa Tetsuji)
Accessories: none
Main specifications: Inner circumference diameter 95mm (actual measurement)
You can change the position of the steel rack and shelves with casters. There are many stains, scratches, and stains on the exterior (Takimoto Yutaka)
Accessories: none
Main specifications: W540 x H1355 x D680 mm 49.6 kg (actual measurement)
You can change the position of the steel rack and shelves with casters. There are many stains, scratches, and stains on the exterior (Takimoto Yutaka)
Accessories: none
Main specifications: W540 x H1355 x D680 mm 49.6 kg (actual measurement)
※There is no problem with operation, but it is currently sold because it is cheap. A subwoofer that can also be installed in a home theater or for those with insufficient bass in the system. The settings are simple, and you can create sound according to the speaker and room conditions. There are scratches, dirt, dullness, etc. (Oikawa Tetsuji)
Maintenance information: 2024.3.3 operation confirmed
Accessories: none
Main specifications: 1 way, 1 speaker, advanced YST system, floor type, anti-magnetic high-cut filter, 50-150 Hz, continuously variable dimensions, W235 x H485 x D409 mm, weight 14 kg
The disposal price has been reduced. Member prices are not applicable. 2023/9/11 sale price 10,000 yen rare item! It appears to be a promotional product of YST-SW1000L. The YST-SW1000L can be displayed in a cool way (Oikawa Tetsuji)
Accessories: none
Main specifications: W660 x H20 x D600 mm weight 4.2 kg (actual measurement)
※ Because it is cheap, it is currently sold. Switchable tone controller. You can adjust the low and mid high range tones according to the frequency characteristics of the system (Daiki Goto)
Maintenance information: 2024.5.7 operation confirmed
Accessories: instruction manual, power cable
Main specifications: variable frequency low range 30/60/120 Hz, medium and high frequency range 5K/10K/15 kHz
It smells like an air freshener, and since ATT has cracks, it is cheap, and is currently discontinued. A bookshelf type speaker that uses a uniquely developed hard dome unit. It is a speaker characterized by a well-balanced, clear, and bright sound. There are small scratches, dents, and net holes (Daiki Goto)
Maintenance information: 2024.3.12 operation confirmed (with ATT gaps)
Accessories: none
Main specifications: 3 way 3 speaker bass reflex system frequency band 30Hz to 30kHz impedance 6Ω sound pressure level 94 dB dimensions W390 x H710 x D350 mm weight 27.5 kg/book
※There are no operation confirmation issues, but since it is for business use, it will be handed over as is without warranty. It is an attractive amplifier with a maximum output of 100W during 4-channel operation, and the strength unique to commercial use. There is a feeling of use such as scratches and dullness on the exterior as a whole (Ryo Mizusaki)
Maintenance information: 2024.2.3 sound output confirmed
Accessories: none
Main specifications: 80 W x 4 (8 Ω continuous output) 100 W x 4 (4 Ω continuous output) 200 W (BTL 8 Ω continuous output) W480 x H88 x D417 mm weight 12.5 kg
※There are no operation confirmation issues, but since it is for business use, it will be handed over as is without warranty. Excellent heat dissipation performance due to the servo cooling system. It clearly brings out stable sound quality even when used continuously for a long period of time, and the sound source and pre are simply brought out. Overall, there is a feeling of use such as dirt and friction (Ryo Mizusaki)
Maintenance information: 2024.2.3 sound output confirmed
Accessories: none
Main specifications: 80 W+80 W (8 Ω continuous output) 110 W+110 W (4 Ω continuous output) 220 W (BTL 8 Ω continuous output) frequency characteristics 20 Hz to 20 kHz +0 -0.5 dB (at 4 Ω 1 W output) dimensions 480 x 102 x 394 mm
One-piece rectifier tube, fishing rod type filament made in China, incorporates the structure of the original WE274 and is well-built. Measurement value 56 (rejected value 40) with replacement box ※ The measured value shows the GM value measured with the test machine TV-7 (Kojima Yosuke)
Accessories: replacement box
Pair tube 45Special compatible spherical triode fishing rod type filament measurement value 100/92 (rejection value 55) *Pairs are judged based on GM values measured by test machine TV-7 (Kojima Yosuke)
Accessories: none
Pair tube 45 Special/38142 compatible ball, direct heat triode, fishing rod type, filament measurement value 120/118 (rejection value 55) with original box ※ The pair was determined based on the GM value measured by the testing machine TV-7 (Kojima Yosuke)
Accessories: original box
Pair Tube 45Special/38142 Compatible Ball Fishing Rod Type Filament Measurement Value 98/92 (Rejection Value 55) Geta Burns, is a bargain because it has decreased ※The pair is GM measured with the tester TV-7 Judgment is based on the value (Yosuke Kojima)
Accessories: none
The price has been drastically reduced. 2024/1/15 sales price 118,000 yen pair tube 45 special compatible ball straight heat triode fishing rod type filament made in America measurement value 90/86 (rejected value 55) with white box*Pairs are determined based on gM values measured by testing machine TV-7 (Kojima Yosuke)
Accessories: white box
Pair tube 45Special compatible spherical triode fishing rod filament measurement value 94/86 (rejection value 55) *Pairs are judged based on GM values measured by test machine TV-7 (Kojima Yosuke)
Accessories: none
Video digital cable, 1.0m, RCA terminal, SP-LGC conductor, entry model for the company's digital cable. There is a big difference in sound just by replacing it with a general-purpose digital cable (Kojima Yosuke)
Accessories: original box
Video digital cable, 1.0m, RCA terminal, SP-LGC conductor, entry model for the company's digital cable. There is a big difference in sound just by replacing it with a general-purpose digital cable (Kojima Yosuke)
Accessories: original box
2.6 m speaker cable sold per cable, 98 SCMC-OFC conductors, parallel multiple stranded wire type that uses 1 pair of strands, has relatively good treble range extension in the company's speaker cable lineup, and it is a cable that matches well with the overall softness of the sound (Kojima Yosuke)
Accessories: none
※ The stylus is a genuine SHURE VN35HE. The lock on the needle cover doesn't work, so it's cheap. Good needle tip! It combines the delicate expressive power unique to light needle pressure with an energetic, thick sound typical of Type 3. Recommended for those who listen to jazz and rock (Daiki Goto)
Maintenance information: 2024.4.10 operation confirmed
Accessories: none
Main specifications: mm type frequency range 10 Hz to 25,000 Hz output voltage 3.5 mV needle pressure 0.75 g to 1.25 g weight 6 g
The large triode print sold in Japan has disappeared, but I think it was made by NEC from the structure. Measured IP value: 45 mA (the best standard IP value for this amplifier is 50 mA) with the original box ※ I checked the sound output with the test amplifier and measured the plate current value, and it has been determined that the operation is good (Kojima Yosuke)
Accessories: original box
※Inexpensive because it is in slightly poor condition. Super tweeter with built-in network capable of playback up to 70kHz. You can select where to connect the high frequency range from 3 types of input. You can use it simply by placing it on top of a normal speaker and connecting it as is. The bright, clear high frequencies and carefree tone are the perfect match for JBL speakers. In addition to the exterior, there is a light float on the front baffle joint surface on one side, and a feeling of use such as dullness, abrasions, etc. can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.5.4 operation confirmed
Accessories: none
Main specifications: 25mm sintered carbon graphite dome tweeter playback frequency band FC to 70kHz crossover 12kHz/16kHz/22kHz impedance 5Ω sound pressure level 90dB dimensions W190 x H130 x D130 mm weight 1.3 kg
A network adapter that converts USB 3.0 to SFP (only compatible with 1 Gbps) SFP ports can be added to Windows PCs or laptops without wired LAN ports. There is a line scratch on the bottom. *SFP module and 5V power adapter are sold separately. (FUJISAWA KOSHI)
Accessories: original box
Key specs: https://www.oliospec.com/shop/shopdetail.html?brandcode=000000010613&search=USB-SFP&sort =
This is a high-resolution D/A converter. Dual monaural configuration, compatible with DSD 5.6 MHz and PCM192 kHz/32 bit USB inputs. You can easily enjoy the world of high-resolution audio from high-resolution sound source playback software installed on your computer. The output is equipped with an XLR balanced output in addition to the RCA output. Furthermore, these audio output levels can be selected from fixed, variable, and output off (Oikawa Tetsuji)
Maintenance information: 2024.5.3 operation confirmed (playback confirmed up to PCM192 kHz/DSD 5.6 MHz, COAX/OPT playback OK, each output playback confirmed)
Accessories: power cable
Main specifications: PCM data sampling frequency 32K, 44.1K, 48K, 88.2K, 96K, 176.4K, 192 kHz W215 × H61 × D238 mm 2.0 kg
Speaker cable 1.9 m pair end banana - basic cable composed of 4 unprocessed single-wire conductors. It's a straight, extruded, and comfortable sound. There is dullness around the plug (Kojima Yosuke)
Accessories: none
Genuine headshell included with Technics SL-1200mk7 etc. There is a slight chip in the screw hole (Mizushima Itsuro)
Maintenance information: 2024.4.27 continuity confirmed
Accessories: none
Main specifications: dead weight 8.7g