2022.9.10 This is the first 607 model that has undergone full maintenance, such as replacing capacitors, transistors, and SP terminals! It's one that makes you feel the intricacies unique to the heyday of audio. You can feel the strength of extrusion in the low range when playing LP records and the dynamic sense of dynamism with an intonation in the middle range, which is unique to the golden age of SANSUI. The exterior has dullness and small scratches. Serial 227050109 (Yonejima Satoshi)
Maintenance information: 2022.9.10 Maintained (electrolytic/tantalum capacitors, transistors, SP terminal replacement, RCA terminal polishing. Board cleaning and re-soldering. SW/VR disassembly and cleaning, application of grease to prevent oxidation and sulfation, replacement of tantalum capacitors, electrolytic capacitors, transistors, and heat dissipation sheets in the EQ/TONE section. Semi-fixed resistor, cement resistor, fuse resistor, fuse, relay replacement. Input waveform confirmation, load test (1kHz sine wave, 8Ω load: 65W+65W OK) sound output test)
Accessories: copy of instruction manual
Main specifications: 65W+65W (8Ω) W430 × H168 × D389 mm 15.3 kg
The top model of the premain amplifier launched by AccuPhase to commemorate its 40th anniversary. Uses AAVA volume. The power amplifier section with pure Class A operation is designed to be resistant to changes in the surrounding environment. An overwhelming amount of information filled with a sense of silence and scale. It's the ultimate premain with a high degree of perfection. The exterior has a feeling of use such as dullness. Serial 16X713 (Jun Tamai)
Maintenance information: 2024.5.30 sound output confirmed
Accessories: remote control instruction manual power cord
Main specifications: 30W+30W (8Ω), 60W+60W (4Ω) frequency characteristics 20Hz to 20kHz input terminals/balance (XLR) x 2 systems, unbalance (RCA) x 5 systems. Up to 2 option boards can be added to the rear panel W465 x H191 x D428 mm 24.7 kg
Maintained! This is a Dynaco tubular control amplifier. It is an amplifier where you can enjoy the warm and comfortable sound unique to vintage. While the microwave feel is moderate, the nostalgic sound with an emphasis on atmosphere has a unique, hard-to-get flavor. There is a feeling of use such as rust stains on the top and sides, and rust etc. on the knobs (Murakoshi Yoichi)
Maintenance information: 2024.5.29 maintenance (12AX7, 2000 μF electrolytic capacitor, 1 μF replacement, 1/4 W resistance added as a measure to improve switching noise, vacuum tube socket and RCA jack caulking repair, parts check including block capacitors, and operation check with AC 100 to 117 V)
Accessories: none
Main specifications: vacuum tube 12 AX7 x 4, 12 x 4 line input 5 systems phono 1 system (mm) 1 pre-out system W385 x H134 x D230 mm 7 kg
Maintained! For the first time in about 22 years, the musical Fidelity PREAMP3A has arrived. The circuit is based on a vacuum tube design, uses a low noise MOS-FET and uses a low NFB. The power supply unit has an external design, eliminates mutual interference with the audio circuit, and is particular about sound quality. The exterior is painted bald. Serial 03269 (Tamura Eiji)
Maintenance information: 2024.5.30 Maintained (poor contact with each SW/VOL, poor RCA contact → cleaning (chips cannot be removed) C deterioration replacement in the board, internal shaft, etc., rust/sticking → cleaning. Operation check OK.)
Accessories: none
Main specifications: W408 x H60 x D249 mm weight 5.5 kg
Fine gold series with 2.0m pair of RCA cables made of 99.997% OFC material. This is an entry-class, easy-to-use cable. The exterior is dull and has a feeling of use (Murakoshi Yoichi)
Maintenance information: 2024.5.29 continuity confirmed
Accessories: none
※1 bottle only. The RCA cable uses a 0.6 m 6N-7N hybrid conductor and twin core structure. The cable is thick and powerful in the mid-range, making it a great cable for vintage audio. There is slight dullness on the plug part (Murakoshi Yoichi)
Maintenance information: 2023.7.20 Continuity confirmed
Accessories: none
The disposal price has been reduced. Member discounts are not applicable. 2024/4/2 sales price 448,000 yen This is a late C20 model that underwent full maintenance from the 2023/12 condenser to main VOL replacement. Among Mackin's control amplifiers, this is a popular gem with a particularly rich, glossy tone. Not only jazz, but also the vocal sounds are excellent. The unique, rich, and highly artistic tone shows a particularly good compatibility with vintage speakers. Exterior, front panel characters disappear a lot, dullness, small scratches, abrasions, etc., and there is a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.2 maintenance completed (1/2 W resistor replacement and 3 noise countermeasures replaced) 2023.12.19 maintenance (vacuum tube 6X4, block capacitor, electrolytic capacitor, film capacitor, oil capacitor, resistor, main volume replacement. Gang error correction resistance 1/2 W added, switching noise reduction resistance 1/4 W added. RCA jack and vacuum tube socket caulk repair, operation check.)
Accessories: none
Main specifications: tubular phono 2 system phono equalizer curve variable use vacuum tube ECC83 x 5 ECC82 x 2 EZ90 x 1 W440 x H165 x D316 mm 8.7 kg
Maintenance has been carried out and deteriorated capacitors etc. have been replaced! A newly created power supply is included. Genuine RF MC cartridge head amplifier The RCA terminal specification makes it easy to use, and has a separate power supply structure. The delicate, clear, and powerful sound is attractive (Daiki Goto)
Maintenance information: 2023.6.24 maintained (new power supply manufactured because the power module is defective but cannot be repaired, all deteriorated capacitors replaced, pin jack deterioration replaced, gain changeover switch replaced due to poor contact, each gain readjusted, operation inspected, (there are no current problems with the module)
Accessories: copy of instruction manual
Main specifications: Gain can be adjusted in 3 levels; input impedance can be used up to 45 ohms W175 x H60 x D210 mm 1.4 kg
The disposal price has been reduced (member prices are not applicable). 2024/2/16 sales price 378,000 yen ※The power supply part has been newly created. Other internally deteriorated parts have been restored! 2-way 100Hz specification An electric crossover coveted by Mark Levinson fans. You can see how well the early Levinson was built can be seen from the feel of the knobs that seem to make you addicted. You can listen closely to Levinson's unique sounds even on Divider. The exterior has scratches on the front top plate and other threads (Mizusaki Ryo)
Maintenance information: 2024.2.16 Maintained (*Since there is no power source, new power supply and connection cable were manufactured, noise appears in the LChLow output, transistor defects in the low pass module were replaced, re-encapsulated, readjusted due to left and right level differences, 4 volume contacts were cleaned, specs were inspected, and blocking characteristics were inspected. The crossover is 100Hz)
Accessories: Power supply unit (newly created, non-genuine), power cable, copy of instruction manual
Main specifications: 2 way (100 Hz specification) closed module type RCA Remo input/output size (main unit) W483 x H51 x D156 mm 2.8 kg size (power supply part) W101 x H101 x D256 mm 2.2 kg
The price has been reduced! 2024/5/27 sales price 108,000 yen This is a TEAC headphone amplifier with a built-in USB DAC that condenses high-spec functions compatible with high-resolution sound sources in an A4 size compact size. The D/A converter section is equipped with Asahi Kasei Electronics' flagship model VERITA AK4497 based on 1 left and right. It is packed with various functions such as wireless playback, analog input, and external clock input. There are no noticeable scratches and it is in good condition. Serial 20Z0002 (Tomonori Asaine)
Maintenance information: 2024.5.26 Operation confirmed
Accessories: Remote control power cord (general purpose)
Main specifications: USB input 16 to 32 bit, 44.1 kHz to 768 kHz, DSD2.8 m to 22.5 MHz coaxial, optical digital input 16/24 bit, 32k to 192 kHz, DSD2.8 MHz (compatible with 176.4 kHz/24 bit DOP transmission) Inputs: USB B2.0, RCA, coaxial, optical x 2, coaxial 3.5mm mini, Bluetooth output: RCA, XLR, 6.3 mm standard x 2, 4.4 mm 5 poles Pentaconn W290×H84.5×D248.7mm 4.2 kg
The disposal price has been reduced! (Member discounts are not applicable) 2024/3/29 sales price 138,000 yen Sneaky DSM with built-in network player function and 2ch amplifier has arrived. It has a smart design that eliminates anything superfluous, and can be operated with an iPod or the like. Of course, it also has an excellent external input function. There are some minor scratches on the exterior. Genuine Rin Japan. Serial 1333455 (Tomonori Asaine)
Maintenance information: 2024.3.29 Operation confirmed
Accessories: Speakon remote control power cable setup manual
Main specifications: analog input: RCA1 system digital input: coaxial, 1 optical system, 3 HDMI output, 1 HDMI system*RCA has variable output and fixed output can be changed by setting Compatible files: FLAC, WAV, Apple Lossless, AIFF, MP3, WMA, AAC, OGG Compatible Bits: 16 to 24 bits 33W ✕ 4ch (4Ω) W350 ✕ H54.5 ✕ D215mm Weight 2.3 kg
*Currently sold. The output has been changed to an RCA terminal. The entire frame has a wooden frame, back panel, and self-made cable processing, and the output has been changed to an RCA female terminal, making it detachable. Internal changes are unknown. We will sell it as is. In addition to the exterior, as described above, a feeling of use can be seen, such as dullness, scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.21 Operation confirmed
Accessories: RCA cable
Main specifications: W77 x H64 x D115 mm approx. 414 g (cable not included)
Maintained! A model equipped with a variable switching phono, an RF official imported product. This is a high-end preamp that made the CELLO name known. It is no exaggeration to say that the elegant and beautiful tone, which is precise and delicate, has outstanding expressiveness and unique luster, is a work of art. A wood case is included, but the mounting screws are missing. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.29 maintenance completed (power supply unit and main body capacitor replacement, volume dismantling and cleaning, pin jack correction, specification inspection, various operation inspections)
Accessories: power cord, connection cord, original box, wood case
Main specifications: input imbalance (RCA) 8 systems/PHONO (MM/MC) 1 system/balance (Fisher) 1 system output unbalance (RCA) 2 system/balance (Fisher) 1 system body/W515 x H140 x D370 mm weight 10.1 kg power supply/W240 x H100 x D335 mm weight 5.1 kg
YBA's high-precision line preamps equipped with independent left and right volumes are in stock for the first time at Hi-Fi! In addition to the supple and glossy tone unique to YBA, you can also feel the high level of separation, it is authentic. A CP machine with a high level of satisfaction over the price. The exterior is dull and has small scratches on the top plate. Serial P21900L (Yonejima Satoshi)
Maintenance information: 2024.5.28 Operation confirmed
Accessories: instruction manual, power cord
Main specifications: input: LINE/5 systems (RCA), output impedance: 20 ohms, output terminals: 2 systems (RCA) W430 x H83 x D330 mm, 5 kg
An attractive CD player with a smart design and stable playback ability while being inexpensive. You can enjoy music without getting tired with a smooth, bright tone. The exterior is generally dull and has small scratches. Serial C72PJ1136 (Yonejima Satoshi)
Maintenance information: 2024.5.28 Operation confirmed
Accessories: power cable
Main specifications: digital output/coaxial 1, optical 1 analog output/1 system W430 × H85 × D290 mm 4.4 kg
Maintained in 2023. After all, the warm, and glossy sound quality is excellent for stringed instruments. It has a soft and vivid sound not found in transistors, making it perfect for listening for long periods of time. In addition to noticeable scuffs and paint peeling on the exterior and transformer area, dullness and a feeling of use can be seen. Serial F0800283 (Murakoshi Yoichi)
Maintenance information: 2023.7.23 maintained (vacuum tube socket block capacitor electrolytic capacitor oil capacitor SP and RCA terminal semi-fixed VR fuse holder replacement load test (8Ω load 1kHz 25W+25W) input/output waveform confirmation sound output check performed gain VOL NFB switching SW disassembly contact refinement to prevent oxidation and sulfation grease coating input/output waveform confirmation distortion load test (1 kHz (25W+25W at sine wave 8Ω load) sound output test)
Accessories: copy of instruction manual
Main specifications: 50CA10 push-pull output 30W+30W W410 x H183 x H160 mm 13.8 kg
The disposal price has been reduced! (Member discounts are not applicable) 2024/5/15 sales price 128,000 yen LINN network audio player with an integrated amplifier. The built-in amplifier makes it easy to use, and you can easily enjoy network audio. It sounds soft and natural, and is perfect for those who want to enjoy music casually. As for the exterior, there are threads and dullness on the top plate. Serial 1234701 (Yonejima Satoshi)
Maintenance information: 2024.5.15 Operation confirmed
Accessories: remote control, power cord
Main specifications: Compatible audio files FLAC, ALAC, WAV, AIFF, AAC, MP3 compatible sampling frequencies 7.35k, 8k, 11.025k, 12k, 14.7k, 16k, 22.05k, 24k, 29.4k, 32k, 44.1k, 48k, 88.2k, 96k176.4k, 192 k compatible bits 16 - 24 bit input terminal Ethernet analog audio RCA x 3 front AUX x 1 MM Phono digital audio coaxial RCA (SPDIF) x 3 TOSLINK (Optical) x 3 output terminal SP terminal 100W+100W W381 x H80 x D355 mm weight 5.0 kg
The RCA cable uses 102 SSC as the 1.0 m pair conductor and polymer polyolefin as the insulator. This is Oyaide's proud work, which is particular about precision processing. I am overwhelmed by how clear the sound quality surpasses the previous model. (FUJISAWA KOSHI)
Maintenance information: 2024.5.23 continuity confirmed
Accessories: No accessories
The price has been reduced! 2024/5/25 sales price 598,000 yen Mark Levinson's current premain amplifier. It is composed of Mark Levinson's traditional full discrete, direct coupling, dual mono class A circuit preamp section and Class AB amplification, and a power section equipped with a large capacity power transformer and a large capacity capacitor. In addition to analog disc (MM/MC), high-resolution, and streaming playback, it also has an aptXHD compatible Bluetooth connection function. The exterior is generally good, but there is a slight scratch on the side (Tomonori Asaine)
Maintenance information: 2024.5.25 Operation confirmed
Accessories: remote control instruction manual power cable
Main specifications: output 125 W+125 W (8 ohms) frequency response 2 Hz to 20 kHz input balance (XLR) x 1, line (RCA) x 2, phono MC x 1, MM x 1, optical x 2, coaxial x 1, USB 2.0-B x 1 Bluetooth connection compatible digital format linear PCM 32 to 384 kHz/32 bit, DSD 64 to 256 (2.8 to 11.2 MHz) digital processing MQA decoding, 7 PCM digital filters, upsampling to 352.8 kHz and 384 kHz, 4 DSD digital filters selectable W438 × H145 × D507 mm 28.1 kg
The price has been reduced! 2024/5/26 sales price 138,000 yen A phono equalizer amplifier with a dual monaural fully balanced input/output circuit configuration compatible with MC cartridge balance input. The accurate RIAA phono equalizer pursues how close it is to the original sound before it is engraved on the board. In addition to the high-accuracy RIAA correction circuit, it is also compatible with DECCA and COLUMBIA EQ curves. Also, in addition to the load resistance of MC cartridges, it is also equipped with load capacity switching for MM cartridges, and settings can be made according to records and cartridges. Serial 2260031 (Tomonori Asaine)
Maintenance information: 2024.5.26 Operation confirmed
Accessories: instruction manual power cable (general-purpose product)
Main specifications: unbalanced input/RCA terminal (MC/MM combined use) x 1 system/input impedance/mm47kΩ, load capacity 0, 100, 220, 330pF MC/10, 22, 47, 100, 220, 470, 1 kΩ balanced input/XLR terminal (MC only) x 1 system/MC/10, 22, 47, 100, 220, 470, 1 kΩ W290 x H84.5 x D252.5 mm 4.5 kg
The disposal price has been reduced! (Member discounts are not applicable) 2024/5/15 sales price 128,000 yen LINN network audio player with an integrated amplifier. The built-in amplifier makes it easy to use, and you can easily enjoy network audio. It sounds soft and natural, and is perfect for those who want to enjoy music casually. As for the exterior, there are threads and dullness on the top plate. Serial 1220444 (Yonejima Satoshi)
Maintenance information: 2024.5.15 Operation confirmed
Accessories: remote control, power cord
Main specifications: Compatible audio files FLAC, ALAC, WAV, AIFF, AAC, MP3 compatible sampling frequencies 7.35k, 8k, 11.025k, 12k, 14.7k, 16k, 22.05k, 24k, 29.4k, 32k, 44.1k, 48k, 88.2k, 96k176.4k, 192 k compatible bits 16 - 24 bit input terminal Ethernet analog audio RCA x 3 front AUX x 1 MM Phono digital audio coaxial RCA (SPDIF) x 3 TOSLINK (Optical) x 3 output terminal SP terminal 100W+100W W381 x H80 x D355 mm weight 5.0 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/5/16 sales price 598,000 yen The version has been upgraded from DS/K1 to K3. A model equipped with KATALIST that has adopted a new clock architecture. Similar to the higher-level model KLIMAX DS/3, DSD can now also be played natively, and the range of playback has greatly expanded. It is a degree of perfection that is close to the height of the KLIMAX DS, such as improvements in power supply to the DAC and processor sections by examining the circuit layout. There is a line scratch on the display (Murakoshi Yoichi)
Maintenance information: 2024.5.15 sound output confirmed
Accessories: instruction manual, original box
Main specifications: Playback formats: DSF, DFF, FLAC, WAV, ALAC, AIFF, AAC, MP3, WMA, VORBIS (same as DS and other models) Compatible resolution: 7.35-192 kHz, 16-24 bit (similar to DS and other models) DSD64 (2.8224 MHz) /DSD128 (5.6448 MHz) compatible analog audio output: XLR balanced, RCA unbalanced (fixed/variable output) Digital audio output: 75Ω, BNC, 1 line, EXAKT LINK2 system, W380 x D380 x H91 mm, 5.6 kg
This is a 5th generation digital voicing equalizer equipped with independent sound field correction and equalizer functions. Various connections are possible with various digital/analog input/output, including the company's unique HS-LINK. You can freely control the sound field and tone according to the environment. The exterior is also good with no particularly noticeable scratches. Serial C3Y418 (Tomonori Asaine)
Maintenance information: 2024.5.26 Operation confirmed
Accessories: Remote control instruction manual, power cord, connection cord, microphone stand, microphone cable, cross, original box
Main specifications: digital input (HS-LINK x 1 COAXIAL x 1 OPTICAL x 1) digital output (HS-LINK x 1 COAXIAL x 1 OPTICAL x 1) analog input (RCA x 1 XLR x 1) analog output (RCA x 1 XLR x 1) USB terminal USB 2.0/3.0 (up to 128 GB) ※ USB memory connection W465 x H161 x D396 mm weight 14.9 kg
*Currently sold. The output has been changed to an RCA female terminal. FR MC boost transformer using a toroidal core. Create a natural sound that makes it easy to understand the characteristics of cartridges. In addition to switching the impedance of 10 to 30 ohms, there is also a bypass position, so it is compatible with various cartridges without taking up much space. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.21 Operation confirmed
Accessories: copy of instruction manual, connection cable
Main specifications: impedance 10 ohm/30 ohm/PASS playback frequency band 20 Hz to 30 kHz W64 x H64 x D105 mm approx. 455 g
Digital sound repair machine. By predicting an ultra-high frequency range of 20 kHz or more and outputting it in addition to the original sound, it feels smooth, and the sound quality changes to very comfortable to listen to. There are no conspicuous scratches*Additional terminals have been added, but they cannot be used for both input and output (Sasaki Shota)
Maintenance information: 2024.5.26 Operation confirmed ※Additional terminals cannot be used for both input/output
Accessories: none
Main specifications: 1 RCA input/RCA output each, 5 stage effect switching size W132 x H71 x 334 mm weight 960 g
Carefully maintained, including replacing glass panels with new ones! An original C22, a famous machine admired by enthusiasts. The thick, soft, and strongly extruded tone is a pleasant tone that can only be experienced with an old McKinn. It has a rich tone centered around the middle range with a high concentration, and it sounds with plenty of realism. The legs are alternative rubber feet (adhesive). You can see a feeling of use such as appearance, dullness, small scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.25 maintained (vacuum tube cover, replacement, front panel replacement, 0.01 μF, etc., replacement, 6 electrolytic capacitors, 40 μF replacement, resistance, 1 W and 1/2 W replacement, 8 switching noise improvement measures, 1/4 W, 6 additional resistors, vacuum tube socket and RCA jack, re-caulking repair, etc. Operation checked with AC 100 to 117 V (if you are concerned about sound leakage when volume is minimal, on the top Please narrow down OUT LEVEL))
Accessories: copy of instruction manual
Main specifications: 117 V specification, 4 input systems, 2 phono systems, frequency characteristics, 20 Hz to 20 kHz (± 0.5 dB), signal-to-noise ratio, 85 dB (high level), 62.5 dB (low level), distortion ratio 0.2%, W406 x H138 x D330 mm, 7.3 kg
※The output has been changed to an RCA terminal. 15th anniversary limited edition model of the famous DL-103 cartridge. It is a step-up transformer that was sold as a set as the DL-103 T2 at the time, and it has a solid framework and a thick sound. In addition to the exterior, as described above, you can see a feeling of use such as dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5,21 operation confirmed
Accessories: Connection cable (external product)
Main specifications: frequency band 20 Hz to 70 kHz 40 ohms crosstalk 60 dB or more W92 x H55 x D145 mm 720g
Maintained! Grad's rare wooden tonearm, which received rave reviews in stereo sound magazines, is now in stock. The beautiful curves and sleek design of the gunstock type walnut are excellent, and it is an arm that is the cornerstone of the Fifty's Sound. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.25 maintenance completed (arm side lead wire shell terminal solder repair output terminal 5P connector RCA terminal replacement cartridge installation simple check conductivity check)
Accessories: none
Main specifications: Dynamic balance type 0.5 kg (actual measurement)
RCA cable 1.0m pair, the company's flagship cable PCUHD/6N high-purity copper wire/silver-plated copper wire/HiFC composite conductor is dull around the plug, and the L/R coloring is slightly peeled off (Kojima Yosuke)
Accessories: original box
This is an entry model that uses a 1.0 m pair of RCA cables with a symmetrical coax structure. The exterior is dull and has a feeling of use (Hiroki Aso)
Maintenance information: 2024.5.20 continuity confirmed
Accessories: none
Full maintenance from capacitor replacement to re-soldering of each board, etc.! The first memorable luxury model in the Sansui 07 series in the era when there was no 907. Starting with the newly developed dual FET at the time, the company's consistent commitment to adopting quadruple detent volumes and large electric power transformers independently on the left and right has already been established. Compared to models from the 80s and 90s, the sense of fulfillment in the phono section is amazing. There is a feeling of use due to appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.4.16 Maintained (capacitor, semi-fixed resistor, transistor, resistor, protection relay SP terminal, heat dissipation sheet replacement. SW type terminal cleaning, contact grease coating. Re-solder flux cleaning for each board. Each circuit adjustment, RCA terminals, interior and exterior cleaning. (Various tests)
Accessories: copy of instruction manual
Main specifications: 85W+85W W430 x H168 x D389 mm 16.8 kg
Maintenance has been completed, such as replacing capacitors and replacing deteriorated parts! It is a famous machine with a velvet transformer, and you can enjoy rich sound with stable operation. The fresh, glossy tone in the mid-high range has a different appeal from the MC275. The exterior has a feeling of use over time, such as dullness and small scratches (Hiroki Aso)
Maintenance information: 2024.5.19 Maintained (volume curing improvement treatment for TWIN, 2W oil capacitor replaced with 0.01μF, 3W oil capacitor replaced with 0.5 μF, missing thermistor, replacement, 250μF, domestic CE replacement, block capacitor 100/30 μF defective replacement, oil capacitor 0.22 μF defective replacement electrolytic capacitor 20μF, etc. Deterioration replacement resistor 2W deterioration replacement Vacuum tube socket and RCA jack caulking repairs ※ Other operation checks have been performed (measured at 41 to 58 W with rated output AC 100 to 117 V, SP: 8 Ω) ※ The power transformer groans a little, but there is no problem with performance)
Accessories: A copy of the English instruction manual
Main specifications: 40W+40W 6L6GCPP vacuum tube 6L6GC × 4 12AX7 × 3 12AU7x2 12BH7 × 2 frequency characteristics 16 to 40,000 Hz dimensions W400 × D265 × H195 mm weight 25 kg
Fully maintained! The main part of the SQ38F is an independent power amplifier, the famous MQ60. The natural, smooth sound quality with a high sense of transparency is attractive. You can relax and enjoy classical music and vocals in a natural way. The deep sound quality that cannot be expressed with the latest vacuum tube amplifiers is exceptional. The exterior has dullness, small scratches, and paint peeling. Serial 473753 (Hiroki Aso)
Maintenance information: 2024.5.19 maintained (vacuum tube socket block capacitor electrolytic capacitor oil capacitor SP and RCA terminal semi-fixed VR fuse holder replacement load test (8Ω load 1kHz 30W/30W) input/output waveform confirmation sound output check performed impedance switching SW gain VOL disassembly contact refinement oxidation and sulfidation prevention grease coating input/output waveform confirmation load test (1 kHz) (Sine wave at 8Ω load: 30W+30W) sound output test)
Accessories: copy of instruction manual
Main specifications: output 30W+30W dimensions W410 x H160 x D205 mm weight 13.8 kg
RCA cable 1.0m pair oxygen-free copper OFC Ritz wire 2-core shield plug, standard AccuPhase line cable with gold plating. The sound is more gorgeous than the L-10. There are dullness and scratches around the plug, and abrasions on the sheath (Kojima Yosuke)
Accessories: none
A compact, high CP, and easy headphone amplifier. The sound is bright and has good visibility. A well-balanced model that works well with everything from pop to rock. Serial 32741 (Fujisawa Yukishi)
Maintenance information: 2024.5.18 Operation confirmed
Accessories: instruction manual, AC adapter
Main specifications: output 330 mw/30 ohm, 60 mw/300 ohm headphone amplifier connection, 30 ohm gain, 11 dB S/N ratio, 87 dB frequency characteristics, 30 to 20 kHz, input/output RCA, 1 system each, W103 x D127 x H38 mm, 1.40 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/4/23 sales price 99,800 yen, genuine Rin Japan product. A network audio player. It has a simple and modern European design, so you can enjoy a bright sound without getting tired of listening. Not only is it compatible with the LINN system, but it is also equipped with digital output and variable line level output functions not found in the KLIMAX DS and AKURATE DS. There is a thin scratch on the top plate. ※The display is slightly dark, but this is the current situation. Serial 1255165 (Fujisawa Yukishi)
Maintenance information: 2024.4.23 Operation confirmed (Ver. 4.104.518)
Accessories: remote control, power cord
Main specifications: Compatible sampling frequencies 44.1K, 48K, 88.2K, 96K, 176.4K, 192K compatible bits 16-24 bits, output terminals RCA phono (fixed/variable line level output), RCA phono coaxial (digital output) W381 x D360 x H80 mm 4 kg
The flagship model of the Macintosh power amplifier with a silver panel. It is characterized by its rich sound. The extrusion is strong and goes great with JBL large monitor speakers. The dynamism in the mid to low range, which is difficult to obtain with current Mackin power amplifiers, is attractive. There are scratches, dullness, and discoloration in places (Kojima Yosuke)
Maintenance information: Maintained on 2020.8.26 (2 input volumes, 4 semi-fixed volumes, 2 RCA plugs, 12 lamps, 8 electrolytic capacitors, replacement input mode switch disassembly cleaning, card edge cleaning, soldering, bias and offset check, output sound check)
(*The interior and exterior have been cleaned.)
Accessories: power cable
Main specifications: 500W+500W (1000W when mono) equipped with power guard circuit W483 x D465 x H263 mm 60.3 kg
There is a slight gap in volume, but it will be sold as is. The mid-range is thick and powerful, and it is characterized by analog-like sound quality with a moderate sense of range. It effectively gently relaxes hard sound CD players. The characters on the panel display are slightly off, and the 48khz lamp is misaligned in the back (Takasaki Atsushi)
Maintenance information: 2024.5.17 Operation confirmed
Accessories: copy of the manual
Main specifications: 96 kHz.24 bit upconverter built-in DA converter input compatible 32, 44.1, 48, 64, 88.2, 96kHz digital input 3 systems (BNC, optical/XLR, coaxial/coaxial) analog output 1 system (RCA) W225 x H45 x D195 mm 1.12 g
The disposal price has been reduced. Member prices are not applicable. 2024/5/6 sales price 998,000 yen*The front panel is 20.6L, but it is an upgraded product starting at 20. Maintained! Genuine Harman product. The excellent separation unique to mono and the excellent sense of shading of the sound give off a unique difference, and even large aperture woofers drive well. Also, the slightly sweet, and comfortable sound similar to ML-2L is attractive. It still makes music fans groan. There are scratches and small scratches on the exterior. Serial 666/665 (Sasaki Shota)
Maintenance information: 2024.4.15 Maintained (1 deteriorated transistor has been replaced. Other inspections and adjustments have been made) 2023.7.20 maintained (connector contact between the heat sink board and main board has been corrected. Tr, capacitor and resistor exchange. Part of the board solder is re-soldered. Attach the Fisher plug to the SP cable. (Other inspections and adjustments)
Accessories: copy of instruction manual, power cable, Fisher to SP cable, Remo pin x 2, balance short pin
Main specifications: mono power amplifier effective output 100W (8Ω) input/unbalance (RCA) 1 system, balance (XLR) 1 system, 1 SP terminal system W483 ✕ H210 ✕ D560 mm weight 33 kg/unit
The disposal price has been reduced. Member prices are not applicable. 2024/4/11 sales price 118,000 yen ※It's cheap because it doesn't have a hood. Maintained! Vacuum tube stereo power amplifier. The bright and fresh sound typical of DYNACO is attractive. This is an amplifier I want to play in combination with JBL, Altec, etc. The grill is missing, and there is a feeling of use due to aging (Daiki Goto)
Maintenance Information: 2024.4.11 Maintained (· Block Capacitor 30/20/20 μF Defect Replacement · Stereo/Mono Switch Defect Replacement · Shock Noise Improvement Measures → Spark Killer Addition · Vacuum Tube 7199 Noise Exchange · Mylar Capacitor 390pF Deterioration Replacement 2 · Resistors 1/2 W Deterioration Replacement · BIAS Readjustment · Vacuum Tube Socket and RCA Jack Caulking Repair. *Other operation checks have been performed (measured at 32 to 41 W SP: 8 Ω at rated output AC 100 to 117 V)
Accessories: instruction manual
Main specifications: rated output 35W+35W vacuum tube EL34 x 4 7199 x 2 GZ-34 x 1 W330 x H165 x D240 mm 12.5 kg
This is a high quality line cord that takes advantage of the characteristics of 4266, a 1.0m pair of RCA cables with a four-core shield structure (Tamura Eiji)
Maintenance information: 2024.5.15 continuity confirmed
Accessories: No accessories
The A3500 vacuum tube power amplifier has been refreshed by thorough maintenance down to the smallest details, such as volume disassembly and polishing. The warm, fresh tone, filled with the appeal of a vacuum tube type, is still appealing enough today. You can enjoy music with a rich, thick tone that contrasts with the clicking tones of recent vacuum tube amplifiers. As for the exterior, paint deterioration and peeling can be seen on the transformer on one side, and there is a feeling of use such as dullness, small scratches, etc., and there is a dent in the hood. ※3-pole tube connection specification. 20W+20W (actual measurement) is output as specified by the manufacturer (Takasaki Atsushi)
Maintenance information: 2023.2.3 maintained (main tube (6CA7) replacement vacuum tube socket, block capacitor, electrolytic capacitor, oil capacitor, SP and RCA terminals, complete disassembly of semi-fixed VR replacement power input gain volume, contact polishing, anti-oxidation/sulfation grease coating load test (8Ω load 1kHz 20W+20W) input/output waveform confirmation sound output check performed)
Accessories: copy of the manual
Main specifications: 20W+20W (8Ω) vacuum tube 6CA7×4/6AQ8×3 W465×H168×D206mm 16kg
RCA cable, 1.0 m pair, 6N ultra-pure copper and 70 specially twisted hybrid structured conductors with OFC copper, an R resonator is attached as a damping function based on a new concept, and the plug is an original collect chuck. It's a natural, highly transparent sound quality with few habits typical of SAEC. There are scratches around the plug (Kojima Yosuke)
Accessories: none