※Only 1 output transformer push-pull output 10W primary: 8 kΩ secondary:: 4-8-16 ohms
W75 x H98 x D78 mm 1.54 kg (actual measurement, not including protrusions) There are abrasions and paint peeling (Kojima Yosuke)
Accessories: none
Line matching transparent pair sales primary side: 600 ohm CT (150 split) secondary side: 20 kωCT (5k split) W77 x H71 x D43 mm 0.54 kg/piece (actual measurement, not including protrusions) One side with the original box seems to be an unused item from the state of the terminal! (Kojima Yosuke)
Accessories: original box
Power transformer primary: 85-100-110V secondary: 5V/3A 6.3V-CT/3A 6.3V/3A 2.5V-CT/6A 380-0-280-380V/DC120mA W108 × H74 × D94 mm 3.2 kg (actual measurement, not including protrusions) There are abrasions and paint peeling (Kojima Yosuke)
Accessories: none
Power transformer silver hammer tone primary: 100V secondary: 6.3-5 V/2A x 3 280-240-200-0-200-240-280V/DC0.1 A W92 x H68 x D78 mm approx. 2 kg/piece (measured not including protrusions) (Kojima Yosuke)
Accessories: none
Vacuum tube socket pair sold A small UV socket with the same rotating-fixed mechanism as the 845 and 211 sockets. Can be used for 300B, 2A3, etc. Comes with fixing screws (Yosuke Kojima)
Accessories: fixing screws
* Some terminals are missing, and there is a lot of repainting and paint peeling, so it's inexpensive. Power transformer primary: 100V secondary: 530-400-250-0-250-400-530V/0.15A 5V/3A x 2 6.3 V/3A 7.5 V/4.5 A x 2 W120 x D113 x H120 mm (max) 5.24 kg (Kojima Yosuke)
Accessories: none
It seems to be a set of 2 choke transformers, but the details are unknown. W31H95 x 44 mm 0.32 kg/piece (actual measurement, protrusions not included) Only conduction by the tester has been confirmed (Kojima Yosuke)
Accessories: none
It seems to be a set of 2 choke transformers, but the details are unknown. W31H95 x 44 mm 0.32 kg/piece (actual measurement, protrusions not included) Only conduction by the tester has been confirmed (Kojima Yosuke)
Accessories: none
Power transformer silver hammer tone primary: 100V secondary: 6.3-5 V/2A x 3 280-240-200-0-200-240-280V/DC0.1 A W92 x H68 x D78 mm approx. 2 kg/piece (measured not including protrusions) (Kojima Yosuke)
Accessories: none
Power transformer primary: 100V secondary: CT-7.5V/1.5A × 4 CT-12.6V/2A 190-200-210V/AC1A W122 × H103 × D104 mm 5.8 kg (actual measurement, not including protrusions) Similar to a transformer made by Noguchi from the design, but details are unknown (Kojima Yosuke)
Choke transformer 5H/230mA maximum 380 mA W85 x H96 x D96 mm 2.6 kg (actual measurement, not including protrusions) There are scuffs, bumps, and paint peeling in places (Kojima Yosuke)
Accessories: none
Power transformer primary: 100-110V secondary: 6.3 V/2A × 2 6.3 V/3A × 2 40 V/30mA 10-135-155-175V/0.73 A W120 × H127 × D100 mm 5.0 kg (actual measurement, including protrusions) with original box (there is a lot of damage to the outer box, but there is no problem with the inner cushioning material) it seems to be an unused item from the state of the terminal! (Kojima Yosuke)
Accessories: original box
* Since the terminal board is cracked and bent, it is inexpensive. Power transformer primary: 90-100-110V secondary: C.T-6.3/3A x 2 5-6.3V/3A 350-310-0-40-310-350V/20mA W100 x H125 x D84 mm approx. 3.8 kg (actual measurement) rust floats and paint peels off a lot (Kojima Yosuke)
Accessories: none
Choke transformer 10H/180mA measured DCR166.6Ω W94 x H66 x D62 mm approx. 0.8 kg with original box, paint is peeled off, and there is a bend in the stay part (Kojima Yosuke)
Accessories: original box
How about a set of 2 air core coils of 3.30 mH for a self-made network, etc.? (TAMURA Eiji)
Maintenance information: 2023.9.13 Conductivity confirmed
Accessories: original box
How about a set of 2 air core coils of 3.00 mH for a self-made network, etc.? (TAMURA Eiji)
Maintenance information: 2023.9.13 Conductivity confirmed
Accessories: original box
An Acrotech balance connector that uses an XLR plug (male) pair Neutrick balanced 3-pin type connector. Easy assembly is achieved with a minimum number of components. The pins are gold-plated. There are no solder marks on the terminals and it is generally good (Murakoshi Yoichi)
Maintenance Information: 23.8.14
Accessories: none
Power transformer primary: 100-110V secondary: 6.3V/5A 6.3V/2A x 2 6.3V-CT/3A 270-0-250-270V/130mA W100 x H72 x D87 mm approx. 2.6 kg (actual measurement, not including protrusions) There is a lot of paint peeling due to rust floating (Kojima Yosuke)
Accessories: none
Choke transformer 10H/maximum 300mA DC resistance 81 ohms (actual measurement 80 ohms) W68 x H82 x D79 mm approx. 1.5 kg (actual measurement, not including protrusions) with original box, good appearance (Kojima Yosuke)
Accessories: original box
Power supply transformer input 100V output A power source: 6.3V/1A B power supply: 260V/30mA (with CT) 15,17V/2A (bridge only) W85 x H57 x D70 mm approx. 1.5 kg (actual measurement, not including protrusions) There are abrasions and blows (Kojima Yosuke)
Accessories: none
Power transformer primary: 90V/100V/110V secondary: 450-380-380-450V/DC220mA 15V/0.3A 12.6V/0.3A 6.3V/6A 5V/3A W134 × H98 × D112 mm approx. 6.5 kg (actual measurement, not including protrusions) There are abrasions and paint peeling in places (Yosuke Kojima)
Power transformer primary: 110-100-90V Secondary: 6.3V/3A 5V/2A CT-6.3V/3A 280V-240V-0-240V-280V/DC115mA The fixing bolt has been replaced in one place with a long one. The paint has peeled off a lot (Kojima Yosuke)
Accessories: none
※Only 1 output transformer single output 10 W primary side: 2.5 kΩ secondary side: 4/8/16 ohms W53 × H65 × D69 mm 0.72 kg/piece (not including protrusions) There are abrasions and bumps in places (Yosuke Kojima)
Accessories: none
Output transparent pair sales for 42/6AR5/6F6 single 5W/ch: 7 kΩ (actual measurement at 8 ohms 7.7/7.7 kΩ) Secondary: 4/8/16 Ω W60 × H78 × D63 mm 0.9 kg/piece (actual measurement, protrusions not included) * The manufacturing period is different on the left and right, and the pitch of the fastening screw (the screw is tight) and the design of the plate are different, so it's a bargain (the measured values on the primary side are the same value on the left and right) (there is no problem with the measured values on the left and right sides) (Koyojima)
Accessories: none
Power transformer primary: 100-110 V secondary: 50-55-60-65-70V/1A W88 x H76 x D38 mm 1.8 kg (not including protrusions) (Yosuke Kojima)
Accessories: none
Choke transformer 30H/120mA DC resistance 314Ω (actual measurement) W80 x H67 x D80 mm approx. 1.3 kg (actual measurement, not including protrusions) There is rust floating in places (Kojima Yosuke)
Accessories: none
Comes with original box. Genuine Fostex speaker grille It is made with a high-precision resin frame and steel mesh grille. Compatible with FE-126en, FF-125WK, etc. (Tetsuji Oikawa)
Accessories: original box, instruction manual
Comes with original box. Genuine Fostex speaker grille It is made with a high-precision resin frame and steel mesh grille. Compatible with FE-126en, FF-125WK, etc. (Tetsuji Oikawa)
Accessories: original box, instruction manual
Comes with original box. Genuine Fostex speaker grille It is made with a high-precision resin frame and steel mesh grille. Compatible with FE-126en, FF-125WK, etc. (Tetsuji Oikawa)
Accessories: original box, instruction manual
Power transformer primary: 100V secondary: 320-280V-0-70V-320V/280v/280mA, 5V/3A, 2.5V-6.3V/5.2 A×2, 6.3 V/3A Application examples: 2A3/6B4G/6L6/VT-52, etc. W120 × H120 × D105 mm approx. 5.2 kg (actual measurement, including protrusions) There are scratches and paint peeling in places (Kojima Yosuke)
Accessories: none
Choke transformer 5H/110 mA, maximum 160 mA, W61 x H71 x D52 mm, 0.7 kg (actual measurement, not including protrusions), with original box, there are minor bumps in places (Kojima Yosuke)
Accessories: original box
Choke transformer 5H/110 mA, maximum 160 mA, W61 x H71 x D52 mm, 0.7 kg (actual measurement, not including protrusions), with original box, there are minor bumps in places (Kojima Yosuke)
Accessories: original box
Choke transformer 5H/110 mA, maximum 160 mA, W61 x H71 x D52 mm, 0.7 kg (actual measurement, not including protrusions), with original box, there are minor bumps in places (Kojima Yosuke)
Accessories: original box
Choke transformer 5H/200mA DCR: 75.3 Ω (actual measurement) W79 x H72 x D78 mm 1.2 kg (actual measurement, not including protrusions) There are bumps in places (Yosuke Kojima)