Payment and point member | Payment methods | Shipping methods | Warranty policy | Shopping procedure
- All
- All hardware
- All software
- Network players
- Integrated amplifiers
- Integrated amplifiers (transister)
- Integrated amplifiers (tube type)
- Control amplifiers (transister)
- Control amplifiers (tube type)
- Power amplifiers (transister)
- Power amplifiers (tube type)
- Channel dividers
- Tuners
- Other amplifiers
- Channel divider boad
- Speakers (foreign companies)
- Speakers (Japanese companies)
- Full range units
- Woofers
- Drivers
- Tweeters
- Horns
- Enclosures
- Networks
- Speaker accessories
- Turntables
- Tonearms
- Step-up transformers
- Head amplifiers
- Phono equalizers
- Cartridges
- Headshells
- D/A converters
- DAT decks
- MD players
- LD players
- DVD players
- CD players
- CD transports
- Cassette decks
- Reel-to-reel decks
- Other tapes
- Accessories
- Cables
- Insulators
- Racks
- Parts
- Tubes
- Manual
- Audio set
- Other audio
- LP jazz
- LP jazz vocal
- LP classic
- LP foreign music
- LP Japanese music
- Single records
- SP
- Other records
- Other soft
- Reel-to-reel tape
- Reel-to-reel tape jazz
- Reel-to-reel tape classic
- Other reel-to-reel tape
- Blank cassette tapes
- Laser disk
- DVD
- VHS
- Laser disk jazz
- Laser disk classic
- Other laser disk
- Laser disk movie
- CD jazz
- CD jazz vocal
- CD classic
- CD foreign music
- CD Japaese music
- Single CD
- Other CD
- Magazines
- STEREO SOUND
- MJ
- Other books
- Swing journal
- STEREO SOUND EX
- TUBE KINGDOM
- TAPE SOUND
- analog
- AUDIO ACCESSORY
- AUDIO PLAN
- AUDIO CRAFT MAGAZINE
- AUDIO BASIC
- JAZZ CRITIQUE
- stereo
- FM fan
- RADIO TECHNOLOGY
- RG
- description
- Maintained! A network with a crossover frequency of 7 kHz. Ideal for MID/HIGH 3-WAY systems using the 2440. The exterior is dull, dirty, and rusty (Mizusaki Ryo) Maintenance Information: 2022.10.7 Maintained (Terminal rust removal, acid cleaning, insulation bushing & mounting screw replacement. ATT replacement A frequency characteristic measurement check (~ approx. 42 kHz) was performed, and the original capacitor was continuously used for good results. Input/output waveform and balance check, sound output check.) Accessories: none Main specifications: crossover frequency 7 kHz allowable input (continuous program) 50 W impedance bass range: 12 to 16 ohms treble range: 12 to 16 ohms treble attenuation/variable volume mounting hole W140 x 108 mm 0.7 kg
- description
- *Only one unit is sold. The crossover can be switched between 2500 Hz and 3500 Hz by switching the internal wiring of the Pioneer 2-way network, so you can use it according to your system. If you have an AE-200, you can install it as is (Ryo Mizusaki) Maintenance Information: 2022.6.10 Confirmation Confirmed Accessories: original box, instruction manual, screws Main specifications: Attenuation 12dB/oct impedance 8Ω crossover frequency mid to high range: 2.5 kHz, 3.5 kHz Maximum input 100W constant loss 1dB or less Mounting opening dimensions 100mm wide x 137mm high Mounting hole dimensions 110 x height 148 mm weight 0.3 kg
- description
- This high-pass filter is recommended for the super tweeter PT-R100. The frequency to be cut can be selected with the 12/16/20kHz terminal to be connected. The exterior has noticeable scratches and scratches. (Tamura Eiji) Maintenance information: 2022.12.2 operation confirmed Accessories: There are no accessories Main specifications: Crossover frequency: 12K/16K/20kHz (-12dB/OCT) switchable impedance 8Ω maximum input 100W W150 x H105 x D85 mm 1.0 kg
- description
- Maintained! A network with a crossover frequency of 7 kHz. Ideal for MID/HIGH on 3-way systems using 2440. The exterior has dullness and paint deterioration. Serial 18234 17093 (Asane Tomonori) Maintenance information: 2022.10.8 Maintained (terminal rust removal pickling cleaning insulation bushing & mounting screw replacement ATT brand new replacement. Frequency characteristics measurement check (~ approx. 42 kHz) is performed, and the original capacitor is continued to be used for good results. Input/output waveform and balance check sound output check) Accessories: There are no accessories Main Specifications: Crossover Frequency 7 kHz Allowable Input (Continuous Program) 50W Impedance Bass Range: 12 to 16 Ω Treble Range: 12 to 16 Ω Treble Attenuation/Variable Volume Mounting Hole W140 x 108 mm 0.7 kg
- description
- Maintained! A network with a crossover frequency of 7 kHz. Ideal for MID/HIGH on 3-way systems using 2440. The exterior has dullness, abrasion, and paint deterioration. Serial 20837/22189 (Eiji Tamura) Maintenance information: 2022.10.30 Maintained (terminal rust removal pickling, cleaning, insulation bushing & mounting screw replacement. ATT is replaced with a brand new one. The frequency characteristics were measured and checked (~ approx. 42 kHz), and since the results were good, the original capacitors were continued to be used. Input/output waveform and balance check, sound output check.) Accessories: none Main Specifications: Crossover Frequency 7 kHz Allowable Input (Continuous Program) 50W Impedance Bass Range: 12 to 16 Ω Treble Range: 12 to 16 Ω Treble Attenuation/Variable Volume Mounting Hole W140 x 108 mm 0.7 kg
- description
- Maintained! Professional cross 800Hz network. The internal capacitor was replaced with a Dayton one. It's an exhilarating sound with a great vantage point. How about making a 2WAY horn system with a 16Ω unit? serial 28100/28523 Maintenance information: 2020.6.4 Maintenance implementation (terminal rust removal pickling treatment, cleaning, insulation bushing & mounting screw replacement, SW type ATT contact cleaning, frequency characteristic measurement check, and continued use of the original capacitor for good results ~ approx. 42 kHz, input/output waveform and balance check, sound output check) Accessories: none Main specifications: Crossover frequency 800 Hz impedance 12 to 16 Ω W122 × H154 × D132 mm 1.9 kg/1 unit
Manufacture:BELL WOOD LANSING
Price: JPY 22,727(pair)Sold Out
- description
- Bellwood's 2-way network crossover is 7 kHz. A FOSTEX attenuator is attached to the high frequency section, so sound pressure can be adjusted. Recommended for those who want to add Twitter to the full range unit. The exterior is clear and there is a feeling of use (Kobayashi Hitoshi) Maintenance Information: 2022.11.8 Operation confirmed Accessories: none Main specifications: Crossover frequency: 7kHz 8Ω attenuation: 12dB/oct W170 × H100 × D140 mm 0.88 kg
- description
- It is a 2-way crossover network manufactured for PIONEER's low frequency crossover. There are appearance, dullness, and abrasions (Kobayashi Hitoshi) Maintenance Information: 2022.11.8 Operation confirmed Accessories: none Main specifications: impedance 8Ω crossover 500Hz/800Hz maximum input 100W dimensions W260 x H65 x D151 mm weight 1.9 kg
- description
- Attenuators, insulating bushings, etc. were replaced with new ones in 2017/8! The terminal is carefully polished at the point where it is conducted, and the resistance value is lowered as much as possible. With a 7000 Hz crossover, it's perfect for tweeters such as 075 and 077. The exterior has spots and deterioration. Serial 19618/19692 (Satoshi Yoneshima) Maintenance Information: 2022.9.10 Maintained (All parts inspected and cleaned. Tighten the terminal mounting screws again. (Characteristics measurement and sound output check OK) 2017.8.21 Maintained (terminal rust removal, cleaning, screw washer type replacement. ATT exchange. Check the input/output waveform and balance, and check the sound output. (Frequency characteristic measurement check (~ approx. 42 kHz) was performed and the original capacitor was used for good results.) Accessories: There are no accessories Key Specifications: Variable Level Control Crossover Frequency 7kHz 8Ω Weight 900g
- description
- Maintained! A network with a crossover frequency of 7 kHz. Perfect for MID/HIGH on 3-way systems using 2440. The exterior has dullness and paint deterioration. Serial 1260/16994 (Miura Kimiya) Maintenance Information: 2022.10.9 Maintained (Terminal Rust Removal, Pickling, Cleaning, Insulating Bushing & Mounting Screw Replacement. ATT brand new replacement. A frequency characteristic measurement check (~ 42 kHz) was performed, and the original capacitor was continuously used for good results. (Check input/output waveform and balance, check sound output) Accessories: There are no accessories Main specifications: crossover frequency 7 kHz allowable input (continuous program) 50W impedance bass range: 12 to 16 ohms treble range: 12 to 16 ohms treble attenuation/variable volume installation Hole W140 x 108 mm 0.7 kg
- description
- Maintained! A network with a crossover frequency of 7 kHz. Perfect for MID/HIGH on 3-way systems using 2440. The exterior has dullness and paint deterioration. Serial 10523, 10528 (Murakoshi Yoichi) Maintenance Information: 2022.10.4 Maintenance (Terminal Rust Removal, Pickling, Cleaning, Insulating Bushing & Mounting Screw Replacement. ATT brand new replacement. A frequency characteristic measurement check (~ 42 kHz) was performed, and the original capacitor was continuously used for good results. Check the input/output waveform and balance, and check the sound output.) Accessories: none Main specifications: crossover frequency 7 kHz allowable input (continuous program) 50 W impedance bass range 12 to 16 ohms treble range 12 to 16 ohms treble attenuation/variable volume mounting hole W140 x 108 mm 0.7 kg
- description
- Maintained! A network with a crossover frequency of 7 kHz. Perfect for MID/HIGH on 3-way systems using 2440. The exterior has dullness and paint deterioration. Serial 17694, 18736 (Miura Kimiya) Maintenance Information: 2022.6.25 Maintained (Terminal Rust Removal, Pickling, Cleaning, Insulating Bushing & Mounting Screw Replacement. ATT brand new replacement. A frequency characteristic measurement check (~ 42 kHz) was performed, and the original capacitor was continuously used for good results. (Check input/output waveform and balance, check sound output) Accessories: There are no accessories Main specifications: crossover frequency 7 kHz allowable input (continuous program) 50W impedance bass range: 12 to 16 ohms treble range: 12 to 16 ohms treble attenuation/variable volume installation Hole W140 x 108 mm 0.7 kg
- description
- Maintained! A frequently used crossover 800Hz network. Although it has an impedance specification of 8 ohms, it is an excellent product that can match 375 (16 ohms) without changing the characteristics due to the correction circuit. The exterior is dark and has small scratches (Wang Exhibition) Maintenance information: 2019.1.4 Maintained (terminal rust removal, cleaning. Insulating bush mounting screw replacement. ATT exchange. Frequency characteristics were measured and checked, and the original capacitor was continuously used for good results. (Check input/output waveform and balance, check sound output) Accessories: none Main specifications: allowable input 100W 8Ω body size W121 x H152 x D75 mm case size W175 x H90 x D225 mm approx. 2.7 kg
- description
- Maintenance such as attenuator replacement has been completed! 2-way network. It is a model that can be used with peace of mind because it is a standard JBL network and there are many users. The exterior has overall stains, surface paint deterioration, etc. (Wang Zhan) Maintenance information: 2019.6.4 Maintained (terminal rust removal, cleaning. Insulating bushing & mounting screw replacement. ATT exchange. Frequency characteristics were measured and checked, and the original capacitor was continuously used for good results. (Check input/output waveform and balance, check sound output) Accessories: none Main specifications: 2-way crossover 8kHz impedance 12 to 16 ohms allowable input 50W attenuator continuously variable type
- description
- Maintained With a crossover of 7000 Hz, the perfect network for tweeters such as 075 and 077! Please enjoy using it in a way that suits your purpose, such as 2 way or 3 way (Sasaki Shota) Maintenance Information: 2022.5.10 Maintained (Terminal Rust Removal, Pickling, Cleaning, Insulating Bushing & Mounting Screw Replacement. ATT brand new replacement. The capacitor had already been replaced elsewhere, but it was removed due to a difference in capacitance (modification), returned to the original capacitor left inside the housing, and performed a frequency characteristic measurement check (~ 42 kHz) to make sure there is no problem confirm. Check the input/output waveform and balance, and check the sound output.) Accessories: none Key Specifications: Variable Level Control Crossover Frequency 7kHz 8Ω Weight 900g
- description
- It has been maintained. With a crossover of 7000 Hz, the best network for tweeters such as 075 and 077! Please enjoy it in a way that suits your purpose, such as 2way and 3way (Yoichi Murakoshi) Maintenance Information: 2022.5.12 Maintenance (Terminal rust removal, pickling, cleaning, insulation bushing & mounting screw replacement. ATT new replacement Frequency characteristic measurement check (~ about 42kHz) is performed, and the original capacitor is continued to be used for good results. (Check input/output waveform and balance, sound output check.) Accessories: none Key Specifications: Variable Level Control Crossover Frequency 7kHz 8Ω Weight 900g
- description
- We have confirmed that sound is emitted for both the LOW pass and the HIGH pass, and the details have not been checked and it will be passed Constant Resistance Parallel High-Low Pass Filter for Pioneer PT-R7 The cross is 8,000 Hz. Air core coils with low DC resistance and low loss are used. The exterior is good (Hitoshi Kobayashi) Maintenance Information: 2022.8.28 Conduction Confirmed Accessories: none Main specifications: 8,000 Hz 8Ω 12dB W120 × H35 × D120 mm (actual measurement) 300g
- description
- Attenuators, insulation bushings, etc. have been replaced with new ones in 2018/11! The resistance value is lowered as much as possible by carefully polishing the terminals where the conduction is conducted. With a crossover of 7000Hz, it is ideal for tweeters such as 075 and 077. The appearance may be dull or deteriorated. Serial 19618/19692 (Satoshi Yonejima) Maintenance information: 2018.11.28 Maintained (terminal re-tightening, cleaning. ATT cleaning Check input/output waveform and balance, and sound output check. Frequency characteristic measurement check. (The capacitor was replaced with AudynCap on 2015.12.10) Key Specifications: Variable Level Control Crossover Frequency 7kHz 8Ω Weight 900g
- description
- Technics's 2-way network, cross is 5,000 Hz. The wiring cable of the previous owner is attached as it is (Shota Sasaki) Accessories: none Main specifications: 2way network 8Ω crossover 5kHz attenuation 12dB/oct
- description
- This high-pass filter is recommended for the Super Tweeter PT-R100. It is possible to select the frequency to be cut with the 12/16/20kHz terminal to be connected. The appearance is dullness and chipping in the red-black ring of the terminals. (Tamura Eiji) Maintenance information: 2022.8.13 Sound output confirmation Accessories: No accessories Main specifications: Crossover frequency: 12K/16K/20kHz (-12dB/Oct) switchable impedance 8Ω maximum input 100W W150 × H105 × D85mm 1.0 kg
- description
- This high-pass filter is recommended for the Super Tweeter PT-R100. It is possible to select the frequency to be cut with the 12/16/20kHz terminal to be connected. The appearance is dull. (Tamura Eiji) Maintenance information: 2022.8.13 Sound output confirmation Accessories: No accessories Main specifications: Crossover frequency: 12K/16K/20kHz (-12dB/Oct) switchable impedance 8Ω maximum input 100W W150 × H105 × D85mm 1.0 kg
Manufacture:TOA
Price: JPY 7,273(pair)Sold Out
- description
- * Currently sold item. A network with a round and simple design that catches the eye. It's an affordable price, so how about those who are thinking of making their own in 2 WAY? Appearance, dullness, abrasions, there are dents (Hitoshi Kobayashi) Maintenance information: 2022.7.12 Operation confirmed Accessories: none Main specifications: Crossover 500Hz 100W 8Ω W138 × H138 × D140mm 1.9 kg
- description
- Maintenance has been completed! Network with a crossover frequency of 7 kHz. Ideal for MID/HIGH in 3WAY systems using 2440. The appearance has a feeling of use such as small scratches and dullness. Serial 15615 15685 (Asaine Tomoho) Maintenance Information: 2022.7.10 Maintained (Terminal Rust Removal Pickling, Cleaning, Insulating Bushing & Mounting Screw Replacement. ATT new replacement Frequency characteristic measurement check (~ about 42kHz) is performed, and the original capacitor is continued to be used for good results. (Input/output waveform and balance check, sound output check) Accessories: none Main Specifications: Crossover Frequency 7kHz Allowable Input (Continuous Program) 50W Impedance Bass Range: 12-16Ω Treble Range: 12-16Ω Treble Attension/Variable Volume Mounting Hole W140 x 108 mm 0.7 kg
- description
- It has been maintained. With a crossover of 7000 Hz, the best network for tweeters such as 075 and 077! Please enjoy using it in a way that suits your purpose, such as 2-way and 3-way. The appearance has a feeling of use such as dullness. Serial 17288 18098 (Asaine Tomoho) Maintenance information: 2022.5.14 Maintained (housing wash terminal rust removal pickling cleaning insulation bushing & mounting screw replacement ATT new replacement frequency characteristic measurement check (~ approx. 42kHz) and continue to use the original capacitor for good results input/output waveform and balance check sound output check) Accessories: none Key Specifications: Variable Level Control Crossover Frequency 7kHz 8Ω Weight 900g
- description
- The price has been reduced! 2019/11/24 Selling price 75,000 yen Maintained! It is a cross 800Hz network that is very useful. The impression is that the low frequencies are pushed out smoothly, and the clarity of the mid-high frequencies is improved. It is a network that is useful for making a 2-way system that gives the woofer a certain amount of space. The exterior has a feeling of use and small scratches.. Serial 11409/11812 (Kei Otani) Maintenance information: 2019.11.24 Operation confirmed 2015.6.15 Maintained (terminal polishing, cleaning, insulation bush replacement, SW ATT cleaning, input/output waveform and balance check, sound output check, frequency characteristic measurement check/ ~ approx. 42kHz) Accessories: none Main specifications: Crossover frequency 800 Hz Impedance 12 to 16 Ω W122 × H154 × D132 mm 1.9 kg/1 unit
Manufacture:GOODMANS
Price: JPY 4,545(only one piece)Sold Out
- description
- The disposal price has been reduced! (Member discounts are not applicable) 2021/2/6 selling price 10,000 yen* There is no problem with the operation, but since it is cheap, it will be handed over as it is. A 3WAY crossover network made exclusively for the company's horn squawker unit MIDAX950. There are scratches and threads on the appearance. (Kimiya Miura) Maintenance information: 2021.2.6 operation confirmed Accessories: No accessories Main specifications: 15Ω crossover frequency 950 Hz/5,000 Hz W167 × H105 × D105 mm 1.5kg/piece
- description
- It's been maintained! With a crossover 7000Hz, the perfect network for tweeters such as 075 and 077! Please enjoy using it according to your purpose, such as 2-way or 3-way. The appearance is painted bald and dull. Serial 27176/27235 (Kimiya Miura) Maintenance Information: 2022.5.22 Maintained (Terminal rust removal pickling, cleaning, insulation bushing & mounting screw replacement. ATT brand new replacement Frequency characteristic measurement check (~ 42 kHz) was performed and the original capacitor was continued to be used for good results. (Check input/output waveform and balance, check sound output) Accessories: No accessories Key Specifications: Variable Level Control Crossover Frequency 7kHz 8Ω Weight 900g
- description
- It's been maintained! The network used for A5. The sound loss is very good, probably because of the crossover 500Hz large capacitor. There is an overhang and the goodness of sharpness is impeccable! It is a very attractive sound not only for Altec users but also for 500Hz networks. * The age is slightly different on the left and right. Appearance has aging small scratches, dullness, etc. (Satoshi Yonejima) Maintenance Information: 2022.4.1 Maintained (Removed wire scraps soldered to terminals. Re-fix the unfixation of the large coil inside the housing with silicone sealant, and take measures to hold the sponge with scissors and the top plate. ATT (threaded) contact cleaning, rust removal of screws and bridge plates Frequency characteristic measurement check (~ 42 kHz) was performed and the original capacitor was continued to be used for good results. (Check input/output waveform and balance, check sound output) Accessories: No accessories Main specifications: Crossover 500Hz HF gain 4-stage switching (short plate) W203 × H270 × D115 mm
- description
- It's a crossover network. It has exactly the same structure as the company's X8. This network is recommended when using BB4 with T350, etc., or 12TRXB. The overall appearance is dirty and dull. (Yasuhito Koshihama) Maintenance information: 2020.11.2 Store operation confirmed (sweep, music signal output OK) Accessories: none Main specifications: Crossover frequency 3,500Hz 8Ω Allowable input 100W External dimensions W114 × H89 × D92 mm Weight 680g
- description
- It has been maintained in 2020. It is a network used for A5, A7, etc. Unlike channel dividers, it's easy to handle and sounds familiar to your ears (Yoichi Murakoshi) Maintenance Information: 2020.9.19 Maintained (Replace input terminals with banana-compatible general-purpose products. Output terminal solder removed. Capacitor fixing and wiring insulation. ATT disassembly contact cleaning, contact grease application. Frequency characteristic measurement check (~ 42 kHz) was performed and the original capacitor was continued to be used for good results. (Check input/output waveform and balance, check sound output) Accessories: None Main specifications: Crossover 500Hz 8Ω W123 × H140 × D132mm 1.6kg
Manufacture:ARACRAFT
Price: JPY 63,636(pair)Sold Out
- description
- * Currently sold products. An ARACRAFT network that custom JBL 3115. Detailed specs are unknown, but the crossover seems to be 500Hz. (Itsuro Mizushima) Maintenance Information: 2021.5.17 Operation confirmed Accessories: None Main specifications: W120 × H155 × D183 mm 3.8 kg
- description
- It's been maintained! This high-pass filter is recommended for the Super Tweeter PT-R100 released in 2002. It is possible to select the frequency to be cut by the 12/16/20kHz terminal to be connected. There are several repairs for chipping wounds each (Yoichi Murakoshi) Maintenance Information: 2022.4.23 Maintenance (terminal installation, defect site putty filling, only the putty part after enamel painting. (Network characteristics measurement.) 2022.4.1 Each input and output sound has been confirmed Accessories: None Main specifications: Crossover frequency: 12K/16K/20kHz (-12dB/oct) Switchable impedance 8Ω Maximum input 100W W150 × H105 × D85mm 1.0 kg
- description
- A rare item. It is a network that was sold for the high range of the GAUSS CP-3820. 13kHz and 8kHz can be switched by internal wiring. * The included coil was about 0.5Ω 0.51 mH at the actual measured value (Fujisawa Koshi) Accessories: instruction manual, original box, 4 coils Main specifications: Crossover 13000Hz (8000Hz) 8Ω
- description
- It has been maintained. With a crossover 7000Hz, the perfect network for tweeters such as 075 and 077! Please enjoy using it according to the purpose such as 2way or 3way (Oikawa Tetsuji) Maintenance Information: 2022.4.27 Maintained (terminal rust removal pickling, cleaning, insulation bushing & mounting screw replacement. ATT brand new replacement Since the capacitor has been replaced elsewhere (made by DAYTON), a frequency characteristic measurement check (~ 42 kHz) is performed to confirm that there is no problem. (Check input/output waveform and balance, check sound output) Key Specifications: Variable Level Control Crossover Frequency 7kHz 8Ω Weight 900g
- description
- Maintained! A crossover 1500Hz network that is perfect for combining LE14A with 175DLH and LE175. How about a middle class 2WAY system etc. (Sasaki Shota) Maintenance information: 2020.12.5 Maintained (terminal rust removal pickling, cleaning, insulation bushing & mounting screw replacement. ATT new replacement Frequency characteristic measurement check (~ approx. 42 kHz) is performed and the original capacitor is continued to be used for good results. (I/O waveform and balance check, sound output check) Accessories: None Main specifications: Crossover frequency 1500Hz level control volume type input impedance 8Ω
- description
- Coral professional 3-way network Although it is a standard product, it is a gem that you don't see much. (Fujisawa Yukishi) Accessories: original box, instruction manual Main specifications: Crossover 300Hz/3500Hz impedance 8/16Ω compatible (using jumper wire) withstand input 30W W115 × H10 × XD80mm 1.3kg
- description
- * Currently sold items. It is cheap because it is in poor condition. Network for super tweeters. It is a high-pass filter developed for PIONEER's PT-R9. It is a network that goes well with the company's ribbon tweeters and makes high frequencies sound refreshingly. There is stickiness of paint deterioration due to aging, and there is a feeling of use. (Yoichi Murakoshi) Maintenance information: 2022.3.26 sound output confirmed Accessories: None Main specifications: high-pass filter impedance 8Ω cut-off frequency 20kHz attenuation 12dB dimensions W127 × H30 × D65mm weight 145g
- description
- It is a high-pass filter recommended for the Super Tweeter PT-R100 released in 2002. It is possible to select the frequency to be cut with the 12/16/20kHz terminal to be connected. The appearance is Kusumi and there are abrasions. (Hitoshi Kobayashi) Maintenance information: 2022.4.3 operation confirmed Accessories: None Main Specifications: Crossover Frequency: 12K/16K/20kHz (-12dB/Oct) Switchable Impedance 8Ω Maximum Input 100W W150 × H105 × D85mm 1.0 kg
- description
- It is a 2-way dividing network specially developed to fit each unit in the Coral Pro Series. The sound quality is clear and sharp (Fujisawa Yukishi) Maintenance information: 2022.3.23 operation confirmed Accessories: None Main Specifications: Dividing Network Crossover 7000Hz Impedance 8Ω Maximum Input 200W W310 × H90 × D220mm 2.8kg
- description
- It is an N8000 that has been refreshed by replacing the attenuator. It is mainly suitable for 3way high range and is ideal for combination with JBL LE175, LE85/075, 077. The appearance is dull and has small scratches (Oikawa Tetsuji) Maintenance information: 2019.2.19 Maintained (2019.2.18 Terminal rust removal, cleaning, insulation bushing & mounting screw replacement. ATT replacement Frequency characteristic measurement check (~ approx. 42 kHz) is performed and the original capacitor is continued to be used for good results. (I/O waveform and balance check, sound output check) Accessories: None Main specifications: Variable level control crossover frequency 8kHz 8Ω weight 0.9kg
- description
- Maintained! A type with few exhibitions! Crossover 800Hz network. It is an indispensable gem for 2-way systems. There is a feeling of use, Kusumi, small scratches (Sasaki Shota) Maintenance information: 2020.5.19 Maintained (terminal rust removal (pickling), cleaning, insulation bushing & mounting screw replacement. ATT (SW type) contact cleaning The fixing of coils, etc. inside the housing is reinforced with silicon. Frequency characteristic measurement check (~ approx. 42 kHz) is performed and the original capacitor is continued to be used for good results. (I/O waveform and balance check, sound output check.) Accessories: None Main specifications: Impedance/bass range 8Ω, treble 16Ω crossover 800Hz high frequency boost 3-stage switching
Manufacture:Audio Tekne
Price: JPY 143,636(pair)Sold Out
- description
- A model made as a network for the company Tweeter 1710 and speakers SP-8716. The surroundings are covered with carbon, and the inside uses a super permalloy core. Improvement of lingering and natural sound reproduction can be obtained by improving network filter characteristics and auditory distortion. The appearance has abrasions and scratches. (Eiji Tamura) Maintenance information: 2022.1.21 operation confirmed (ATT is also not available) Accessories: No accessories Main specifications: 8Ω/16Ω switching SW ATT5 stage change switching W270 ✕ H110 ✕ D385mm Weight 12.2kg
Manufacture:SANSUI
Price: JPY 2,727(pair)Sold Out
- description
- The network used in the SANSUI SP-70. How is it self-acting or stocking? The appearance may be dull or dirty. (Eiji Tamura) Maintenance information: 2022.1.19 sound output confirmed Accessories: none Key Specifications: Attenuation 12dB/Oct Crossover Frequency 6000Hz 8Ω 97dB
- description
- Maintained! It is an Altec 2-way crossover 800Hz network. Equipped with an attenuator Please use this when you want to change A5 or A7 to 800Hz. The appearance has oxidation and dullness, etc. Serial 15256/16464 (Tamura Eiji) Maintenance information: 2020.9.21 maintained (input terminal replacement (banana plug compatible product). Clean the output terminals. ATT disassembly contact cleaning, contact grease application. A frequency characteristic measurement check (~ 42 kHz) is performed, and the original capacitor is continuously used for good results. (Input/output waveform and balance check, sound output check) Accessories: No accessories Main Specifications: Allowable Input 100W Input Impedance 8Ω Attenuator 1dB to 10dB Crossover Frequency 800Hz Dimensions W122×H140×D143mm Weight 1.6kg
- description
- The price has been reduced. 2020/11/8 Sales price 50,000 yen has been maintained. 2-way dividing network. There are many users on the JBL standard network, and it is a model that you can use with confidence. Serial 19582 19473 (Takasaki Atsushi) Maintenance information: 2020.10.30 Maintenance carried out (terminal rust removal pickling, cleaning, insulation bush & mounting screw replacement, ATT new replacement, frequency characteristic measurement check for good results (Continued use of original capacitors ~ approx. 42 kHz, input/output waveform and balance check, sound output check) Accessories: none Main Specifications: 2-way Crossover 8kHz Impedance 12~16Ω Allowable Input 50W Attenuator Continuously Variable
Manufacture:JBL
Price: JPY 50,000(pair)Sold Out
- description
- Maintenance has been completed! Crossover 1500Hz network perfect for combination with LE14A and 175DLH and LE175. How about a middle class 2WAY system, etc. Serial 10232, 27866 (Hiroshi Kondo) Maintenance Information: 2020.12.5 Maintained (terminal rust removal pickling, cleaning, insulation bushing & mounting screw replacement. ATT brand new replacement Perform a frequency characteristic measurement check (~ about 42kHz) and continue to use the original capacitor for good results. (Input/output waveform and balance check, sound output check) Accessories: None Main specifications: Crossover frequency 1500Hz level control volume type input impedance 8Ω
- description
- Maintenance has been completed! A network with a crossover frequency of 7 kHz. Ideal for MID/HIGH for 3WAY systems using 2440. The appearance has a feeling of use and small scratches.. Serial 24262/29201 (Kei Otani) Maintenance information: 2019.11.24 Operation confirmed 2019.5.6 Operation confirmed 2016.12.19 Maintained (ATT replacement terminal polishing cleaning insulation bush, mounting screw replacement coil disconnect adhesive input/output waveform and balance check, (Sound output check Frequency characteristic measurement check* Capacitors remain original) Accessories: None Main Specifications: Crossover Frequency 7kHz Allowable Input (Continuous Program) 50W Impedance Bass Range: 12 to 16 Ω Treble Range: 12 to 16 Ω Treble Attenuation/Variable Volume Mounting Hole W140×108mm 0.7kg
- description
- The price has been reduced! 2020/9/21 Selling price 75,000 yen maintained. It is a network used for A5, A7, etc. Unlike channel dividers, it is easy to handle and sounds familiar to your ears. Appearance is scratched, dull. Serial 30386, 30733 (Asaine Tomoho) Maintenance information：2020.9.21 Maintenance completed (pickling input terminals and screws Rust removal cleaning output terminal solder removal ATT disassembly contact cleaning contact grease application frequency characteristics (Measurement check (~ about 42kHz) and continue to use original capacitor for good results Input/output waveform and balance check sound output check) Accessories: None Main specifications: Crossover 500Hz 8Ω W123 × H140 × D132mm 1.6kg
Manufacture:コイズミ無線
Price: JPY 2,727 Sold Out
- description
- *Only one unit. Koizumi wireless 2-way network. The cross will be 3,000 Hz. It is recommended for those who want to create mono by making their own. The appearance is dull. (Eiji Tamura) Maintenance information: 2021.11.18 sound sound confirmed Accessories: No accessories Main specifications: Impedance 8 Ω cross 3,000 Hz
Used
Consigned
Hold
Reserved
Sold Out-
-
- Company profile
- Privacy policy
- Contact
- Newsletter back issues
- Hi-Fi Do live camera!
- Today's software
- Today's hardware
- New arrival alert system
- Japanese
-
Hi-Fi Do Online Newsletter
-
Payment methods
-
Shipping methods
-
Warranty policy
-
Shopping procedure
-
Hi-Fi Do Record Shops Softs, Audio parts and Tubes can ship overseas.Ordinary,we use EMS but for large order,we use SAL or Surface.For Asia,it cost 1,200JPY/1LP,900JPY/1CD.Please check at the shipping cost table for more detail.
-
Meaning of icons
