Original Nautilus which replaced all units in 2015. The color is midnight blue, reminiscent of deep sea blue. Stereoscopic sound like you can grasp the sound particles by hand. It wraps the whole body in the low range that sinks deeply and softly and in the medium and high range like fine powder. A spatial representation given only to perfectly time-aligned speakers. The slightly sweet and familiar tone is also pleasant. There are no scratches on the unit. Serial No.00163/00164 (Yoichi Murakoshi)
Maintenance information: 2015.8.6 Marantz service (MID RANGE DRIVER UPPER (TYPE2, MID RANGE DRIVER LOWER (TYPE5, B UNIT DRIVER (TYPE24) NAU, HF DRIVER (TYPE28) NAUTILUS B unit replaced. (Chandeba was repaired and each unit chip was replaced)
Accessories: 2 dedicated channel dividers, 2 power cables, 2 protective covers, instruction manual
Main specifications: 4-way 4 speakers reproduction frequency band 10Hz to 25kHz impedance 6Ω Size W420 × H1050 × D900mm Weight 60kg (body) 50kg (pedestal)
The original model of Nautilus! All units renewed. Comes with dedicated channel divider. This pair has high response and produce real and clear sound. The covers have scratches but the overall condition if fine.
The original model of Nautilus! All units renewed. Comes with dedicated channel divider. This pair has high response and produce real and clear sound. Some scratches on the side.
The interior and exterior have been restored! This time, the Paragon has a LE15A blue frame (edges replaced with urethane), an LX5 blue cover, and a mid-early specification with all 16Ω units! There is a mount space for the company's power amplifier, the SE408, on the back of the enclosure. Compared to the mid-term model, it makes a lot of noise, and it feels like it's pouring over your body. If you take up a large space and make a sound image, the sound image will come to light, and this is addictive! I recommend the mid-early model, which is hard to come across! * Since there is no mounting bracket that connects to the main body, it is fixed at 4 places on the front and back (Yosuke Kojima)
Maintenance information: 2023.8.11 Maintained (exterior repair/polishing/oil finishing. Front load, rear baffle, bottom, connecting surface, reflective plate back, 4 legs, other metal parts paint, adjuster polish, horn paint. TW window saran replacement. Woofer maintenance (edge replacement, terminal cleaning), driver maintenance (magnetic circuit rust removal/gap cleaning/center adjustment, sound absorbing material replacement, terminal contact cleaning), tweeter maintenance (horn polishing, magnetic circuit rust removal/gap cleaning, terminal contact cleaning), network maintenance LX5 (terminal rust removal, cleaning, insulation bush & mounting screw replacement. ATT (SW type) contact dismantling contact polishing/cleaning. Frequency characteristic measurement checks (~ approx. 42 kHz) were performed, and the results were good, so the original capacitor was continuously used. (Input/output waveform and balance check, sound output check.) N7000 (terminal rust removal, pickling, insulation bush & mounting screw replacement. ATT new product exchange. Frequency characteristic measurement checks (~ approx. 42 kHz) were performed, and the results were good, so the original capacitor was continuously used. (Input/output waveform and balance check, sound output check)
Accessories: none
Main specifications: 3-way speaker all Alnico unit 16Ω LE15A blue frame (serial 5641, 5642), 375 (serial 4689, 4692), 075 (serial 41571, 41572), LX5 blue box (serial 8334, unknown), N7000 (serial 2773, 2776), enclosure serial 445 (plate serial 41054) crossover 500Hz/ 7,000 Hz W2,640 x H902 x D740 mm Total weight approx. 200 kg
Yonematsu plywood baffle with special wooden stand! The easiest to use permanent type from the Clang Film era of Eurodyne. A robust construction that has been invested in materials, including drivers, woofers, networks, and cast iron horns. It's overwhelmingly bolder and more convincing than the Siemens era. The unique, indescribable atmosphere and mid range cannot be produced by any modern speaker. Be sure to try Eurodyne when it's at its best! ※A self-made baffle stand made with a shorter depth is also included, so please use it when you want to adjust the depth (Fujisawa Koshi)
Maintenance information: 2023.4.13 operation confirmed
Accessories: stand for self-made baffles
Main specifications: 2WAY2 speaker impedance 15Ω woofer KI.L406 driver KI.L302 network KI.LZ433 enclosure KI.L439 W483 x H813 x D415 mm (actual measurement of the main unit, height 1120 mm when including stand) baffle size W1800 x H1800 x D900 mm
Original GRF finished maintenance and commercialized. Stereo playback by 2 speakers seems to be the best match with the monitor gold 15 units. Please enjoy the stunning hole-tone and sound localization of the classic with a deep sound like a tannoi. (KONDO Hirotsugu)
Maintenance Information: 2021.2.18 Maintenance (Exterior repair and cleaning
Saran net cleaning and retension
Unit Maintenance (Low Range: Magnetic Circuit Rust Removal, In-Gap Cleaning Center Adjustment, High Range Side: Magnetic Circuit Rust Removal, In-Gap Cleaning Center Adjustment, Coil Float Repair, Unit Cleaning)
Network maintenance (exterior cleaning. ATT (SW type) contact cleaning, there is one place forgetting solder fix. Frequency characteristic measurement check (~42kHz) was performed, and the capacitor for one side LF was degraded, so this only used stock TANNOY original capacitor was replaced (not the same as the production time) (Equivalent to the original) I/O waveform and balance check, sound output check)
Accessories: None
Main Specifications: Unit Caliber 38cm Unit Monitor Gold 15inch Coaxial 2-Way Playback Frequency Band 23-20,000 Hz Input Impedance 8Ω Crossover Frequency 1,000Hz Approx. W990 × H1,160×D654mm
Interior and exterior have been restored! A late model incorporating Alnico magnet 075/376/LE15A. This model was born for the first time as a stereo JBL speaker at that time. It was an epoch-making speaker at the time, transmitting stereo sound over a wide range via a reflector. The vintage design full of personality is still a gem that enthusiasts covet today. Network maintenance is also performed, so you can enjoy the original excellent sound quality of PARAGON. The exterior has been maintained and finished beautifully. Serial 2090 (Satoshi Yonejima)
Maintenance Information: 2022.4.25 Maintained (enclosure cleaning. Terminal pickling, cleaning, insulating bushings & mounting screws replacement ATT brand new replacement Frequency characteristic measurement check (~ 42 kHz) was performed and the original capacitor was continued to be used for good results. Check input/output waveform and balance, and check sound output. Woofer maintenance (edge damper replacement, cone paper coating) Driver maintenance (magnetic circuit rust removal, gap cleaning, center adjustment, sound absorbing material replacement, screw replacement, terminal, etc. Contact cleaning ) Tweeter maintenance (horn disassembly/polishing, magnetic circuit gap cleaning, screw replacement, terminal etc. contact cleaning, TW window fabric replacement) exterior repair, polishing, oil finishing. Front load, rear baffle, bottom, joint surface, reflector back, 4 legs, and other metal parts painted, adjuster polished, horn painted. TW window fabric reupholstery (Unit and each part attachment/detachment)
Accessories: No accessories
Main specifications: 3-way 3-speaker all-Alnico unit LE15A+376+075 network LX5+N7000 crossover 500Hz/7,000Hz W2,640 × H902 × D740mm total weight approx. 200kg
Paragon, a speaker system representing JBL designed by Arnold Wolff, is now in stock. Mid-term model incorporating Alnico Magnets 075, 375, and LE15A. The oiled walnut cabinet was re-polished and finished with oil, and surface damage was repaired and refreshed as much as possible. The capacitors in the network circuit are in good condition, making use of the original ones. The structure was revolutionary at the time, transmitting stereo sound over a wide area via a reflector. The majestic design and sound quality are excellent, and history and dignity are conveyed. Although there is a slight sense of aging, the overall finish is beautiful due to maintenance. ※The dowels at the main body joint are broken in 2 places (Yamato Yuki)
Maintenance information: 2024.2.22 maintained (exterior repair/polishing/oil finish, front load, rear baffle, bottom, connecting surface, back of reflector, 4 legs, other metal parts coating, adjuster polishing/fastener polish, horn paint, TW window saran replacement
Woofer terminal cleaning driver maintenance (magnetic circuit gap cleaning/center adjustment, sound absorbing material replacement, screw replacement, terminal etc. Contact cleaning, single-sided voice coil deformation correction/gap correction/disconnection repair, exterior painting)
Tweeter maintenance (magnetic circuit gap cleaning/center adjustment, terminal contact cleaning, exterior painting)
Unit detachment network maintenance: frequency characteristic check, ATT cleaning, terminal cleaning, main unit 5 cleaning/touch repair/character polishing)
Accessories: none
Main specifications: 3-way 3-speaker all-Alnico unit LE15A+375+075 network LX5+N7000 crossover 500 Hz/7000 Hz W2634 x H892 x D770 mm (measured value) total weight approx. 266 kg
A mid-term model of the Paragon, a speaker system representing JBL designed by Arnold Wolff. The oiled walnut cabinet has been repolished and oiled, and surface damage has also been repaired and refreshed as much as possible. The capacitors in the network circuit are in good condition, making use of the original. The structure was revolutionary at the time, where stereo sound was transmitted over a wide range via a reflector. The majestic design and sound quality are excellent, and the history and dignity are conveyed. ※The overall surface is clean due to maintenance, but there is color unevenness on the top plate (Yamato Yuki)
Maintenance information: 2022.12.15 operation confirmed (good sound output)
2018.9.13 Maintained (network circuit output terminal cleaning, insulating bushing & mounting screw replacement, input terminal replaced with banana plug compatible product, ATT (SW type) cleaning/LE15A woofer edge replacement, screw replacement, terminal cleaning, contact cleaning/375 driver magnetic circuit slit cleaning, center adjustment, diaphragm cleaning, sound absorbing material replacement, screw replacement, screw replacement, terminal cleaning, contact cleaning, contact cleaning, contact cleaning, 075 tweeter magnetic circuit slit interior cleaning, center adjustment, diaphragm cleaning, screw replacement, terminal cleaning, contact cleaning/cabinet exterior repair, polishing, oil finish, front load baffles, rear baffles, bottom, interior, rear legs, top plate bracket paint, etc., adjuster polishing, TW window saran replacement, horn front painting)
Accessories: none
Main Specifications: D44000 (Medium) All Alnico Unit Low Range 38cm Cone Type LE15A Middle Range Horn Type 375+H5038P High Range Horn Type 075 Network LX5+N7000 Crossover 500Hz/7000Hz Impedance 8Ω Output Sound Pressure Level 96dB Allowable Input 125W Size W2640 x H902 x D740 mm Weight Approx. 300 kg
B&W 50th Anniversary Model 800D3 Rose Nut Specification While having the characteristics of the D3 series, there is also a technology introduced only to the 800D3, an innovative model that boasts the highest performance in the company's lineup. The clear, natural sound without any taste makes you forget the speaker's existence. Serial 0001413/0001414 (Shota Sasaki)
Maintenance information: 2021.10.2 Sound operation confirmed
Accessories: commentary, jumper cable, spike base
Main Specifications: 3Way Bass Ref Type Drive Unit/25mm Diamond Dome Tweeter, 150mm Container Cone Midrange, 250mm Aerofoil Cone Base Unit Frequency Characteristic 13Hz to 45kHz Impedance 8Ω (Minimum 3Ω) Efficiency 90dB/2.83V/m W413 × H1217 × D611mm 96kg
Disposal prices have been reduced. Member prices are not applicable. 2022/11/20 sales price 5,980,000 yen First arrival at Hi-Fi! A super-grade speaker system that combines Epilogue 1 and 2 in a dedicated stand. I tried playing it with the TELOS 2500 and MIMESIS 24ME, which arrived at the same time, and it is no exaggeration to say that the vast scale, glossy and precise treble, and bass without sound blur with an oversized sense of volume will satisfy the hearts of all those who listen to it. Female vocals in particular are a must-listen. There is a big scratch on the bottom of Epilogue 2 (Sasaki Shota)
Maintenance information: 2022.11.20 good sweep test
Accessories: dedicated rack, manual (English), connection cable (LINEAL SP CABLE 1.0m x 2)
Main specifications: 3-way 4 speaker W400 × H1200 × D800 mm (actual measurement including all)