In January 2023, both the interior and exterior were maintained and brushed up! ORIGINAL LANSALOY EDGE! The OLYMPUS S8R representing JBL has arrived. The 075 tweeter is full of realism, with the sound of a driver blowing fire into the thick, dry low frequencies, and a sense of realism that leaves graininess. You can enjoy the real thrill of vintage audio. Outside of the exterior, the back plate on one side is missing, and the finish is beautiful due to maintenance (Kobayashi Hitoshi)
Maintenance information: 2023.1.10 maintenance (exterior repair, polishing, baffle/hakama repair before and after oil finishing, painting, lattice repair, polishing, painting, lining replacement. Woofer maintenance (edge softening treatment, corn paper coating, passive corn paper coating). Driver maintenance (magnetic circuit rust removal/gap cleaning/center adjustment, sound-absorbing material replacement, terminal contact cleaning). Tweeter maintenance (horn disassembly/polishing, magnetic circuit rust removal/gap cleaning, terminal contact cleaning). Network maintenance (LX5: terminal rust removal, acid washing, insulation bush & mounting screw replacement. ATT (SW type) disassembly contact polishing and cleaning. Reinforced with silicone to prevent the coil from coming off A frequency characteristic measurement check (~ 42 kHz) was performed, and the original capacitor was continuously used because the results were good. Check the input/output waveform and balance, and check the sound output. N7000 terminal rust removal, acid cleaning, insulation bush, and mounting screw replacement. ATT replacement with a brand new one. A frequency characteristic measurement check (~ 42 kHz) was performed, and the original capacitor was continuously used because the results were good. Check input/output waveform and balance, check sound output))
Accessories: saran net, diffuser, instruction manual
Main specifications: 3-way 3-speaker passive radiator system low range unit 38cm cone type (LE15A) mid range unit horn type (375) high range unit (075) passive radiator 38cm cone type (PR15) network LX5/N7000 sound pressure level 95dB allowable input 125W dimensions W1020 x H670 x D510 mm weight 82 kg
The price has been reduced. 2024/5/5 sales price 21,800 yen ※6 month warranty. Although it is a small size close to ZENSOR PICO, the sound image expression and good response that do not make you feel a sense of size are perfect for current trending sounds. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.5 operation confirmed
Accessories: saran net
Main specifications: 2 way 6Ω 83dB W140 × H237 × D195 mm 2.6 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/5/6 sales price 150,000 yen This is a focused overseas model headphone amplifier. Operation has been confirmed in a 100V environment. The neutral sound is simple, uncomplicated, natural, and comfortable to listen to. The interface is also rich and easy to use. Serial 3020886-V1-001308 (Fujisawa Yukishi)
Maintenance information: 2024.5.6 operation confirmed
Accessories: instruction manual (English), power cord, original box, headphone stand
Main specifications: 10 Hz to 100 kHz 32 ohm to 1 kΩ 116 dB W200 × H64 × D297 mm 4.65 kg
The price has been reduced! 2024/5/20 sales price 29,800 yen ※1 top plate screw lid is missing. ADK 3-tier rack It is a system upgrade type natural wood audio rack that allows units to be stacked one after another as the number of devices increases. The exterior has a feeling of use such as dullness and small scratches (Hiroki Aso)
Accessories: none
Main specifications: W574 x H635 x D500 mm first stage space H250 mm second stage space H230 mm weight 26.7 kg
The price has been reduced! 2024/5/20 sales price 8,800 yen power cable 1.5m 2P-3P specification PSE standard product 6ncu+OFC new hybrid 2-core conductor Although it is the company's entry model, it is a long-selling power cable with low noise, stable sound, and high C/P (Hiroki Aso)
Maintenance information: 2024.5.20 continuity confirmed
Accessories: original box
The price has been reduced! 2024/5/25 sales price 250,000 yen power amplifier with dual monaural configuration. This model has a small output yet has driving power, and since the signal path has been shortened, it makes you feel more powerful than the specs. You can fully enjoy the sound, intensity, and thickness unique to Levinson at an affordable price. There is a feeling of use on the exterior, such as dullness and small scratches. Serial 1520 (Hiroki Aso)
Maintenance information: 2024.5.20 sound output confirmed
Accessories: copy of instruction manual Remo pin power cable (general purpose product)
Main specifications: 50W+50W (8Ω) 100W+100W (4Ω) 200W (8Ω MONO) input sensitivity/impedance 1V/50kΩ (balanced/unbalanced) W483 × H175 × D370 mm 19 kg
The price has been reduced. 2023/8/29 sales price 24,800 yen The stylus is good, but it's cheap because the cantilever is curved. A mono cartridge with a traditional 33 series body. Play mono records clearly with horizontal pickup only. It has vertical compliance and is optimized for recurrent mono discs from the stereocar era. You can feel that the range is wider than Denon's DL-102 (Fujisawa Yukishi)
Maintenance information: 2023.8.29 Operation confirmed
Accessories: needle cover
Main specifications: MC type needle pressure 2.3 to 2.7 g (2.5 g standard) Muku round needle high hardness duralumin cantilever PCOCC coil anti-vibration rubber “Honeynight” impedance 10 Ω 6.9 g
Fully maintained! The 38 series is the most popular 38FD. It has a warm tone with a warm tone, and there is plenty of warmth in the bass and mids, so you can enjoy the true essence of lackstone where you can enjoy the afterglow of the tone. There is slight rust on the back, but there are no major scratches other than that (Oikawa Tetsuji)
Maintenance information: 2024.5.22 maintained (solder correction, input/output waveform confirmation, load test (1kHz sine wave, at 8Ω load: 27W+27W), sound output test)
2023.12.17 Maintained (oil capacitor, block capacitor, electrolytic capacitor, film capacitor, fixed resistor, rectifier diode, DIN terminal, power supply SW, monitor SW, master VR, balance VR, rear panel VR, VR, rear panel VR replacement, RCA terminal polishing, lever SW disassembly and cleaning and application of grease to prevent oxidation and sulfation, replacement of 2 vacuum tube main parts, 50CA10 replacement, cabinet exterior repair/polishing/oil finish, input/output waveform Check, check for residual noise,
Load test (1 kHz sine wave, 27W+27W at 8 ohm load), sound output test)
Accessories: power cable, instruction manual
Main specifications: 30W+30W (4, 8, 16 ohms) line input 4 systems phono 2 systems (mm) W476 x H190 x D335 mm 18 kg
Exclusive audio rack made of wood fiber plywood and metal posts, with casters. The sturdy construction typical of TAOC is attractive. It is a rack where you can aim for stable sound quality without coloring. The effective height is 180 mm for the upper and middle steps and 230 mm for the lower tier. There are wounds, stains, abrasions, etc. (Oikawa Tetsuji)
Accessories: none
Main specifications: load capacity 1 stage 100 kg W600 x H835 x D550 mm 27 kg
Set of 4 Quadraspires VENT black poles How about for an addition or replacement? There is some paint peeling on the exterior (Tamura Eiji)
Accessories: none
*The 2-tier rack decoupler spike holder is not included. You can see the attention to design and sound quality at a high level, such as slits that have been carefully thought out for heat dissipation effects and resonance, and solid aluminum pillars. There are some threads and bumps on the exterior (Tamura Eiji)
Accessories: none
Main specifications: W597 x H455 x D475 mm between shelves 326 mm
Luxpremain entry model. You can enjoy solid LUXMAN sound at an affordable price. We recommend combining it with European speakers that are glossy, soft, and have a good tone. The exterior is dull and there are abrasions and small scratches on the top plate. Serial M90410348A (Yonejima Satoshi)
Maintenance information: 2024.5.22 operation confirmed
Accessories: remote control, instruction manual, power cord
Main specifications: 70W+70W (8Ω) line input 4 systems (RCA x 4, XLR x 1), 1 phono system (MM), 2 tape systems W467 x H151 x D439 mm 13 kg
This is a double arm cabinet DK-2300 ideal for DP-80 and DP-75. The arm board can be easily removed with screws. One side of the armhole appears to be for the SME3012. Compatible models are unknown on the other side, and there is a 30mm diameter hole. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: insulated 70mm laminated plywood twin arm specification W600 x H101 x D 500 mm weight approx. 15 kg
An ultra-high purity 6nCu with a digital RCA cable 1.0m pure silver coating is used as a single wire. Double shield structure with soft copper wire braids layered on top of aluminum PET tape. A two-layer sheath structure that controls unnecessary vibrations by covering the outer circumference of the shield with a RoHS-compatible PVC sheath. The exterior is generally beautiful with no conspicuous scratches (Tamai Jun)
Maintenance information: 2024.5.20 continuity confirmed
Accessories: original box
RCA cable 1.0m pair oxygen-free copper OFC Ritz wire 2-core shield plug, standard AccuPhase line cable with gold plating. The sound is more gorgeous than the L-10. There are dullness and scratches around the plug, and abrasions on the sheath (Kojima Yosuke)
Accessories: none
※1 bottle only. Super tweeter using an aluminum alloy thick cylindrical horn and an ultra-lightweight ring diaphragm. It expands the well-stretched, clean high frequency range. There are small scratches and dullness on the exterior. (YONEJIMA Satoshi)
Maintenance information: 2024.5.8 oscillator check is good
Accessories: pedestal, instruction manual
Main specifications: Alnico magnet, 8Ω, playback frequency band, 5kHz to 35kHz, output sound pressure level, 106dB, recommended crossover, 7kHz or higher, input 50W, 800g/book
Self-made 4ch power amplifier using 4 Flying Mall digital power amplifiers DAD-M1. The construction is solid, and the sound is high resolution, just like a flying mall. Recommended for those who want to save space and use it for multiple purposes. The exterior has a feeling of use such as dullness and small scratches (Hiroki Aso)
Maintenance information: 2024.5.20 sound output confirmed
Accessories: power cable
Main specifications: DAD-M1 rated output 160W/4Ω 100W/8Ω frequency characteristics DC to 25kHz/4Ω DC to 50kHz/8Ω S/N ratio 120dB overall size W270 × H162 × D290 mm weight 6 kg (actual measurement)
The disposal price has been reduced. Member discounts are not applicable. 2023/4/2 sales price 250,000 yen ※We have newly created head amplifier modules ✕ 2, Phono equalizer modules x 2, and flat modules x 2. Maintained! This is a control amplifier from Sony's high-end brand, the Esprit series. Straight Sony sound with a sense of speed similar to the TA-E900. I want to use the look and sound in combination with the company's Power TA-N902. The exterior has small scratches and is dull. Serial 200499 (Takasaki Atsushi)
Maintenance information: 2023.4.2 Maintained (2 flat modules replaced. Check the input/output waveform, check the left and right balance, and connect a power amplifier to perform a comprehensive operation test.)
2023.1.5 Maintained (Phono equalizer module x 2 replaced. Check the input/output waveform, check the left and right balance, and connect a power amplifier to perform a comprehensive operation test.)
2022.8.31 Maintained (head amplifier module ✕ 2, capacitor, semi-fixed resistor, relay, LED, lamp, Capcom, power cord replacement. All SW, VR disassembly and cleaning. Re-solder the deteriorated part of the solder surface of the board. Check the input/output waveform, check the left and right balance, and perform a comprehensive operation test by connecting a power amplifier.)
Accessories: copy of instruction manual
Main specifications: 2 phono inputs, 5 line inputs, 2 pre-out systems, W480 x H105 x D465 mm, 12.5 kg
Maintenance was carried out, including the replacement of internal deteriorated capacitors! This is Marantz's masterpiece power amplifier model 5, which has not arrived in a long time. Not only is the range unbelievably wide when viewed from the year it was released, but the excellent driving power and glossy tone are truly a masterpiece with a high reputation. There are scratches and paint peeling on the exterior. Serial 1017/1024 (Fujisawa Yukishi)
Maintenance information: 2024.5.21 Maintained (AC cord film deterioration → rewiring procedure. ◎ Common · 1 x 2 inch nuts added for bottom legs (please be careful when opening the back side) · 20 μF or other deterioration replacement and additional 4 x 2 · selenium deterioration → diode addition, BIAS and AC BAL readjustment, vacuum tube socket and RCA jack caulking repair. *Other operation checks have been performed (measured at 30 to 41 W SP: 8 Ω at rated output AC 100 to 117 V)
Accessories: No accessories
Main specifications: mono tube power amplifier output 30W (UL connection) EL34 push pull W152 x H186 x D378 mm 13.4 kg
Network attenuator pair sale inductance 0-2.7-3.4-3.6-3.9-4.7mH allowable input 400W W105 x H92 x 76 mm 1.9 kg/piece with original box (Kojima Yosuke)
Accessories: original box
Maintained. 300B single amplifier using all Tamura transformers. It is a configuration that firmly holds the basics of a single amplifier using a rectifier tube. Furthermore, you can use it safely with 300B DC ignition with a regulator (Oikawa Tetsuji)
Maintenance information: 2024.5.21 maintained (2 main volume gang error replacements, CV378/GZ37 deterioration replacement, RCA jack and vacuum tube socket caulking repair*Other operation checked with AC100V (rated output measured at 8W SP: 8Ω))
Accessories: none
Main specifications: used vacuum tube 300B 6SL7/GZ37/5U4G/5X4G output 7W x 2 W430 x D215 x H210 mm 19 kg
A long-selling Technica model that includes a shell and cartridge. The sound quality is clear and bright, and it makes popular music in general bouncy. The exterior has a feeling of use such as dullness (Jun Tamai)
Maintenance information: 2024.5.21 sound output confirmed
Accessories: original box
Main specifications: VM type playback frequency band 20 to 20,000 Hz output voltage 5 mV needle pressure 1.5 to 2.5 g H26 x W36 x D67.5 mm dead weight 19.5 g (including shell)
The price has been reduced! 2024/5/20 sales price 148,000 yen JBL large horn set 2360H and 2360T. It's perfect for those who want to experience the intense and open sound of a horn. A self-made mounting stand is also included, so you can quickly attach it to the enclosure. In addition to dullness and small scratches on the exterior, there is a feeling of use such as peeling paint (Hiroki Aso)
Accessories: self-made stand
Main specifications: 2360H 2 inch driver radial horn recommended crossover 500 Hz overall size W792 x H786 x D894 mm weight 18.2 kg (actual measurement)
The price has been drastically reduced! 2024/5/13 sales price 108,000 yen Speaker from Taiwanese manufacturer Usher Audio with a unique design. The mid to high frequencies are delicate and stretchy, and the low frequencies have an attractive, bouncy, and tense sound. It is a model that works very well with current pop and piano sounds when played clearly with a powerful amplifier. There is a feeling of use on the exterior such as small scratches and dullness (Asaine Tomoho)
Maintenance information: 2024.5.13 operation confirmed
Accessories: Saran net spike spike receiving jumper plate
Main specifications: 3-way 3-speaker bi-wire specification 8Ω 87dB 25Hz to 28,000 Hz W350 x H1250 x D650 mm 58.2 kg
Self-made 4ch power amplifier using 4 Flying Mall digital power amplifiers DAD-M1. The construction is solid, and the sound is high resolution, just like a flying mall. Recommended for those who want to save space and use it for multiple purposes. The exterior has a feeling of use such as dullness and small scratches (Hiroki Aso)
Maintenance information: 2024.5.20 sound output confirmed
Accessories: power cable
Main specifications: DAD-M1 rated output 160W/4Ω 100W/8Ω frequency characteristics DC to 25kHz/4Ω DC to 50kHz/8Ω S/N ratio 120dB overall size W270 × H162 × D290 mm weight 6 kg (actual measurement)
The price has been reduced! 2024/5/19 sales price 478,000 yen A digital processor that inherits DP-720 technology. ES9018 manufactured by ESS Technology is operated in parallel. It is especially recommended for Accuphase CD players and transports. The SN is good, the sound has good visibility, and is excellent compatibility with high resolution and PC audio. The exterior is generally beautiful, although there are small scratches on the top plate. Serial A5Y134 (Yamato Yuki)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: instruction manual power cable
Main specifications: digital input HS-Link x 1 coaxial x 2 TOS link x 2 USB x 1 XLR x 1 USB 5.6448 MHz (1 bit 2 ch DSD) 384 kHz (32 bit 2 ch PCM) high resolution compatible dimensions W465 x H114 x D385 mm weight 14.4 kg
RCA cable 2.0m pair LC-OFC Class 1 is a long-selling product capable of pure signal transmission that has been produced for over 10 years. The balance is impressive with flat, tight bass and smooth high-frequency luster. The exterior is dull and has a feeling of use (Hiroki Aso)
Maintenance information: 2024.5.20 continuity confirmed
Accessories: none
It has been fully maintained with attention to detail, from exterior painting to gap cleaning! This is a 612C monitor speaker with a refined masterpiece 612A system. The unit is an early model 604-8G. The thick, unsluggish tone centered around the middle range is perfect for vocals. Since localization is also precisely determined, it is a practical and easy-to-use speaker (Murakoshi Yoichi)
Maintenance information: 2024.5.14 maintenance (exterior painting, new saran net replacement, unit maintenance (magnetic circuit rust removal in both low and high ranges, in-gap cleaning, center adjustment, terminal contact cleaning) network maintenance (frequency characteristic check, ATT cleaning, terminal contact cleaning) unit detachment, terminal replacement, new wiring)
Accessories: saran net
Main specifications: coaxial 2-way speaker unit 38cm coaxial impedance 8Ω 104dB crossover frequency 1.5kHz W648 × H749 × D509 mm 54.5 kg
1 set of 4 Y rugs It is a screw-tightened metal Y lug terminal that can be easily fixed and is compatible with various core wire diameters and terminal diameters. There is dullness (Mizushima Itsuro)
Accessories: none
Main specifications: core wire strand diameter 1.5 to 4.0 mm, terminal diameter up to 6.0 mm
RCA relay plug Monolaural mono pair. Uses a metal body. You can see the exterior, disappearing characters, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
Limited edition model commemorating the 50th anniversary of the release of the SL-1200 series. Beige color type. It is a 50th anniversary design that keeps the basic performance of the SL-1200MK7, has a gold tone arm in 7 color variations, and a plate with the “50th Anniversary” inscription and serial number engraved on it. With the main unit switch, 78 rotations and reverse rotation playback are also possible. The dust cover hinges are not original. Serial GM2JA001051 (Tomonori Asaine)
Maintenance information: 2024.5.18 Operation confirmed
Accessories: manual, power cord, phono cable+earth wire, original box, slip mat, dust cover
Main specifications: 33/45 rotations (78 rotations are set with a changeover switch) universal S-shaped tone arm static balance type applicable cartridge mass 5.6 g to 12.0 g/14.3 g to 20.7 g (including headshell) W453 x H169 x D353 mm approx. 9.6 kg
ELAC's classic MM cartridges. The tone spun out of the gold body is a firm tone, and you can enjoy the subtle high frequencies and the warm MM-like thickness (Murakoshi Yoichi)
Maintenance information: 2024.5.10 sound output confirmed
Accessories: none
Main specifications: mm type output 5.5 mV playback frequency band 10 Hz to 25,000 Hz needle pressure 0.75 to 1.5 g dead weight 6.5 g
The price has been reduced! 2024/5/16 sales price 35,000 yen This is a headphone amplifier with separate power supply with preamp function. Genuine Naspec It is compatible with most commercially available headphones, and high sound quality playback is possible even with inner-earphones or authentic stereo headphones. There are small scratches and dullness on the exterior. Serial KRHQ1200069/KRHQP120069 (Yonejima Satoshi)
Maintenance information: 2024.5.16 Operation confirmed
Accessories: power cord, connection cord
Main Specifications: Dynamic Range 110dB SNR 115dB Output Impedance 8Ω Body: W185 x D175 x 53mm 1.0 kg Power Supply Unit: H185 x D150 x H53 mm 1.7 kg
The price has been reduced! 2024/5/14 selling price 29,800 yen British Celestion F series tall boy speaker. It can be used for a wide range of purposes, from AV systems to pure audio. It is a bright tone with a pleasant drop and spread of the midrange. There is no effect on operation, but there is a dent in the mid-range center dome on one side. (FUJISAWA KOSHI)
Maintenance information: 2024.5.14 Operation confirmed
Accessories: instruction manual (English characters), saran net, spikes, jumper plates
Main specifications: 3-way bass reflex type output sound pressure level: 90db 8Ω W264 × H920 × D342 mm 20 kg
Digital cable 1.0 m RCA plug This 75 ohm digital cable is ideal for generating clocks such as clock generators, word clock connections for receiving devices, S/PDIF connections to DACs, audio interfaces, DJ devices, etc., and video equipment. The exterior is dull (Fujisawa Yukishi)
Maintenance information: 2024.5.20 continuity confirmed
Accessories: original bag
It is a DIGIMASTER X64.4 linked to the famous 2000SH4 series. The thick, elastic sound unique to WADIA's heyday is attractive. It is a high-end aircraft of the time with high musicality, and also has intense colors. The exterior is dull. The exterior has scratches, etc. Genuine AXISS Serial 1 2011-90 (Yonejima Satoshi)
Maintenance information: 2024.5.18 Operation confirmed
Accessories: copy of instruction manual, power cable, connection cord
Main Specifications: Sledgehammer Buffer Drive Resampling Rate 64X Resolution 18 Bits CPU Power 72 MIPS Sampling Frequency 32/44.1/48kHz Input: 2 Coaxial (BNC) Systems, 2 Optical Systems Output: 1 Unbalanced (RCA) System, 1 Balance (XLR) System W486 x H89 x D381 mm Weight 12 kg
All internal deteriorated capacitors and parts have been replaced! Furthermore, a new dust cover has also been created so you can use it comfortably. A masterpiece model of a semi-auto player. The torque and braking power of the motor are excellent, and the stability of operation is impressive. The sound quality, which is delicate and has an excellent sense of resolution, brings out the performance of the cartridge well. There are thin threads on the exterior. Serial 10700499 (Yonejima Satoshi)
Maintenance information: 2024.2.29 Maintained (new dust cover created, motor part removed, shaft and bearing cleaned and lubricated. The tact SW on the operation part and the electrolytic capacitor on the internal board were replaced with a new one. Resolder the board. Remove the area around the arm, clean each part after disassembly, replace the shaft bearing, inspect the internal lead wire, and reassemble. Dust cover hinge reinforcement bracket created. Exterior cleaning, cabinet scratch polishing, rotation speed check, operation test of each part, sound test)
Accessories: instruction manual, screws, EP adapter
Main Specifications: Quartz Lock DD Drive Auto Lift Up Static Balance Type Compatible Cartridge Weight 2 to 12 g Needle Pressure Range 0 to 3 g W490 x H182 x D410 mm 14.5 kg
The SINTRA series, which is Lloyd's hidden masterpiece, and the rare SINTRA IMPROVED have arrived. Using a dome tweeter jointly developed with SCAN SPEAK, a uniquely designed bass reflex port reproduces clear sound with reduced resonance. The sound absorbing material around the tweeter is peeling off, there are small scratches, and dents (Daiki Goto)
Maintenance information: 2024.5.18 Operation confirmed
Accessories: original box
Main specifications: 2 way 2 speakers, 8 ohms, W305 x H203 x D190 mm, weight 7.8 kg (actual measurement)
Maintained in December 2020! DYNACO's tubular mono power amplifiers are highly popular. The sleek, straight, and energetic sound that comes out of the small body is attractive. Combinations with Altech and JBL are a staple, and they make jazz and rock sounds powerful and full of realism. There is discoloration and dullness on both channel bottom plates (Sasaki Shota)
Maintenance information: 2020.12.25 maintenance (6AN8 replacement on one side. Common block capacitor 30/20/20 μF replacement. Replace 1 x 2 film capacitors with 0.1 μF or other oil capacitors. Replace 3 x 2 Mylar capacitors with 390pF. 1 x 2 Vacuum Tube Socket and RCA Jack Caulking Repair (Other rated output: 36 to 55 W at AC 100 to 117 V, measured at SP: 8 Ω, operation check)
Accessories: none
Main specifications: tubular mono power amplifier using vacuum tube 6550/5AR4/6AN8A output 60W/140W W229 x H190 x D229 mm 11.5 kg/unit
Unopened brand new (opened for photography) arm lifters that can smoothly operate tone arms without lifters, such as the RMG309i and RMG212i orthophone. Can also be used on the company's old models with a rotating shaft diameter of 20 mmφand RMA types for A shells (Oikawa Tetsuji)
Accessories: original box
Brand new and unused item (opened for photography) A slide base that allows you to use an orthophone's RMG/RMA etc. arm by using it in a hole for the SME 3009 or 3012. The shaft diameter is 20mm (Oikawa Tetsuji)
Accessories: screws, tools
Speaker cable 1.9 m pair end unprocessed double 4-core spiral hyperlitz speaker cable conductor is a blend of PSC plus & LGC. It is an excellent model that combines realism with thickness not found in recent audio quests (Mizusaki Ryo)
Maintenance information: 2024.5.20 continuity confirmed
Accessories: none
Speaker cable is a basic cable composed of 4 single-wire conductors with 2.6 m pairs of untreated ends. It has a straight, extruded, and pleasant sound. There is dirt on the sheath on the exterior (Ryo Mizusaki)
Maintenance information: 2024.5.20 continuity confirmed
Accessories: none
※Since it has been replaced with an external plug, it is inexpensive. RCA cable, 0.7 m pair, LC-OFC class 1 conductor, has been produced for over 10 years, and is a long-selling product that can transmit pure signals. The balance is an indescribable cable with flat, tight bass and a smooth high-frequency luster. It rubs against the sheath and is dirty (Mizusaki Ryo)
Maintenance information: 2024.5.20 continuity confirmed
Accessories: none
1.3 m power cable with clear and wide range sound at an affordable price. If you want to replace the power cable, how about starting with this model? (SASAKI Shota)
Accessories: none
The 1.0 m XLR terminal of the digital cable uses 7N copper for both 110Ω AES/EBU core wire and shielded braided wire. Connectors are manufactured by Neutrik (Mizusaki Ryo)
Maintenance information: 2024.5.20 continuity confirmed
Accessories: none
The 1.0 m XLR terminal of the digital cable uses 7N copper for both 110Ω AES/EBU core wire and shielded braided wire. Connectors are manufactured by Neutrik (Mizusaki Ryo)
Maintenance information: 2024.5.20 continuity confirmed
Accessories: none