The bass reflex enclosure in which the JBL LE8T and 2405H were mounted. A saran net is also attached, and it is relatively carefully built. There is a feeling of use such as rubbing and small scratches (Itsuro Mizushima)
Accessories: saran net
Main specifications: W338 × H590 × D345 mm 11 kg
Enclosures for drivers and tweeters. In combination with the EC-20, it is possible to joint horn drivers, tweeters, etc. The terminals have been changed to be compatible with bananas. The exterior has corner chips, dirt, and some dowels are broken. *Saran net is not included. (Tamura Eiji)
Accessories: none
Main specifications: MID screw pitch 140mm Tweeter screw pitch 108mm W500 × H260 × D380mm Weight 11kg
Popular lattice enclosure. Baffles have been modified for double units. You can double your favorite unit, or you can enjoy it depending on your idea even if you close it with a mekra board to make a full range configuration. There are small scratches, dullness, feeling of use on the whole (Yoichi Murakoshi)
Accessories: none
Main specifications: opening 50mm, 175mm × 2 diagonal screw pitch hole large 293mm, hole small 65mm W326 × H503 × D248 mm 6.5 kg
Originally, it was used as a dedicated enclosure for the PE-16m, a reprinted version of the 16cm full-range unit adapted to the broadcasting technology standard of the Japan Broadcasting Corporation, but it was connected because the front baffle was replaced The unit is unknown. You can see white stains and small scratches that cannot be removed from the exterior (Hitoshi Kobayashi)
Accessories: Saran net
Main specifications: Unit mounting hole diameter 146mm screw center to screw center length 158mm bass reflex port diameter 80mm W300 × H500 × D270mm 8.5kg
It is an enclosure for drivers and tweeters. Combined with EC-20, it is possible to joint horn drivers, tweeters, etc. The appearance has scratches, dullness, and stains (Hiura Katsuji)
Accessories: Instruction manual, saran net, bass reflex port large/small, mechanical board, SP terminal
Main specifications: MID screw pitch 140mm tweeter screw pitch 108mm W500 × H260 × D380mm Weight 11kg
I cut the price. 2021/9/12 Selling price 25,000 yen SANSUI driver, tweeter box EC-12. There were actually H91 and LE85 and 075 mounted. There is also a hole for the network LX5 and N7000, please try if you are thinking of 3 way by all means Appearance paint peeling and scratches will be scattered (Hirotsugu Kondo)
Accessories: saran net
Main specifications: W590 × H280 × D470mm 12kg
Self-made backload horn type enclosure for 10cm units. There are several large scratches (Kanai Hidetsugu)
Accessories: screws
Main specifications: W196 x H450 x D300 mm Unit mounting opening φ100 mm Diagonal screw pitch 115 mm Weight approx. 5 kg (actual measurement)
A 20cm enclosure that seems to be a garage item. The 755E by ALTEC was mounted. It's carefully made (Itsuro Mizushima)
Accessories: none
Main specifications: Unit opening diameter 180mm Screw diagonal 195mm W300 × H510 × D235 mm