※It is inexpensive because there are many scratches. Maintained by Taiyo International. This time it comes with a special battery BPS-2. Geoff Roland's peak stereo power amplifier. Genuine Oba Shoji product. A thorough non-resonance design using the company's traditional hard aluminum material. The high range with a sense of transparency and sharpness, the mid and low range with a sense of speed and driving power, and a vivid and satisfying sound are attractive. The exterior has scratches, line scratches, and dirt marks (Ryo Mizusaki)
Maintenance information: 2024.5.2 manufacturer maintained (BPS-2: internal cleaning, battery replacement, inspection of various parts, operation inspection. (Model2: Inspection of each part, characteristic inspection, running test)
Accessories: power cord, connection cable
Main specifications: 75W+75W (8Ω) with GAIN26/32dB changeover switch input impedance with HIGH/LOW changeover switch W445 × H133 × D362mm 21kg BPS-2: W445 × H133 × D362 mm weight 22 kg
Full maintenance from each unit to network and exterior! This is a 4343BWX with blue baffles and walnut specifications. The instantaneous power, sharp treble, volume and dynamism of the bass are outstanding. It's one step ahead of current speakers in terms of localization, but it's rare to find a speaker that makes on-mic recordings of all ages sound better than this. It has a beautiful finish due to exterior maintenance (Oikawa Tetsuji)
Maintenance information: 2024.5.27 Maintained (exterior repair/polishing/oil finish baffle repair/paint saran net repair/frame repair: edge replacement, cone paper coating, in-gap cleaning/center adjustment midmaintenance: edge replacement/cone paper coating driver maintenance: magnetic circuit rust removal/gap cleaning/center adjustment, sound absorbing material replacement, terminal cleaning/screw replacement Tweeter maintenance: magnetic circuit rust removal/gap cleaning, terminal cleaning/screw replacement network maintenance: frequency characteristic check, ATT/switching SW cleaning, partial defective resistance/capacitor replacement unit detachment/diffuser repair)
Accessories: none
Main specifications: 4-way monitor speaker bass reflex playback frequency band 35 Hz to 20 kHz (+- 3 dB) crossover frequency 300 Hz/1250 Hz/9500 Hz impedance 8 Ω output sound pressure level 93 dB dimensions W635 x H1,051 x D435 mm weight 83.9 kg
*Currently sold. A small Yamaha speaker with a piano finish. Rich bass reproduction is achieved by deepening the depth while being small. Deep low frequencies are added to the sharp, stretchy mid-high range unique to Yamaha, so you can enjoy sound that's more than the price. There are scuffs and dents on the exterior (Hiura Katsuji)
Maintenance information: 2024.5.14 sound output confirmed
Accessories: saran net
Main specifications: output sound pressure level 85dB impedance 6Ω allowable input 40W playback frequency band 55Hz to 80kHz W154 x H274 x D287 mm weight 3.9 kg
The disposal price has been reduced! (Member discounts are not applicable) 2024/5/16 sales price 9,800 yen*Currently sold, it is cheap because it is in poor condition. This model has a nicely looking model with units arranged in the center. It has excellent sharpness from low to high frequencies, and is perfect for those who listen to pop music. There is a feeling of use on the exterior, such as dullness and small scratches. Serial 105025A 105025B (Hiroki Aso)
Maintenance information: 2024.5.16 sound output confirmed (good sweep test)
Accessories: saran net
Main specifications: low frequency 18 cm cone woofer high range 3.5 cm dome tweeter impedance 6 ohm allowable input 70W W225 x H370 x D229 mm 5.4 kg/book
The disposal price has been reduced. Member discounts are not applicable. 2024/5/17 sales price 128,000 yen ※Depending on the arm base, the mounting position of the arm is slightly close to the shaft side. Since the arm is long, please remove the dust cover for playback. Comes with SAEC arm stabilizer AS-500! A record player that is highly regarded for its smooth rotation and the effectiveness of the insulator's suspension. The WE-308 arm features a double knife edge for sharp sound and accurate sound image localization. It is a combination of LUX's smooth and quiet motor and SAEC arms that cut sharply into the sound source, so you can fully enjoy the fun and depth of analog. Additional rubber feet have been attached to the legs to prevent the AS-500E. The exterior is dull and has small scratches. Serial G8903281 (Murakoshi Yoichi)
Maintenance Information: 2020.6.2 Maintained (created with strobe circuit LED. diode installation. Electrolytic capacitor replacement. Power circuit film capacitor replacement. (Inside Force cancellation weight exchange)
Accessories: phono cable
Main specifications: PD-131 direct drive system 8 pole 24 slot brushless DC servo motor W472 x H160 x D372 mm weight 12 kg WE-308 double knife edge static balance universal type total length 329 mm effective length 240 mm overhang 5 mm needle pressure 0 to 2 g cartridge weight range: 5.5 to 12.5 g
Full maintenance on every detail, from exterior to unit maintenance and terminal cleaning! 16 ohm specification! An old JBL status model equipped with 075 and D130. The American sound, which boasts outstanding sharpness, has been restored to the present day. A vintage with very well-defined parameters, which can also be seen from the size of the enclosure. It makes me think that excellent is a word for this product (Kobayashi Hitoshi)
Maintenance information: 2024.5.25 Maintained (exterior repair/polishing/clear finish
Front and rear baffle repair, paint saran net cleaning, foot polishing
(Woofer maintenance: terminal cleaning/screw replacement tweeter maintenance: horn polishing, terminal cleaning network maintenance: frequency characteristic check, ATT cleaning, terminal/vise cleaning)
Accessories: none
Main specifications: tweeter+full range configuration unit 075 (16 ohms) +D130 (16 ohms) +N2600 W600 x H640 x D400 mm (legs included)
The disposal price has been reduced! (Member prices are not applicable) 2024/5/23 sales price 148,000 yen This is a Venere series bookshelf model designed with a sharp form, breaking away from conventional classical styles. It is a speaker with an excellent glossy, smooth high frequency, and you can enjoy a particularly beautiful sound with stringed instruments and vocals. Serial 0077513 0077513 (Yamato Yuki)
Maintenance information: 2024.5.23 Operation confirmed
Accessories: Saran net original box jumper plate
Main specifications: Wave reflex bookshelf type unit tweeter 29 mm high resolution silk soft dome woofer 180 mm cone type frequency characteristics 45 Hz to 25,000 Hz output sound pressure level 88 dB/w/m 6 ohms size W246 x H449 x D336 mm 7.0 kg (1)
This is Altech's classic 1 inch 4 sectional horn. With a 1-inch driver of your choice, such as the 802-8D, you can enjoy the horn sound unique to Altec with good sharpness. The exterior has dullness and small scratches due to aging (Yonejima Satoshi)
Main specifications: crossover 500 Hz directional horizontal 90 x vertical 40 throat diameter 250 mm W600 x H270 x D 486 mm 6.7 kg
The price has been reduced! 2024/5/26 sales price 1,080,000 yen with dedicated stand! It is packed with advanced technology such as a beautiful reverse wrap cabinet, a diamond dome tweeter, and a solid body tweeter on top, and you can hear a sound that is even sharper than the D3. There is some scuff on the exterior, but it is generally beautiful. Serial 2245-0007402-FP42161 2245-0007402-FP42161 (Tomoho Asaine)
Maintenance information: 2024.5.26 sound output confirmed
Accessories: dedicated stand, saran net jumper cable, instruction manual, foot spike
Main specifications: 2-way bass reflex type playback frequency band 34 to 35 kHz sensitivity 88 dB nominal impedance 8 ohms W240 x H440 x D373 mm 15.55 kg/book stand weight 13.4 kg (per watch)
)
Maintained! A famous instrument and the first generation preamp. The coat is different from modern tones, and the solid sharpness and punchy tone go great with vintage speakers such as JBL. The crunchy sound image and exhilarating sounds are a habit. The exterior is dull and has a feeling of use. Serial E6T080 (Hiroki Aso)
Maintenance information: 2024.5.27 Maintained (contact push switch due to poor contact with the rotary switch due to poor contact, all switches dismantling contacts polishing contacts grease coating TONE switch disassembly contacts cleaning contacts grease coating electrolytic capacitor replacement lamp replacement each input/output operation check)
Accessories: instruction manual copy power cable (general-purpose product)
Main specifications: 3 phono systems (with head amplifier), line 3 systems, tape, 3 systems, dimensions W445 x H160 x D373 mm, weight 13.4 kg
The price has been reduced! 2024/5/11 sales price 178,000 yen Maintained! A best-selling control amplifier using C-280 circuit technology based on the C-200X. You can enjoy tight low frequencies, sharp mid to high frequencies, and sharp sound. The sound image is tighter than the current Accuphase, and the straight sound is also attractive. There are exterior, dullness, and small scratches (Yonejima Satoshi)
Maintenance information: 2024.5.11 Maintained (tone switch, output switch disassembly contact cleaning contact grease application, push switch disassembly contact cleaning grease application, other switches, volume contact cleaning. Electrolytic capacitor replacement. Offset voltage regulation. (Check the operation of each input/output)
Accessories: instruction manual
Main specifications: PHONO input x 3 systems (MC, MM compatible) TAPE x 3 systems PRE OUT x 2 systems W445 x H160 x D373 mm 13.6 kg
This is an MC cartridge for Hyundai Orthophone. You can enjoy the bright, sharp sound at a low cost. I also recommend it as an introduction to orthophones (Mizusaki Ryo)
Maintenance information: 2024.5.26 sound output confirmed
Accessories: needle cover
Main specifications: MC cartridge output voltage 0.5 mV frequency band 20 Hz-25,000 Hz diamond needle aluminum cantilever suitable needle pressure 2.3 g dead weight 9 g
The price has been reduced! 2024/5/8 sales price 30,000 yen ※The exterior is in poor condition, so it's cheap. This is Altec's classic 1 inch 4-sectional horn. With a 1-inch driver of your choice, such as the 802-8D, you can enjoy the horn sound unique to Altec with good sharpness. The exterior has peeling paint and damage such as scratches and tape marks (Satoshi Yonejima)
Accessories: No accessories
Main specifications: crossover 500 Hz directional horizontal 90 x vertical 40 throat diameter 250 mm W600 x H270 x D 486 mm 6.7 kg
Maintained! The successor to the C-220, which was particular about the phono equalizer. Models from the heyday of analog are notable models that focus on records. The deep, authentic sound quality of PHONO with good sharpness is attractive. The exterior is dull and has small scratches. Serial C4X515 (Yonejima Satoshi)
Maintenance information: 2024.5.25 Maintained (contact cleaning due to poor main volume and balance volume. Due to poor contact with the compensation center switch in the sealing door, disassembly contact polishing contact grease was applied. Electrolytic capacitor replacement near the heating unit. (Check the operation of each input/output)
Accessories: power cord, copy of instruction manual
Main specifications: PHONO (MM/MC) line input 5 systems W466 x H153 x D385 mm 9.7 kg
The disposal price has been reduced! (Member discounts are not applicable) 2023/5/9 sales price 198,000 yen Maintained! This power amplifier was released around the same time as the SG620. It combines 100W+100W driving power with good sharpness. It reproduces thick sounds unique to JBL from a simple design with only a power switch on a black body. It goes well with 70' SJBL speakers and drives exhilarating. The exterior has front scratches, bends on the power switch, scratches, and repair marks on the top plate. Serial 10623 (Yamato Yuki)
Maintenance information: 2024.3.2 Maintained (timer relay installed (speaker will be turned on 5 seconds after power is turned on. (Please turn off the VOL when the power is on). Power SW bending correction (deformation of the knob itself is not compatible). Power stage Tr check. (Replacement of Tr in the board, level VOL, fuse holder, and C in the power supply board)
Accessories: power cable
Main specifications: T-type circuit adopted 100W+100W W432 ✕ H132 ✕ D355mm 19kg
Maintained by the manufacturer! A special edition model of VRDS-10. This is the only TEAC player model that uses a Philips TDA1547 as a D/A converter. The sound quality is not sharp due to the hardware of VRDS, and the sound quality is well-balanced, which brings out the characteristics of the relaxed DAC7. The exterior has small scratches and a feeling of use such as dullness. ※There is a noticeable scratch on the front panel. Serial 30300 (Yamato Yuki)
Maintenance information: 2024.4.26 Maintained (inspection of each part carried out, tray belt clamp, belt turntable bearing wear, replacement pickup, and mechanical part cleaned and lubricated.
(Check operation)
Accessories: instruction manual copy remote control (for VRDS-15)
Main specifications: 2-channel CD player frequency characteristics 1 Hz to 20 kHz 8 times oversampling 20 bit digital filter W442 x H149 x D331 mm 11 kg
Maintained by the manufacturer! A special edition model of VRDS-10. This is the only TEAC player model that uses a Philips TDA1547 as a D/A converter. The sound quality is not sharp due to the hardware of VRDS, and the sound quality is well-balanced, which brings out the characteristics of the relaxed DAC7. In addition to being able to see many scratches on the exterior and top plate and abrasions on the front panel, there is dullness and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.14 manufacturer maintained (flat cable adjustment) 2024.4.13 manufacturer maintained (belt replacement, deteriorated parts replacement, inspection and adjustment of various parts)
Accessories: remote control, copy of instruction manual, lock key
Main specifications: 2-channel CD player frequency characteristics 1 Hz to 20 kHz 8 times oversampling 20 bit digital filter W442 x H149 x D331 mm 11 kg
The dirt, tobacco smell, and feeling of use are conspicuous, so it is currently sold. An HX series higher-level machine that effectively controls space. It's a speaker for home theaters, but the sharp sound is attractive (Daiki Goto)
Maintenance information: 2024.5.7 operation confirmed
Accessories: none
Main specifications: 3-way bass reflex type (anti-magnetic) 20cm cone woofer x 2, 13cm cone midrange, 3cm dome tweeter 6Ω 364 x 1102 x 397 mm 32.5 kg
*Currently sold. BOSE's high cost performance model for a wide variety of applications. It reproduces sounds unique to BOSE that are powerful and sharp, such as jazz, rock, etc. You can feel the spread of the sound by swapping the position of the tweeter left and right and listening. Overall, there is dirt and a feeling of use. Serial 017958921760022AC, 017958921760021BC (Fujisawa Yukishi)
Maintenance information: 2024.5.6 operation confirmed
Accessories: saran net
Main specifications: 2 way 2 speakers, 8 ohms, maximum input 60 W, W380 x H240 x D170 mm, 3.9 kg
JBL's 38cm cone type full range unit. Unlike modern heavy bass, it can reproduce bright and light low frequencies. It is a unit that can do a variety of sound makeup depending on the driver or tweeter that is sharp and adapts well. There are small scratches and dirt on the exterior, and there is a small crack in the cone on one side (Ryo Mizusaki)
Maintenance information: 2024.5.3 sound output confirmed
Accessories: none
Main specifications: 38cm cone type full range unit Alnico 6.6/6.3 Ω (actual measurement) 103 dB recommended enclosure internal volume 114 to 338 L frequency characteristics 50 to 6,000 Hz screw pitch (diagonal) 370 mm 7 kg
Comes with a magazine! A full-range unit from Stereo magazine's 2016/8 appendix. Uses Fostex's first aluminum cone diaphragm and center cap. It features good sounding and sharpness. (FUJISAWA KOSHI)
Maintenance information: 2024.5.2 operation confirmed
Accessories: gasket, magazine (original box)
Main specifications: 8cm full range unit impedance 8 ohms minimum resonance frequency 105 Hz sound pressure level 82.5 dB
※There is no compatible cartridge, so it has not been checked. Synthetic diamond round needle is a replacement needle that can be used with SHARP (Optonica) record cartridges. If you use it, be sure to use it as a stock. The exterior has a feeling of use such as dullness (Jun Tamai)
Maintenance Information: 2024.4.28 Operation Unchecked
Accessories: none
Main specifications: mm needle pressure 1.5g
The price has been reduced! 2024/3/15 sales price 79,800 yen 2023/11 maintenance completed! The middle class of the Sansui α series. The strength of the bass and the sharpness of the mid to high notes are mixed in a well-balanced manner, so you can enjoy not only jazz, but also various genres such as rock and pop music. The exterior is dull and the top plate is damaged. Serial 637065630 (Tomonori Asaine)
Maintenance information: 2023.11.23 Maintained (disassembling and polishing grease applied to each switch (tone, turnover, loudness, muting, subsonic, power amplifier direct, MM/MC, reckout switch), each volume and switch clean output relay and headphone relay replacement main amplifier and power supply part solder repair, interior and exterior inspection, cleaning, side cover screw replacement operation confirmation when power is turned on It makes a popping sound, but it stabilizes in a few minutes)
Accessories: copy of instruction manual
Main specifications: effective output 160W+160W (6Ω) 130W+130W (8Ω) damping factor 100 (6Ω) W448 × H160 × D441 mm 20.3 kg
The disposal price has been reduced. Member prices are not applicable. 2024/3/7 sales price 128,000 yen Maintained! A crisp, bright, and sharp sound typical of Marantz from the 1970s. Exactly, it's an American sound on the west coast. The design is also a simple design typical of US Marantz. ※The leg is out of stock. The exterior has dullness and small scratches. Serial 4180 (Yonejima Satoshi)
Maintenance information: 2024.3.7 Maintained (single CH power stage transistor replacement. Screwdriver transistor resistor replacement. Drive Tr Capacitor Replacement Contact polishing, aging test)
Accessories: No accessories
Main specifications: 125W+125W (8Ω) W445 × H170 × D265 mm 14.8 kg
Internal and external maintenance has been applied and brushed up. The vivid sense of dynamism and the sharpness of the high frequencies typical of YAMAHA have been revived. It has a low frequency thickness that 1000 monitors don't have. It is a timeless masterpiece with a clear sense of transparency, upper and lower driving force, and the smooth connection, and the heavy exterior with an ebony finish that stands out at a glance even today. It is in good condition due to maintenance. Serial 11478L 11478R (Yamato Yuki)
Maintenance information: 2024.4.1 operation confirmed
2023.9.4 Maintained (exterior repair/polishing/clear finish. Rear baffle repair/painting. Saran net replacement. Unit frame painting. Network maintenance (Since the terminals have already been replaced with external products, adjust the direction and tighten, apply a screw fastener, and replace the mounting screws. ATT contact status check (check that there are no gaps). A frequency characteristic measurement check (~ 42 kHz) was performed, and the original capacitor was continuously used because the results were good. Input/output waveform and balance check, sound output check) Unit detachable)
Accessories: saran net
Main specifications: 3-way sealed playback frequency band 40Hz to 20kH sound pressure level 90dB rated input 50W maximum allowable input 100W impedance 8Ω crossover frequency 500Hz/6kHz dimensions W395 x H710 x D349 mm 39 kg
Maintained! A pre-main amplifier with Class A operation that allows you to enjoy sharp sound. The moderate amount of extrusion is comfortable, and this model is suitable for jazz and rock. The exterior has small scratches and dullness appropriate for the model year (Daiki Goto)
Maintenance information: 2024.1.22 maintained (balance volume (replacement) replacement, output relay replacement, input selector, reck-out, MM/MC switching, MONO, loudness, CD direct switch disassembly polishing grease application, solder repair, other volumes, switch cleaning, internal inspection and cleaning, operation confirmation.)
Accessories: copy of instruction manual
Main specifications: 100W+100W (8Ω) input 6 systems PHONO (MM/MC) quarter A amplification method using CD/PHONO direct switch W462 x H164 x D376 mm 14.3 kg
Compatible with SHARP OPTONICA STY-101 This is a replacement needle for CART-101. Unchecked (Hiura Katsugu)
Maintenance information: operation unconfirmed
Accessories: original box
common needle. Compatible cartridges include Toshiba N-78D, TRIO N-64, SHARP STY-129, Marantz CTS-143, etc. Operation has not been checked (Hiura Katsugu)
Maintenance information: operation unconfirmed
Accessories: original box
The 1.5m PSE standard power cable is sharp, but the increase in S/N speed is not deliberate and I like it. When I held it, it was heavy and had a sense of luxury. There was rubbing and dirt around the plug (Kojima Yosuke)
Accessories: none