Payment and point member | Payment methods | Shipping methods | Warranty policy | Shopping procedure
- All
- All hardware
- All software
- Other
- Amplifiers
- Integrated amplifiers
- Control amplifiers (transister)
- Control amplifiers (tube type)
- Power amplifiers (transister)
- Power amplifiers (tube type)
- Channel dividers
- Tuners
- Other amplifiers
- Channel divider boad
- Integrated amplifiers (transister)
- Integrated amplifiers (tube type)
- Speakers
- Speakers (foreign companies)
- Speakers (Japanese companies)
- Full range units
- Woofers
- Drivers
- Tweeters
- Horns
- Enclosures
- Networks
- Speaker accessories
- Analog equipment
- Turntables
- Tonearms
- Step-up transformers
- Head amplifiers
- Phono equalizers
- Cartridges
- Headshells
- Phonograph
- Digital equipment
- D/A converters
- DAT decks
- MD players
- LD players
- DVD players
- CD players
- CD transports
- Network players
- Tapes
- Cassette decks
- Reel-to-reel decks
- Other tapes
- Accessories
- Accessories
- Cables
- Insulators
- Racks
- Headphone
- Parts
- Parts
- Tubes
- Manual
- Audio set
- Audio set
- Other audios
- Other audio
- Records
- LP jazz
- LP jazz vocal
- LP classic
- LP foreign music
- LP Japanese music
- Single records
- SP
- Other LPs
- Other soft
- Tapes
- Reel-to-reel tape
- Reel-to-reel tape jazz
- Reel-to-reel tape classic
- Other reel-to-reel tape
- Blank cassette tapes
- LD/DVD
- Laser disk
- DVD
- VHS
- Laser disk jazz
- Laser disk classic
- Other laser disk
- Laser disk movie
- CD
- CD jazz
- CD jazz vocal
- CD classic
- CD foreign music
- CD Japaese music
- Single CD
- Other CD
- Books
- Magazines
- STEREO SOUND
- MJ
- Other books
- Swing journal
- STEREO SOUND EX
- TUBE KINGDOM
- TAPE SOUND
- analog
- AUDIO ACCESSORY
- AUDIO PLAN
- AUDIO CRAFT MAGAZINE
- AUDIO BASIC
- JAZZ CRITIQUE
- stereo
- FM fan
- RADIO TECHNOLOGY
- RG
- description
- Speaker cable A next-generation speaker cable using 2.0m pair untreated 3.4 sq m terminals and thick PC-Triple C conductors. It's a modern sound with all three time signatures: high resolution, wide range, and startup speed (Daiki Goto) Maintenance information: 2024.5.7 continuity confirmed Accessories: none
- description
- An acoustic lens mounted on JBL monitor speakers such as the 4343 series. By attaching it, the sound of a horn that is too strong is moderately diffused and calmed down. There is dirt, dullness, etc. (Oikawa Tetsuji)
- description
- This is an MM cartridge used in Pioneer record players such as the PL-12, PL-12E, and PL-A20. The sound quality is straightforward without any habit, and you can use it easily. Maintenance information: 2024.5.7 operation confirmed Accessories: none Main specifications: mm type output voltage 5 mV needle pressure 2.5 to 3.5 g playback frequency band 15 Hz to 20 kHz dead weight 6.8 g
Manufacture:DENON
Price: JPY 2,273 Sold Out
- description
- This is a genuine shell that comes with the DP-1300M/DP-500M. Black model with meat removal processing. The exterior has a feeling of use such as dullness (Tomoho Asaine) Maintenance information: 2024.4.19 sound output confirmed Accessories: none
- description
- The price has been reduced. 2024/4/6 sales price 79,800 yen Maintained! Standard model of JBL's 1-inch driver unit. The playback band is wide, so you can enjoy changing the network cross freely. The toughness, sound pressure, and full-bodied mid-high sound are attractive for some input. The diaphragm is original, and there are scratches in places (Kojima Yosuke) Maintenance information: 2024.4.6 maintained (diaphragm installation adjustment Replace the following parts. DCR (37658/6.1 ohm diaphragm no scratch) DCR (38816/5.7 ohm diaphragm no scratch) Accessories: none Main specifications: 1 inch driver 500 to 20,000 Hz 8 ohms serial 37658/38816 W145 x D97 mm 5.1 kg/bottle
- description
- LUXMAN's discrete premium line selector. You can select sources for up to 4 models. High-rigidity aluminum material is used for the housing, and 6N (99.99997% copper) wire with little information loss is used as the wiring material. The exterior is in good condition with no conspicuous scratches (Oikawa Tetsuji) Maintenance information: 2024.5.6 continuity confirmed Accessories: instruction manual Main specifications: 6N copper wire, gold-plated internal wiring, 4 systems can be switched, W370 x H71 x D136 mm, 2.4 kg
- description
- This classic headshell is made of magnesium alloy and has an attractive, unobtrusive sound. Overhang and left and right tilt adjustments are possible (Kanai Hidetsugu) Maintenance information: 2024.5.4 sound output confirmed Accessories: none Main specifications: dead weight 10g
- description
- The die-cast aluminum shell has no screws, is heavy, and is well-built, and the design is stylish and creative. Rigidity is high and low frequency tightness can be expected (Mizushima Itsuro) Maintenance information: 2024.4.22 continuity confirmed Accessories: none Main specifications: Die-cast aluminum, self-weight 10.6 g
- description
- Genuine headshell included with Technics SL-1200mk7 etc. There is a slight chip in the screw hole (Mizushima Itsuro) Maintenance information: 2024.4.27 continuity confirmed Accessories: none Main specifications: dead weight 8.7g
- description
- A basic model in the best-selling AT100 series. The glossy sound quality makes classical and female vocals full of sex appeal. The cantilever is bent slightly to the right (Kanai Hidetsugu) Maintenance information: 2024.5.4 sound output confirmed, the cantilever bends slightly to the right Accessories: none Main specifications: VM type playback frequency band 8 to 20,000 Hz output voltage 4.0 mV needle pressure 1.4 g weight 6.6 g
- description
- The disposal price has been reduced! (Member discounts are not applicable) 2024/4/18 sales price 79,800 yen with MA15 woofer fixing bracket! ORIGINAL A floor-type enclosure that uses a rear-loading horn system. The interior has a folding horn structure with a total length of 2 meters, making it possible to reproduce powerful bass far exceeding its size. The exterior has chipped corners, scratches, repair marks, and paint peeling. Serial 11154 (Tomoho Asaine) Accessories: MA15 woofer grill net Main specifications: hole diameter 365 mm, screw pitch 420 mm backroad horn compatible speakers 2205, 2225, E140 minimum playback frequency 50 Hz main material particle board+Yonematsu laminated plywood (front baffle/road horn) W603 x H12 x D603 mm approx. 54 kg
- description
- ※Since the phono module has been replaced by an external manufacturer, it is inexpensive. Although it is a replacement module, surprisingly, it is comparable to the original LD2. The most famous Mark Levinson preamp. Mid-spectrum winding volume that demonstrates outstanding sharpness. It has vivid and energetic sound quality. The ability to listen with plenty of dynamism has an appeal that cannot be obtained with current preamps. There is a scratch on the wood cabinet and peeling on the back. Serial 1677/0818 (Sasaki Shota) Maintenance information: 2022.9.15 Maintained (replacement of all domestic capacitors and deteriorated capacitors in the power supply unit, replacement and re-encapsulation of operational amplifier IC defects in the RCH peak meter module, disassembly cleaning for main volume and input volume, external cleaning, operation inspection of attached cables, specification inspection, inspection of each operation. (PHONO contains an alternative module, but there is no operation problem) Accessories: power cord, connection cord, 3 sets of Remo pins Main specifications: Phono MM2 system [main body] W482 x H113 x D354 mm approx. 5.5 kg [power supply unit PLS-150] W102 x H113 x D257 mm approx. 2.5 kg
- description
- Comes with original box! Currently sold. The urethane inside has deteriorated, so it has been removed. Stax headphone and amplifier set. You can enjoy a very grainy and fresh tone. (Sasaki Shota) Maintenance information: 2024.5.6 operation confirmed Accessories: original box Main specifications: Playback frequency band 30 to 35,000 Hz sensitivity 94 dB SRD-7MK2: W73 ✕ H120 ✕ D215mm weight 1.5 kg
- description
- The body is SPU-G, but the needle tip has been replaced with an SPU Classic GE mk2. An SPU that fully conveys the appeal of analog. It is a cartridge that combines the softness of the classic series sound with the strong flavor (Sasaki Shota) Maintenance information: 2024.5.6 sound output operation confirmed Accessories: original box (for SPU GE ClassicMK2) Main specifications: MC type output voltage 0.2 mV impedance 2 ohms frequency characteristics 20 to 25,000 Hz internal resistance 6 ohms diamond needle nude Elliptical (elliptical needle) suitable needle pressure 4 g
- description
- ※There is no problem with operation, but it is currently sold because it is cheap. A small 2-way speaker made by ONKYO. The bass reflex system allows you to enjoy low frequency playback with a compact appearance yet a sense of volume. There is slight stickiness on the front (Daiki Goto) Maintenance information: 2024.4.10 operation confirmed Accessories: none Main specifications: 2-way bass reflex type rated impedance 4 ohms maximum input 120 W rated sensitivity level 82 dB W156 x H249 x D221 mm 4.1 kg
- description
- Comes with a remote control! Maintained! ES Series Prestige. The ATRAC TYPE-R DSP system is used, and in addition, by using an R core transformer for the power supply unit, a power supply with less interference and fluctuation than before can be seen, so it can be seen that there is quite a bit of commitment in terms of sound. Other convenient features are included, such as a mono recording/playback function that can be used at twice the length of the MD display, a rehearsal function that allows you to check edit points in COMBINE and DIVIDE, and a title function that allows you to record disc names and song names up to about 1,700 characters on a disc, making it a very easy-to-use model. There are scratches on the exterior. Serial 200500 (Fujisawa Yukishi) Maintenance information: 2024.5.2 maintained (tray drive belt replacement, back up battery replacement, analog recording level adjustment volume contact cleaning, pickup lens cleaning, good recording and playback tests (normal analog and digital input), normal timer start operation, normal operation confirmed) Accessories: remote control Main specifications: A/D converter: 24 bit D/A converter: current pulse D/A converter 24-bit variable (V.C.) filter, MD-CP compatible, 128 times oversampling, 24 bit digital filter, 1.6 mmFB chassis, 2.0mm x 2, double bottom plate size, W43.0xH12.6xD37.55cm, weight 15.3 kg
- description
- The price has been reduced. 2024/5/4 sales price 128,000 yen Maintained! An introduction to AccuPhase power amplifiers. Even though it was an entry-level model, its thin and stylish design was a popular model that was popular at the time. We don't choose preamps that combine with power amplifiers that feature delicate and elegant expressions. There is dullness and small scratches, but there are no noticeable scars (Sasaki Shota) Maintenance information: 2024.5.4 Maintained (2 output relays replaced, 3 electrolytic capacitors replaced, 2 semi-fixed VR replaced. Solder correction, connector cleaning) Accessories: manual Main specifications: output 120W+120W (8Ω), 2 speakers can be connected, with mono changeover switch W445×H131×D388mm 18.1kg
- description
- It is a model that uses PCOCC. It has a parallel 4-core structure with 2 inner cores for treble. The 2 outer cores are for bass. It features bright, crisp sound quality suitable for ROCK and POPS (Daiki Goto) Maintenance information: 2024.5.5 continuity confirmed Accessories: none Key Specifications: Speaker Cable PCOCC Conductor
- description
- * Since it has been replaced with an Audio-Technica balance plug, it is inexpensive. Balance cable 1.0 m pair. The copper/aluminum/brass hybrid configuration, which is also a characteristic of the company, has high resolution and is an exciting sound that comes out quickly (Daiki Goto) Maintenance information: 2024.5.5 continuity confirmed Accessories: none
- description
- The price has been reduced. 2024/5/2 sales price 99,800 yen SACD multi playback player. HDMI compatible A player with a core that looks like it was made by Sony and makes you feel that the range is wide. The high quality that can be relied upon as a playback device in everything is attractive. Equipped with a super audio D/A converter with a DSD filter+multi-level D/A converter system. There are line marks and dents on the exterior (Oikawa Tetsuji) Maintenance information: 2024.5.1 operation confirmed Accessories: remote control, power cable, copy of instruction manual Main specifications: [during SACD playback] Playback frequency range 2 Hz to 100 kHz, frequency characteristics 2 Hz to 50 kHz (-3 dB), dynamic range 110 dB or more, total harmonic distortion ratio 0.0012% or less [during CD playback] frequency characteristics 2 Hz to 20 kHz, dynamical clean 100 dB or more, total harmonic distortion ratio 0.0017% or less L [digital output] HDMI x 1, optical x 1 (CD only) [analog output] XLR x 1 ・RCA x 1 W430 x H124 x D390 mm approx. 10.2 kg
Manufacture:OPPO
Price: JPY 86,182
- description
- The price has been reduced. 2024/5/3 sales price 99,800 yen Hi-Res compatible USB-DAC, DAC that also functions as a network player. Equipped with ESS Technology's latest generation flagship DAC chip “ES9038PRO.” In addition to PCM sound sources of up to 32 bits/768 kHz, the USB input supports playback of high-resolution sound sources with the highest specifications, such as being compatible with playback of DSD sound sources of up to 22.6 MHz (DSD512) (Tetsuji Oikawa) Maintenance information: 2024.5.3 operation confirmed Accessories: remote control, instruction manual, power cable, original box Main specifications: USB audio input (USB B type) input format stereo PCM stereo DSD (DoP v1.1 or native) PCM sampling frequency 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz, 352.8 kHz, 384 kHz, 705.6 kHz, 768 kHz PCM quantization bits 16 bits, 24 bits, 32 bit DSD Sampling frequency 2.8224 MHz (DSD64) 5.6448 MHz (DSD128) 11.2896 MHz (DSD256) 22.5792 MHz (DSD512, native only) [coaxial, optical digital input] input format stereo PCM stereo DSD (DoP v1.1) PCM sampling frequency 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz DSD sampling frequency 2.8224 MHz (DSD64 DoP v1.1) compatible audio formats AAC, AIF, AIFF, APE, FLAC, M4A, M4A (Apple Lossless) ALAC, OGG, WAV, WMA, DSF, DFF maximum sampling frequency PCM192 kHz/24 bit/DSD2.8224 MHz (DSD64) W254 x H76 × D360mm weight 4.7 kg
- description
- The price has been drastically reduced. 2024/4/24 sales price 108,000 yen A phono equalizer amplifier equipped with a function to switch load impedance and load capacity according to the characteristics of the cartridge. Equipped with 2 line inputs, each position can be switched on the front side, and impedance settings can be adjusted with the back dip switch. The main unit is in good condition, but it is written in the instruction manual (Oikawa Tetsuji) Maintenance information: 2024.4.24 Operation confirmed Accessories: instruction manual, power cable Main specifications: NF type equalizer (RIAA) input sensitivity: MM 3.2 mV, MC HIGH 0.37 mV, MC LOW 0.12 mV input impedance: MM 34 kΩ, 47 kΩ, 56 kΩ, 100 kΩ (switchable), MC HIGH 40 Ω, MC LOW 2.5 Ω input/output: 2 unbalanced systems/1 unbalanced system W364 x H81 x D274 mm 4.3 kg
- description
- It is a preamplifier that can obtain more satisfaction than directly connected to a power amplifier in terms of sound image positioning, bass volume, and resolution. The cost performance is tremendous, and it is the best amplifier for serious audio projects in the future. There are no noticeable scratches (Sasaki Shota) Maintenance information: 2024.5.4 operation confirmed Accessories: remote control, manual, power cable Main specifications: line input RCA x 5 · TAPE x 2 · PHONO x 1 (MM/MC) line output RCA x 2 · TAPE out RCA x 2 size W431 x H99 x D337 mm weight 7.7 kg
- description
- The disposal price has been reduced! (Member discounts are not applicable) 2024/3/7 sales price 398,000 yen Exterior maintenance completed! Replace network capacitors with SOLEN film capacitors. The unit is DENTECH Tune HDP385, and the enclosure is made by Shinkosha. The unit is attached by removing the back plate, and the net does not come off the front. Classical music also goes well with symphonies. The exterior is generally beautifully finished due to maintenance. Serial AYT71012 AYT71012 (Tomonori Asaine) Maintenance information: 2024.3.7 Maintained (exterior repair/cleaning Rear baffle paint saran net replacement unit maintenance (exterior cleaning, low range center adjustment, screw tightening, high frequency magnetic circuit slit cleaning/center adjustment) ATT cleaning/knob adjustment unit detachment) 2015.5.14 Maintained (network capacitors replaced with SOLEN. Unit edge replacement. Magnetic circuit overhaul and operation adjustment. Saran net partial cleaning net tear repair, complementary color correction) Accessories: none Main specifications: used unit HPD385 frequency characteristics 20Hz to 20kHz allowable input 85W 92dB 8Ω W600 x H1075 x D380 mm approx. 42 kg/bottle
- description
- Maintained! The popular crossover 500 Hz. Please use it with the JBL2440/2441 driver. There is a sense of extrusion and granularity, and the connection to high frequencies is also natural. You can enjoy stretchy low frequencies and tense high frequencies. It is essential for constructing large systems centered around 38cm units (Sasaki Shota) Maintenance information: 2024.5.4 Maintained (12 terminal terminal mounting screws replaced, 24 insulating bushings replaced. Terminal area cleaning. Attenuator SW contact cleaning. Crossover 500Hz check OK) Accessories: none Main specifications: crossover 500 Hz network impedance 12 to 16 ohms high frequency level control 6/8/10 dB W121 x H153 x D130 mm 1.9 kg
- description
- Maintained! With a 7000 Hz crossover, this network is ideal for tweeters such as 075 and 077! Please enjoy using it in a way that suits your needs, such as 2 way or 3 way. Serial 35512 35917 (Sasaki Shota) Maintenance information: 2024.5.4 maintained (12 terminal terminal mounting screws replaced, 24 insulating bushings replaced, terminal part cleaned, 2 parts replaced for attenuator VR, crossover 7,000 Hz check OK) Accessories: none Key Specifications: Variable Level Control Crossover Frequency 7kHz 8Ω Weight 900g
- description
- Maintained! A D/A converter that was said to be close to analog sound. The high frequencies are tightened, the mid and low frequencies are mild, and the sound feels powerful with a sense of directness. The high cost performance also shines (Sasaki Shota) Maintenance information: 2024.5.4 maintained (21 replaced due to electrolyte condenser fluid leakage, electrolyte cleaning, pattern and solder correction, insulation washer replacement due to damage, sound and HDCD recognition checks on each input/output) Accessories: manual, power cable Main specifications: Input terminal/1 coaxial system, 1 optical system, ST link 1 analog output system (RCA) HDCD compatible D/A conversion chip using a multi-bit Barbrown PCM63P-K type W430 x H60 x D230 mm 4 kg
- description
- A rare JBL 46cm woofer has arrived! The thick sound that can only be produced with a 46cm woofer is attractive. Please try this large aperture unit that is compatible with digital recording and is advantageous for deep bass reproduction. The exterior has tape marks and magic marks on corn paper. Serial 181936/481666 (Sasaki Shota) Maintenance information: 2024.5.4 sweep test good Accessories: none Main specifications: 46cm cone woofer unit impedance 8Ω 99dB frequency range 25Hz to 1.6kHz recommended enclosure volume 140 to 340 lit diameter 464 ✕ depth 212 mm weight 13.2 kg
- description
- A standard machine that also supports 192 kHz/24 bit digital input. With the theme of improving speaker driving power, the power transistors on the power amplifier driver stage have been made larger, and you can hear sounds with a higher driving power with a sense of stability. There are no particularly noticeable scratches on the exterior (Oikawa Tetsuji) Maintenance information: 2024.5.3 operation confirmed Accessories: remote control, power cable Main specifications: 40W+40W (8Ω) PHONO (MM) optical digital input 2 systems coaxial digital input 1 system W440 × H105 × D370 mm 7.8 kg
- description
- Output transformer sale push-pull output 15 W primary: 8 kΩ secondary: 4/8/16 Ω W97 x H80 x D86 mm approx. 1.9 kg/piece (actual measurement, not including protrusions) There is a dull item with the original box, but it seems to be an unused item due to the condition of the terminals! Accessories: original box
- description
- The price has been reduced! 2024/4/29 sales price around 298,000 yen is good! A new-generation Lux vacuum tube control amplifier with completely new equipment, such as an exterior design and the addition of balance inputs. You can enjoy a nostalgic traditional design with modern high performance at the same time. Made in 2023 Serial 630600576B (Fujisawa Yukishi) Maintenance information: 2024.4.29 Operation confirmed Accessories: remote control, instruction manual, power cord Main specifications: Vacuum tube/ECC83S x 3, ECC82 x 5 inputs/3 lines, 1 balanced system, 1 phono system, 1 phono system, 1 recording input/output/line 2 system output/line 2 systems, power consumption 32W, W440 x H169 x D307 mm, weight 13.3 kg
Manufacture:MACTONE
Price: JPY 90,727 Sold Out
- description
- The disposal price has been reduced! (Member prices are not applicable) 2024/4/8 sales price 198,000 yen Maintained! Macton tubular OTL stereo power amplifier. Eight 6RA3 triodes are used in parallel per channel to enhance load impedance adaptability, and it also features a structure with Macton's unique balanced NF applied. The sound unique to OTL is thick and has a high sense of energy, and the high driving power is also attractive. The appearance is oxidized and dull. Serial 40704 (Yonejima Satoshi) Maintenance information: 2024.4.8 Maintained (power transformer primary side rewound repair by PSE inspection. 3 vacuum tube 6RA3 replacements Vacuum tube 6AQ8 replacement. Main volume disassembly cleaning repair. Vacuum tube socket and RCA jack caulk repair. Operation has also been checked with AC 100V (rated output 32W, SP:16Ω), please use speakers above 16Ω) Accessories: No accessories Main specifications: tubular low-load OTL stereo power amplifier 30W x 30W (8Ω) vacuum tube used: 6RA3 x 10/6RA8 x 2/12AX7 W370 ✕ H160 ✕ D270 mm 12 kg
Manufacture:自作
Price: JPY 15,273
- description
- The price has been reduced! 2023/10/7 This is a self-made MC step-up transformer with a sales price of 20,000 yen. According to the specifications, the boost ratio appears to be 1:10. Use it with high output cartridges such as the DL-103! (FUJISAWA KOSHI) Maintenance information: 2023.10.7 operation confirmed Accessories: none Main specifications: MC boost transformer input/output 1 system boost ratio 1:10 W 110 x H45 x D145 mm (actual measurement)
- description
- ※Cleaning solution is not included. VPI's classic vacuum record cleaner. Attach the record to the turntable, apply cleaner liquid, clean it with a brush, and then use a vacuum method to strongly suck fine dust and dirt that has entered the disc's groove. There is a dent in the corner Maintenance information: 2024.5.3 operation confirmed (rotation, vacuum OK) Accessories: instruction manual, power cable Main specifications: W394 x H235 x D362 mm 12.7 kg
- description
- JBL's 38cm cone type full range unit. Unlike modern heavy bass, it can reproduce bright and light low frequencies. It is a unit that can do a variety of sound makeup depending on the driver or tweeter that is sharp and adapts well. There are small scratches and dirt on the exterior, and there is a small crack in the cone on one side (Ryo Mizusaki) Maintenance information: 2024.5.3 sound output confirmed Accessories: none Main specifications: 38cm cone type full range unit Alnico 6.6/6.3 Ω (actual measurement) 103 dB recommended enclosure internal volume 114 to 338 L frequency characteristics 50 to 6,000 Hz screw pitch (diagonal) 370 mm 7 kg
- description
- * Since it has been replaced with an external plug, it is inexpensive. RCA cable, 0.5 m pair, LC-OFC class 1 conductor, long-selling product balance that can transmit pure signals has been produced for over 10 years. It is a cable with flat, tight bass and a smooth high-frequency luster. It rubs against the sheath and is dirty (Kojima Yosuke) Accessories: none
Manufacture:TEAC
Price: JPY 25,273
- description
- This is a high-resolution D/A converter. Dual monaural configuration, compatible with DSD 5.6 MHz and PCM192 kHz/32 bit USB inputs. You can easily enjoy the world of high-resolution audio from high-resolution sound source playback software installed on your computer. The output is equipped with an XLR balanced output in addition to the RCA output. Furthermore, these audio output levels can be selected from fixed, variable, and output off (Oikawa Tetsuji) Maintenance information: 2024.5.3 operation confirmed (playback confirmed up to PCM192 kHz/DSD 5.6 MHz, COAX/OPT playback OK, each output playback confirmed) Accessories: power cable Main specifications: PCM data sampling frequency 32K, 44.1K, 48K, 88.2K, 96K, 176.4K, 192 kHz W215 × H61 × D238 mm 2.0 kg
- description
- Speaker cable is an abnormally thin cable with 3.0 m pair ends for an unprocessed speaker cable. A cable boasting high resolution and a high amount of information. The sound quality changes drastically depending on how you use it, such as separating the main amplifier and speaker, and shortening the speaker cable, etc., so it's fun to drive the sound quality to your liking (Kojima Yosuke) Accessories: none
- description
- Speaker cable is an abnormally thin cable with 3.0 m pair ends for an unprocessed speaker cable. A cable boasting high resolution and a high amount of information. The sound quality changes drastically depending on how you use it, such as separating the main amplifier and speaker, and shortening the speaker cable, etc., so it's fun to drive the sound quality to your liking (Kojima Yosuke) Accessories: none
- description
- A very simple CD/SACD player. The sound with fast response and low center of gravity is attractive. You can fully enjoy SACD-like spatial expression and highly transparent sound at a low price. There is a small scratch on the top plate (Oikawa Tetsuji) Maintenance information: 2024.5.3 operation confirmed Accessories: remote control, power cable, instruction manual Main specifications: playable media/SACD, music CD, CD-R & CD-RW (music format, MP3, WMA) W420 x H113 x D340 mm 11.0 kg
Manufacture:OPPO
Price: JPY 5,455 Sold Out
- description
- The company's SONICA DAC remote control unit*Please check the manufacturer's website for operating environments, etc. (https://www.oppodigital.jp/discontinued-product/sonica-dac/）（及川 Tetsuji) Maintenance information: 2024.5.3 operation confirmed Accessories: none
- description
- ※Inexpensive because there are scratches and paint peeling. JBL professional tweeters. Since it is designed to make the sound fly far, the sound quality is solid and more straight compared to the company's consumer model 077. The mid to high frequencies are vivid, and the low frequencies are finished with a tight sound (Oikawa Tetsuji) Maintenance information: 2024.5.3 operation confirmed Accessories: none Main specifications: horn type tweeter impedance 16 ohms playback frequency band 6,500 to 21,500 Hz (manufacturer specified), crossover 7 kHz, efficiency 105 dB, W100 x D84 mm, 3 kg/book
Manufacture:不明
Price: JPY 5,455
- description
- Woofer clamp mounting hardware kit very similar to JBL MA15, set of 8 (Oikawa Tetsuji) Accessories: none
- description
- ※It has been replaced with a cloth edge. An improved version of the compact and popular blockbuster model CONTROL1. It is a speaker that can be used in a variety of ways, from pure audio to surround sound. There is a crack in the rubber part of the saran net (Oikawa Tetsuji) Maintenance information: 2024.5.3 operation confirmed Accessories: none Main specifications: 2 way 2 speakers bass reflex bookshelf type 4Ω 125W W157 x H233 x D143 mm 1.8 kg
- description
- The price has been reduced. 2024/4/27 sales price 99,800 yen remote control with wood cabinet! Good synthesizer FM tuner. It is a high-performance tuner with high resolution and excellent operability, and allows you to listen to elegant and imposing sounds just like the luxurious exterior stored in a wood cabinet (Sasaki Shota) Maintenance information: 2024.4.27 Operation confirmed Accessories: wired remote control, copy of manual, power cable Main specifications: reception frequency 76.1 MHz to 89.9 MHz power consumption 25 W dimensions W466 x H188 x D391 mm weight 14.1 kg
- description
- The price has been reduced. 2024/4/10 sales price 26,800 yen ※6 month warranty triode MM/MC compatible phono equalizer. You can easily enjoy records even with an amplifier that does not have a PHONO input. It's slightly dull (Daiki Goto) Maintenance information: 2024.4.10 operation confirmed Accessories: instruction manual, power cable Main specifications: semiconductor circuit input impedance mm47kΩ/mc2Ω to 47Ω compatible gain mm36dB/mc55dB W90 x H100 x D230 mm 1.6 kg
- description
- The price has been drastically reduced. 2024/1/20 sales price 99,800 yen ※The output terminals have been remodeled and 1 system has been added. This D/A converter has an impressive natural and supple texture. Another DAC board has been added to lock up to 48kHz. Equipped with a TOS optical input terminal, it is equipped with an Analog Devices 20-bit resolution DAC chip. It contributes to a rich amount of information. Soft and warm sound (Sasaki Shota) Maintenance information: 2024.1.20 Operation confirmed Accessories: power cord, BNC conversion plug Main specifications: 20 bit 8 times oversampling 32 kHz, 44.1 kHz, 48 kHz digital input = BNC3 system, optical 1 system digital output = BNC1 system, TOS optical 1 system analog output = RCA1 system size W483 x H65 x D312 mm 5.5 kg
Used
Consigned
Hold
Reserved
Sold Out-
-
- Company profile
- Privacy policy
- Contact
- Newsletter back issues
- Hi-Fi Do live camera!
- Today's software
- Today's hardware
- New arrival alert system
- Japanese
-
Hi-Fi Do Online Newsletter
-
Payment methods
-
Shipping methods
-
Warranty policy
-
Shopping procedure
-
Hi-Fi Do Record Shops Softs, Audio parts and Tubes can ship overseas.Ordinary,we use EMS but for large order,we use SAL or Surface.For Asia,it cost 1,200JPY/1LP,900JPY/1CD.Please check at the shipping cost table for more detail.
-
Meaning of icons
