Speaker cable can be replaced with a 2.0m pair end banana plug Y lug. Uses G.S. #79nano3のアッパーバージョンとして企画され、導体にPC -OCC speaker cable impregnated with 3 times the concentration of gold/silver colloid liquid in a high sound quality OFC line (Tamura Eiji)
Maintenance information: 2024.5.16 continuity confirmed
Accessories: Y lug
The 0.5m digital RCA cable terminal is a high quality coaxial cable compatible with REAN (NEUTRIK) HDTV Digital Video. This cable is clear and has good cost performance (Tamura Eiji)
Maintenance information: 2024.5.16 continuity confirmed
Accessories: none
Comes with a dedicated shell! A mid-grade model that uses a solid microlinear needle that achieves low distortion. Trace power has increased and frequency characteristics have been improved (Tamura Eiji)
Maintenance information: 2024.5.16 Operation confirmed
Accessories: none
Main specifications: VM type playback frequency 20 to 25,000 Hz needle pressure 1.8 to 2.2 g (2.0 g standard) load resistance 47 kΩ mass 6.1 g
※Since it is cheap, it will be handed over as is. Chinese vacuum tube amplifiers have arrived. The vacuum tube uses FU32, and is compact and designed to be just the right size for a desktop, etc. There is a thread on the exterior (Tamura Eiji)
Maintenance information: 2024.5.16 Operation confirmed
Accessories: none
Main specifications: 4W x 2 (4Ω) frequency response 26 to 38 kHz W296 x H150 x D210 mm weight 5.7 kg
※Since it is cheap, it will be handed over as is. This is a compact Chinese vacuum tube amplifier. It comes with a VU meter, so you can enjoy looking at it. The size is designed to be just right for desktops, etc. There is a thread on the exterior (Tamura Eiji)
Maintenance information: 2024.5.16 Operation confirmed
Accessories: none
Main specifications: Vacuum tubes used: 6SN7GT x 2, 5Z4P x 1, 6N1N x 4, W260 x H145 x D253 mm, weight 5.5 kg
It is a headphone amplifier with separate power supply with a preamp function. Genuine Naspec. It is compatible with most commercially available headphones, and high sound quality playback is possible even with inner-earphones or authentic stereo headphones. There are small scratches and dullness on the exterior. Serial KRHQ1200069/KRHQP120069 (Yonejima Satoshi)
Maintenance information: 2024.5.16 Operation confirmed
Accessories: power cord, connection cord
Main Specifications: Dynamic Range 110dB SNR 115dB Output Impedance 8Ω Body: W185 x D175 x 53mm 1.0 kg Power Supply Unit: H185 x D150 x H53 mm 1.7 kg
The CD mechanism has been replaced at Denon! Denon design series CD player. It is equipped with an inexpensive yet highly accurate D/A converter that is compatible with MP3 and WMA files. Since it can also be used vertically, it is attractive that it is easy to adjust where it is placed. The exterior is dull and has small scratches. Serial ADR 27190603014 (Tamura Eiji)
Maintenance information: 2024.5.16 manufacturer maintained
Accessories: remote control, power cable
Main specifications: analog output x 1, coaxial digital output x 1 size W200 x H86 x D 240 mm, weight 2.4 kg
Mark 2600 is famous, and you can't underestimate this either. The power is modest compared to the 2600, but I also like the clear, powerful sound and rugged design. There are dents on the exterior and upper right grill, and a feeling of use can be seen such as dullness, small scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.14 Operation confirmed
Accessories: none
Main specifications: 100W+100W (4Ω to 8Ω) W481 x H142 x D246mm 10 kg
Headshell compatible with EMT tonearms. Why don't you install your favorite cartridge and enjoy it (Murakoshi Yoichi)
Maintenance information: 2024.5.10 sound output confirmed
Accessories: none
Main specifications: dead weight 9g
Accuphase's core preamp. It inherits the design technology of the higher-level model C-2800 and is equipped with AAVA volume control. You can enjoy high transparency and pure sound with fine particles typical of Accuphase. Exterior, small scratches on the INPUT selector dial, scratches on the left corner of the front window, small scratches on the remote control, dullness, and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.5.5 operation confirmed
Accessories: remote control, instruction manual, power cord, connection cord, original box
Main specifications: 7 line preamp input systems (RCA x 5, XLR x 2), 3 output systems (XLR x 1, RCA x 2) W465 x H150 x D405 mm 16.2 kg
Phono cable 1.2m 5pin-RCA high-purity 6NCU hybrid core wire 7-layer double 2-core shield structure, high quality cable that strongly shuts out induced noise. Comparing various cables as a standard for phono cables is also fun. The degree is generally good (Murakoshi Yoichi)
Maintenance information: 2024.5.16 continuity confirmed
Accessories: original box
This is a phono equalizer amplifier using FET. Excluding local feedback, the overall CR type circuit configuration is compatible, and MM/MC switching is handled by first-stage FET gain switching. The sound is neutral and unobtrusive. The appearance is fine, with no noticeable scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.14 Operation confirmed
Accessories: power cable
Main Specifications: Input Terminal Unbalance (RCA) 1 System Output Terminal Unbalance (RCA) 1 System mm3mV MC0.25mV W102 x H112 x D209 mm 1.0 kg
※The dust cover is missing. Maintained! Sony's first fully automatic player. Equipped with a biotracer that electronically controls all complex movements of the tone arm. An ambitious Japanese work packed with every gadget imaginable at the time! Needle pressure can be adjusted simply by controlling the knob on the front panel, and the applied needle pressure value is digitally displayed. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.2.27 Maintained (main unit internal inspection grease coating, cleaning) *At low temperatures, an offset will occur when the arm is forcibly fed by manual operation. The current situation is that stable operation is not possible unless the room temperature or the temperature inside the main unit rises to a certain extent (room temperature).
Accessories: none
Main specifications: Crystal Rock D.D. Fully automatic player system, needle pressure adjustment range 0.5 g to 3.0 g, W500 x H175 x D430 mm, approx. 15 kg
Denon network player. Starting with streaming services and internet radios, you can play back a variety of sound sources, such as music servers (NAS/PC/Mac, etc.) on a local network, sound sources stored on USB memory devices, smartphones, tablets, and Bluetooth devices. Serial BBG36200101300 (Murakoshi Yoichi)
Maintenance information: 2024.5.16 sound output confirmed
Accessories: remote control, instruction manual, power cord
Main specifications: digital audio input terminal, USB-A input x 1, analog audio output terminal... balanced output x 2, headphone output x 1, digital audio output terminal, optical digital output x 1, others/NETWORK x 1, Wi-Fi/Bluetooth antenna terminal x 2, IR control output x 1 W434 x H107 x D312 mm 3.9 kg
A stabilized power supply that improves sound quality by supplying a stable power source with very little noise to USB devices in place of PC bus power. It plays a part in upgrading the USB data you have (Murakoshi Yoichi)
Maintenance information: 2024.5.11 sound output confirmed
Accessories: AC adapter
Main specifications: AC100V output voltage DC5V maximum current 500mA input terminal Neutrik USB B type connector output terminal high quality USB cable approx. 10 cm+B type plug W97 x H31 x D39 mm
It is a model that has completely renewed all units in the JBL 4312 series control monitor, which has continued for over 30 years. In addition to the vibrant sound with a high sense of freshness, which is characteristic of the series, the expansion of the high frequency range is remarkable. The exterior has a feeling of use such as dullness. Serial 0261 0440 (Tomonori Asae)
Maintenance information: 2024.5.16 sound output confirmed (good sweep test)
Accessories: saran net
Main specifications: 3-way bookshelf type frequency characteristics 40 Hz to 40 kHz crossover 2 kHz 5 kHz 6 Ω output sound pressure level 93 dB W362 x H597 x D301 mm 18.1 kg
Maintained! JBL's 2-way network. An essential item when adding a tweeter driver to a full range unit such as the D130. The exterior has paint peeling and dullness. Serial 39585 38470 (Tomonori Asaine)
Maintenance Information: 2024.5.16 Maintained (12 Terminal Mounting Screws, 24 Insulating Bushings, Terminal Cleaning, Attenuator, VR Replacement, Crossover Check)
Accessories: none
Main specifications: 2-way network 8 ohm crossover 2,500 Hz W121 × H153 × D93 mm 0.7 kg
A low-cost clock generator that emits a high-performance master clock. It is recommended for those looking for expressive power with a precise amount of spatial information. By inputting a high-accuracy 10 MHz reference output obtained from a high-precision transmitter for measurement or military transmitters (using rubidium, cesium, GPS) not manufactured as an audio device to the external clock input terminal, it is possible to transmit an even more accurate master clock. The exterior is dull. (YONEJIMA Satoshi)
Maintenance information: 2024.5.15 Operation confirmed
Accessories: power cord
Main specifications: 2 clock outputs (BNC) 44.1 kHz/48 kHz magnification x 1/2/4 (maximum 44.1 to 192 kHz), 1 10MHz clock input system (BNC), size W190 x H56 x D220 mm 810 g
The disposal price has been reduced. Member prices are not applicable. 2024/4/11 sales price 118,000 yen ※It's cheap because it doesn't have a hood. Maintained! Vacuum tube stereo power amplifier. The bright and fresh sound typical of DYNACO is attractive. This is an amplifier I want to play in combination with JBL, Altec, etc. The grill is missing, and there is a feeling of use due to aging (Daiki Goto)
Maintenance Information: 2024.4.11 Maintained (· Block Capacitor 30/20/20 μF Defect Replacement · Stereo/Mono Switch Defect Replacement · Shock Noise Improvement Measures → Spark Killer Addition · Vacuum Tube 7199 Noise Exchange · Mylar Capacitor 390pF Deterioration Replacement 2 · Resistors 1/2 W Deterioration Replacement · BIAS Readjustment · Vacuum Tube Socket and RCA Jack Caulking Repair. *Other operation checks have been performed (measured at 32 to 41 W SP: 8 Ω at rated output AC 100 to 117 V)
Accessories: instruction manual
Main specifications: rated output 35W+35W vacuum tube EL34 x 4 7199 x 2 GZ-34 x 1 W330 x H165 x D240 mm 12.5 kg
The disposal price has been reduced. Member prices are not applicable. 2024/5/9 sales price 128,000 yen One side tweeter has been replaced! The successor model to the super popular “IKON Series.” It is equipped with a unit that uses wood fiber cone paper. The mid and low frequencies are rich, and the high frequencies sound smooth. You can feel the depth of the sound clearly (Daiki Goto)
Maintenance information: 2024.5.9 operation confirmed
Accessories: original box, jumper plate
Main specifications: 3 way 4 speakers, frequency characteristics, 39 Hz to 30 kHz, crossover 700 Hz, 2.6 kHz, 14 kHz, efficiency 89 dB impedance 6 ohms size W188 x D352 x H1028 mm weight 17.8 kg
The price has been drastically reduced. 2024/3/11 sales price 80,000 yen The MEDIUM/LONG knob doesn't work, so it rotates idle, but it's a specification. QUAD tubular AM tuner. It is designed to take power from QUAD 2. Also, although the meter is an overseas specification, it is a domestic band specification. ※This is a mono specification. In order to play on 2 channels, it is necessary to connect the pin jack to the RADIO 2 terminal of QUAD2 and press the MONO and STEREO switches simultaneously (Daiki Goto)
Maintenance information: 2024.3.11 Maintained (・AM antenna ASSY added/IF/RF readjusted*Other operation checked. *When tuning with TUNE, the LCD on the right edge will open. After tuning in, it is common to listen on WIDE RANGE. Also, since the LONG WAVE circuit in this model has been removed, the LONG/MEDIUM selector is invalid and the knobs are dummy.)
Accessories: antenna cable
Main specifications: W270 x H95 x D15 mm 2.6 kg (actual measurement)
The price has been reduced. 2024/5/3 sales price 27,800 yen This is a high-resolution D/A converter. Dual monaural configuration, compatible with DSD 5.6 MHz and PCM192 kHz/32 bit USB inputs. You can easily enjoy the world of high-resolution audio from high-resolution sound source playback software installed on your computer. The output is equipped with an XLR balanced output in addition to the RCA output. Furthermore, these audio output levels can be selected from fixed, variable, and output off (Oikawa Tetsuji)
Maintenance information: 2024.5.3 operation confirmed (playback confirmed up to PCM192 kHz/DSD 5.6 MHz, COAX/OPT playback OK, each output playback confirmed)
Accessories: power cable
Main specifications: PCM data sampling frequency 32K, 44.1K, 48K, 88.2K, 96K, 176.4K, 192 kHz W215 × H61 × D238 mm 2.0 kg
The price has been drastically reduced. 2024/5/3 sales price 99,800 yen Hi-Res compatible USB-DAC, DAC that also functions as a network player. Equipped with ESS Technology's latest generation flagship DAC chip “ES9038PRO.” In addition to PCM sound sources of up to 32 bits/768 kHz, the USB input supports playback of high-resolution sound sources with the highest specifications, such as being compatible with playback of DSD sound sources of up to 22.6 MHz (DSD512) (Tetsuji Oikawa)
Maintenance information: 2024.5.3 operation confirmed
Accessories: remote control, instruction manual, power cable, original box
Main specifications: USB audio input (USB B type) input format stereo PCM stereo DSD (DoP v1.1 or native) PCM sampling frequency 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz, 352.8 kHz, 384 kHz, 705.6 kHz, 768 kHz PCM quantization bits 16 bits, 24 bits, 32 bit DSD Sampling frequency 2.8224 MHz (DSD64) 5.6448 MHz (DSD128) 11.2896 MHz (DSD256) 22.5792 MHz (DSD512, native only) [coaxial, optical digital input] input format stereo PCM stereo DSD (DoP v1.1) PCM sampling frequency 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz DSD sampling frequency 2.8224 MHz (DSD64 DoP v1.1) compatible audio formats AAC, AIF, AIFF, APE, FLAC, M4A, M4A (Apple Lossless) ALAC, OGG, WAV, WMA, DSF, DFF maximum sampling frequency PCM192 kHz/24 bit/DSD2.8224 MHz (DSD64) W254 x H76 × D360mm weight 4.7 kg
RCA cable 1.0m pair revision B type signature series There is little dramatization in the tone, but you can enjoy a spectacular sound field feeling as if the speaker size has been larger by one size or more. There is dullness on the plug (Kojima Yosuke)
Accessories: none
Both inside and outside have been maintained! This is an ultra-rare speaker Allegro equipped with Monitor Gold. This bookshelf is almost the same size as a 3LZ. It is an attractive speaker with a beautiful sound unique to Monitor Gold and a mid-low range resolution that is a bit different from 3LZ. It lets me listen to quality that is compatible with everything. Serial SG1515/SG1517 (Yonejima Satoshi)
Maintenance information: 2024.5.12 maintained (saran net reinstallation/resonance prevention measures, unit maintenance: magnetic circuit gap cleaning/center adjustment for both low and high frequencies, network maintenance: frequency characteristic check, ATT cleaning, terminal cleaning, 4-pin direct connection modification repair. Exterior repair/polishing/oil finishing, rear baffle repair/painting)
Accessories: No accessories
Main specifications: unit using a coaxial 2-way bass reflex speaker system 12 inch MONITOR GOLD coaxial 2-way playback frequency band 25 Hz to 20 kHz maximum input 15 W input impedance 8 Ω crossover frequency 1 kHz dimensions W380 x H583 x D 240 mm weight 16.2 kg (actual measurement)
A round needle model that has become valuable. The high range is soft and the bass is thick, and it is characterized by the thickness of the midrange represented by the bobbon-shaped frequency characteristics. The suppleness of the tone creates a sound field that you won't get tired of listening to. Kanchireya is slightly to the left. Serial 21536 (Fujisawa Yukishi)
Maintenance information: 2024.4.6 operation confirmed
Accessories: needle cover
Main specifications: MC type output voltage 0.2 mV needle pressure 3 to 5 g internal impedance 2 ohms weight 31 g
The price has been drastically reduced. 2024/5/14 sales price 158,000 yen The top plate has line damage, so it's cheap. Genuine Rin Japan. A famous player that brought network audio to the world at a high level. Equipped with the same functions as the KLIMAX DS, such as balanced output. The density of sound and the rich amount of information are attractive. The remote control is LINN's general-purpose type (Oikawa Tetsuji)
Maintenance information: 2024.5.14 operation confirmed (PCM/playback up to 192 kHz OK)
Accessories: power cable, universal remote control
Main specifications: support files FLAC, WAV, AIFF, AAC, MP3, WMA W381 x D360 x H80 mm 4.0 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/5/12 AccuPhase CD player with sales price 148,000 yen. It is a CD player developed by introducing technology cultivated with separate systems, DP-80L/DC-81L. You can hear a sound with clear outlines and high transparency, just like the Accuphase from the 90s. Appearance, dullness, small scratches, and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.5.8 operation confirmed
Accessories: remote control, copy of manual
Main specifications: 18-bit DAC, 2 analog outputs, 2 balanced outputs, 2 digital output systems, W475 x H115 x D325 mm, 14.5 kg
All internal deteriorated capacitors and parts have been replaced! Furthermore, a new dust cover has also been created so you can use it comfortably. A masterpiece model of a semi-auto player. The torque and braking power of the motor are excellent, and the stability of operation is impressive. The sound quality, which is delicate and has an excellent sense of resolution, brings out the performance of the cartridge well. There are thin threads on the exterior. Serial 10700499 (Yonejima Satoshi)
Maintenance information: 2024.2.29 Maintained (new dust cover created, motor part removed, shaft and bearing cleaned and lubricated. The tact SW on the operation part and the electrolytic capacitor on the internal board were replaced with a new one. Resolder the board. Remove the area around the arm, clean each part after disassembly, replace the shaft bearing, inspect the internal lead wire, and reassemble. Dust cover hinge reinforcement bracket created. Exterior cleaning, cabinet scratch polishing, rotation speed check, operation test of each part, sound test)
Accessories: instruction manual, screws, EP adapter
Main Specifications: Quartz Lock DD Drive Auto Lift Up Static Balance Type Compatible Cartridge Weight 2 to 12 g Needle Pressure Range 0 to 3 g W490 x H182 x D410 mm 14.5 kg
Transistors, capacitors, and many other parts have been replaced and refreshed and maintained! It was the highest-grade model at the time and had a vintage sound that overwhelmed the others, and by actively replacing deteriorated parts, the sound, which tends to be cloudy, has become clear, and the original momentum of the sound has been revived. It is particularly compatible with the JBL Lancer series back then. The exterior is dull, but it is in a good category even when viewed from the year it was released (Oikawa Tetsuji)
Maintenance information: 2024.5.15 Maintained (capacitor, transistor, heat dissipation sheet, semi-fixed resistor, fuse replacement. SP terminal created. Various SW/VR internal cleaning. Clean each board contact. Solder again after removing the old solder. Internal and external cleaning, idle DC offset adjustment. (Audio output tested for various inputs and all SP terminals)
Accessories: copy of instruction manual
Main specifications: 80W+80W (8Ω) frequency characteristics 5Hz to 100kHz tone control/bass, midrange, treble 3-stage adjustment W462 x H155 x D316 mm 17.5 kg
Taok's popular 4-tier audio rack. Strong construction typical of TAOC. It tightens the tone of the audio system. The length of the pole has been changed from the original. Scratches are conspicuous (Daiki Goto)
Accessories: instruction manual
Main specifications: W600 x H920 x D520 pole length 350, 250, 200 mm weight 21 kg (actual measurement)
All 6 woofers and midrange edges have been replaced! A European-designed tall boy speaker that drastically changed the image of JBL. The combination of gentle treble and unobtrusive low frequencies is truly European modern. It's a great speaker for listening to female vocals and small-group classical music. There are dents, line marks, etc. on the top plate and sides (Oikawa Tetsuji)
Maintenance information: 2024.5.15 maintained (2108H edge replacement and disconnection repair, 2105 edge replacement)
Accessories: jumper plate
Key Specifications: 3 Way 4 Speaker Crossover 300Hz/3KHz 91dB 6Ω W273 × H1130 × D342 mm 25.0 kg
The price has been reduced. 2024/4/14 sales price 79,800 yen LE8T's ancestral 20cm cone type full range unit that makes the most of the basic design of the D130 in a small caliber. It's small and has a cute appearance, but the bright, clear, and tense sounds make you feel like JBL from the good times. In addition to leaving small repair marks on the exterior and part of the cone, there is a feeling of use such as dullness, sticking marks, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.4.11 Maintained (cone repair)
Accessories: none
Main specifications: 20cm cone type full range unit, allowable input 30W, 8Ω, 97dB (1kHz), recommended enclosure, internal volume: 42L to 113L, depth: 76mm, weight: 2.3 kg
The price has been reduced. 2024/4/27 sales price 79,800 yen This is a 3-way center speaker with the tuning that best matches the 500, 300, and 100 of the company's Silver series. Since the C350 was designed to pursue only performance without considering size restrictions, the dynamism in terms of sound quality is impressive. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.26 Operation confirmed
Accessories: saran net, jumper (general purpose) original box
Main specifications: 3-way sealed frequency characteristics 40Hz-35,000Hz crossover frequency 830Hz/3,200Hz allowable input 200W recommended amplifier output 80-200W W560×H235×D240mm 14.9kg
Pioneer ceramic straight arms. This is a genuine arm for the company's record player, and is also compatible with PL-70L2 and P3a (Satoshi Yonejima)
Maintenance information: 2024.5.15 continuity confirmed
Accessories: No accessories
Main specifications: straight arm pipe compatible player PL-7L PL-70L2 P3a, etc.
This is a high quality line cord that takes advantage of the characteristics of 4266, a 1.0m pair of RCA cables with a four-core shield structure (Tamura Eiji)
Maintenance information: 2024.5.15 continuity confirmed
Accessories: No accessories
It's early plastic shell, but the interior has been replaced with a new one. The rich, rich SPU-like sound is attractive. The built-in transformer gives the impression that transparency and clarity have been improved. The exterior is broken into the plastic cover, and there is a feeling of use such as dullness. Serial 624056 (Murakoshi Yoichi)
Maintenance information: 2024.5.8 sound output confirmed
Accessories: original box
Main specifications: MC type with built-in transformer, output 10 mV, needle pressure 3 to 4.5 g, dead weight 32 g
Comes with side wood. A masterpiece model of a CD player that reproduces the soft, powerful sound of analog. The thick mid-range and rich analog-like sound quality is a unique appeal. It is a high degree of perfection that can be said to be one of the goals in terms of sound quality among CD players of all time. The exterior is good with no noticeable scratches over time, and it is only dull (Yasuhito Koshihama)
Maintenance information: 2023.12.8 maintained (45 capacitors replaced, CD mechanism, turntable motor high rotation torque? →Dismantling. Spindle cleaning, other laser pickups, poor height → power supply in the main ard, analog part coupling C, bypass C, etc., capacity variations → replacement, front button internal contact all polishing ~ aging test 10H ~
Accessories: power cable, side wood x 2 pieces
Main specifications: CDM3 mechanism, multi-bit PHILIPS TDA1541D/A converter, 3 analog output systems (XLR x 1, RCA x 2 (fixed/variable)), 1 digital output (AES), 1 clock input/output system (BNC), W320 x H131 x D355 mm, 6 kg
※Since there is no manufacturer, it will be handed over as is. CSE isolation regulator. AC is converted to DC, stored in a capacitor, and then the sine wave is amplified analogically. It is a low impedance constant voltage power supply suitable for load devices with high power consumption. The rated output is 500W, and the output frequency can be changed to 50, 60, 80, 100, and 120 Hz, and it also has a soft start function to reduce through lines and inrush current, so it seems useful. The exterior, paint deterioration, dullness, small scratches, etc. can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.5.10 continuity confirmed
Accessories: original box
Main specifications: outlet with 3P ground x 2 W328 x H176 x D433 mm 18 kg
※Since there is no manufacturer, it will be handed over as is. PSE standard product. Once the AC power source is converted to DC, a new 60 Hz sine wave is created using the built-in transmitter to generate a clean power source. The output power is 100W. Recommended for use with low power devices such as preamps, CD players, analog players, etc. Comes with an earth polarity switching function. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.11 Operation confirmed
Accessories: original box
Main specifications: output power 100W output frequency 60Hz dimensions W221 x H145 x D415 mm weight 12 kg
Early red axis model! Mono cartridge OFD25 initial type for EMT arms. The sound quality is clear and tight, and it has a strong thickness unique to mono. While it has a characteristic European luster that can be seen at every end of the sound quality, it reproduces the sound of the source without coloring. *Since it is mono, the output is Rch only, so please use the amplifier's mono switch. The cantilever is slightly to the left (Murakoshi Yoichi)
Maintenance information: 2024.5.5 sound output confirmed
Main specifications: MC type needle tip diameter 25 μm diamond needle impedance 37 Ω (right output) needle pressure 5 g output voltage 1.15 mV frequency characteristics 30 Hz to 15 kHz tracking angle 90 degrees dead weight 33 g
Maintained! A famous player that is still extremely popular even now, 20 years after its release. Despite its exceptional design and compact size, its sound quality is authentic, with thickness and depth unique to the heyday of CDs. It is a famous machine that is still highly popular today. The exterior is dull overall ※The remote control is out of stock (Oikawa Tetsuji)
Maintenance information: 2024.5.15 Maintained (replaced and power supply resistor replaced due to FL tube drive IC failure. All operation switches have been replaced due to dust and dirt inside the main unit. Due to poor contact with the door opening/closing detection switch, the switch part was disassembled and the interior was polished and cleaned. Disassemble the SPDL motor, refill the bearing part with oil, and apply slide rail cleaning oil. (The optical system has been cleaned)
Accessories: instruction manual, stabilizer, power cable
Main specifications: frequency characteristics 2 Hz to 20 kHz terminal shape pin jack Coaxial digital output/coaxial connector optical digital output/optical output connector dimensions W280 x H90 x D370 mm weight 6.0 kg
A ham eraser that can input 1000 VA with 2 inputs. It is mainly effective with front-end devices such as CD players and amplifiers. Delicate and highly transparent sound quality can be obtained due to improved SNR, and clear, high-definition images can be obtained in video systems. PSE standard product. There is dirt on the exterior (Yonejima Satoshi)
Maintenance information: 2024.5.15 Operation confirmed
Accessories: No accessories
Main specifications: 2 input outlets W130 x H94 x D267 mm (without protrusions) approx. 2.0 kg
M/MC compatible A tubular phono equalizer developed with the aim of better analog reproduction. You can enjoy a warm, natural sound using a vacuum tube non-feedback amplifier and a CR-type equalizer. The impedance can be switched according to the cartridge. Externally, there are line scratches on the top plate. Serial 00180 (Yonejima Satoshi)
Maintenance information: 2024.5.15 Operation confirmed
Accessories: power cable
Main specifications: MM/MC compatible 12AX7 (ECC83) x 2 W300 x H100 x D260 mm 4.8 kg
Power cable 1.8 m PSE standard 5-core power cable using PCUHD and 4N-OFC. The plug is a 2P type that uses brass+rhodium plating. Thick, orthodox sound. The exterior is dull (Yonejima Satoshi)
Maintenance information: 2024.5.15 continuity confirmed
Accessories: No accessories
Power cable 1.8 m PSE standard 5-core power cable using PCUHD and 4N-OFC. The plug is a 2P type that uses brass+rhodium plating. Thick, orthodox sound. The exterior is dull (Yonejima Satoshi)
Maintenance information: 2024.5.15 continuity confirmed
Accessories: No accessories
Power cable 1.8 m PSE standard 5-core power cable using PCUHD and 4N-OFC. The plug is a 2P type that uses brass+rhodium plating. Thick, orthodox sound. The exterior is dull (Yonejima Satoshi)
Maintenance information: 2024.5.15 continuity confirmed
Accessories: No accessories