Maintained by the manufacturer. It has an aspect as an entry model, but it is a model where you can fully enjoy the uniqueness of Accuphase. In addition to the wide range, it is supple and has a slight sex appeal, so you can enjoy it for 12 minutes. A powerful unit that sounds regardless of whether it is a large or medium speaker. In addition to conspicuous marks on the exterior and top plate, a feeling of use such as dullness, stains, and threads can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.5.17 manufacturer maintenance (push switch, volume, etc., cleaning, parts replacement, decorative plate installation, inspection of each part, adjustment, safety check, pressure resistance check)
Accessories: power cable, remote control, manual
Main specifications: 100W+100W (8Ω) parallel push-pull output stage current feedback amplifier circuit W475×H170×D424mm 21.4 kg
The shadows of sound, and the expressive power of motion and stillness are really real. The sound is delicate and clear in the high range, and the overall transparency is high. The amplifier and volume adjuster are integrated, and an “AAVA” type volume with no mechanical contact is used. Many advantages can be obtained, such as improving the signal-to-noise ratio, reducing distortion ratio, suppressing changes in frequency characteristics, and not causing left and right volume errors. The external condition is that there are fine scratches on the top plate and line scratches on the sides. Serial H7Y419 (Yamato Yuki)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: instruction manual, power cable, remote control connection cable
Main specifications: 7 input/unbalanced (RCA) systems (however, 2 input systems can be used with an OP board attached), 2 balanced (XLR) systems output/balance (XLR), 2 unbalanced (RCA) systems each W477 x H156 x D412 mm 21.6 kg
RCA cable, 1.0 m pair, is the standard OFC series cable with thick gold plating, and is the company's standard cable with excellent corrosion resistance. The appeal is that it suppresses dramatization specific to cables and does not impair the individuality of amplifiers and players (Hiroki Aso)
Maintenance information: 2024.5.19 continuity confirmed
Accessories: none
RCA cable 1.0m pair oxygen-free copper OFC Ritz wire 2-core shield plug, standard AccuPhase line cable with gold plating. The sound is more gorgeous than the L-10. There are dullness and scratches around the plug, and abrasions on the sheath (Kojima Yosuke)
Accessories: none
A digital processor that inherits DP-720 technology. ES9018 manufactured by ESS Technology is operated in parallel. It is especially recommended for Accuphase CD players and transports. The SN is good, the sound has good visibility, and is excellent compatibility with high resolution and PC audio. The exterior is generally beautiful, although there are small scratches on the top plate. Serial A5Y134 (Yamato Yuki)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: instruction manual power cable
Main specifications: digital input HS-Link x 1 coaxial x 2 TOS link x 2 USB x 1 XLR x 1 USB 5.6448 MHz (1 bit 2 ch DSD) 384 kHz (32 bit 2 ch PCM) high resolution compatible dimensions W465 x H114 x D385 mm weight 14.4 kg
Accuphase power amplifier that achieved a damping factor of 700. It is an AB class stereo power amplifier that has greatly improved the performance and sound quality of the previous model, and it has both strength and subtlety, and seems to be compatible with various music scenes. The condition is generally good. Serial J2Y583 (Yamato Yuki)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: instruction manual, power cable, original box
Main specifications: 90W+90W (8Ω) 180W+180W (4Ω) load impedance 2 to 16Ω (in stereo) damping factor 700 (in stereo) input RCA1 system, XLR1 system, speaker output 2 systems dimensions W465 x H190 x D427 mm weight 29.2 kg
RCA cable 1.0m pair oxygen-free copper OFC Ritz wire 2-core shield plug, standard AccuPhase line cable with gold plating. The sound is more gorgeous than the L-10. There are dullness and scratches around the plug, and abrasions on the sheath (Kojima Yosuke)
Accessories: none
The disposal price has been reduced (member prices are not applicable). 2024/5/15 sales price 298,000 yen Orthophone Japan has been maintained! One owner item! It is a system equipped with the company's WTB-211 tonearm. The sound quality created by the wooden base and heavyweight metal turntable is a player that achieves well-balanced sound quality from low to high frequencies. It is a system that can be used stably without the need for frequency conversion (pulley), and allows you to fully sense not only the MM needle, but also the delicate nuances of the MC needle (Oikawa Tetsuji)
Maintenance information: Maintained by 2024.5.11 Orthophone (bearing replacement, correction process, operation confirmed)
Accessories: power cable, strobe, instruction manual
Main specifications: thread drive speed 45/33 W 470 x H250 x D370 mm 35.5 kg tone arm execution length 229 mm effective length 214 mm overhang 15 mm compatible cartridge weight 18 g to 26 g (shell cartridge included)
The disposal price has been reduced! (Member prices are not applicable) 2023/4/30 sales price 10,000 yen, balance cable, only 1.0m, uses the technology introduced in the 7N-A2070, uses stress-free 6N copper conductors, and thick rhodium plated plugs. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Maintenance information: 2024.4.30 continuity confirmed
Accessories: No accessories
The price has been drastically reduced. 2023/12/28 sales price 4,800 yen. *Set of 3 Ebony insulators Aiming for an optimal shape to balance sound quality, it is precisely machined with NC for woodworking (Mizushima Itsuro)
Accessories: none
Main specifications: size diameter 25 mm x H15 mm maximum load 30 g/1 piece
Maintained in September 2020! The highest-grade cassette deck equipped with dbx. The power supply unit and amplifier section have been thoroughly strengthened, and the sound quality as a cassette deck has been further enhanced. The impression is that the sound is clean without exaggerating too much. The exterior is dull and has a feeling of use. Serial 20415-07903 (Tomonori Asaine)
Maintenance information: 2020.9.28 maintenance implementation (capstan belt replacement and tape speed check, head base drive belt replacement, pinch roller detachment inspection cleaning and tape running check, operation key tact switch replacement x11, tape selector switch contact cleaning procedure, pattern correction and replacement due to C48/47 electrolytic capacitor installation failure, power cord replacement, playback level adjustment are high (Since it is folded, it is readjusted to a normal value and the recording level is adjusted, the recording test using the music source is good, Dolby recording, and the DBX recording and playback operation is good)
*Reference value: W&F (WTD) for self-recording and playback: 0.05% is good, but depends on the tape used.
*You may hear a slight squeaking sound from near the panel of this unit. Please note that this is a driving sound caused by pulses for lighting generated from the display tube (FL tube), but it cannot be removed.
Accessories: none
Main specifications: 3 head frequency characteristics 20Hz to 21kHz W475 x H112 x D353 mm 7.3 kg
It has been fully maintained with attention to detail, from exterior painting to gap cleaning! This is a 612C monitor speaker with a refined masterpiece 612A system. The unit is an early model 604-8G. The thick, unsluggish tone centered around the middle range is perfect for vocals. Since localization is also precisely determined, it is a practical and easy-to-use speaker (Murakoshi Yoichi)
Maintenance information: 2024.5.14 maintenance (exterior painting, new saran net replacement, unit maintenance (magnetic circuit rust removal in both low and high ranges, in-gap cleaning, center adjustment, terminal contact cleaning) network maintenance (frequency characteristic check, ATT cleaning, terminal contact cleaning) unit detachment, terminal replacement, new wiring)
Accessories: saran net
Main specifications: coaxial 2-way speaker unit 38cm coaxial impedance 8Ω 104dB crossover frequency 1.5kHz W648 × H749 × D509 mm 54.5 kg
The price has been drastically reduced. 2024/5/10 sales price 498,000 yen Both inside and outside have been maintained! Crescendo is a speaker system developed by Electri and sold with Altech's approval. This time it's an original original box specification with the 605B mounted on it. You can enjoy the tasteful design unique to vintage speakers and the crisp American sound with good texture and momentum. The exterior is also beautifully finished due to maintenance, but there are repair marks on the net (Sasaki Shota)
Maintenance information: 2024.5.10 Maintained (exterior cleaning/touch repair. Network assembly) 2023.9.3 maintained (exterior repair/polishing/clear finish front and rear baffle repair/paint saran net simple cleaning
Unit maintenance (low range side: viscoid adjustment/center adjustment, high frequency side: lead disconnection repair, magnetic circuit rust removal/gap cleaning/center adjustment, terminal contact cleaning) network maintenance (characteristic check, terminal cleaning) unit detachment)
Accessories: none
Main specifications: frequency characteristics 20 to 20,000 Hz, use unit 38 cm, 605B (coaxial type with built-in horn), maximum input 50 W, output sound pressure level 97 dB, crossover frequency 1.6 kHz, impedance 16 Ω
W690×H1018×D485mm
※Since it is cheap, it will be handed over as is. A mixer with an effect loop that can mix 3 channel inputs (microphone or line) and 3 stereo line systems. The exterior has dullness and scratches. Serial M1007000864 (Tamura Eiji)
Maintenance information: 2024.5.19 simple check OK (details will not be checked)
Accessories: No accessories
Main specifications: W483 x H44.5 x D152 mm weight 2.8 kg
Includes optional weight SD-33B (7,000 yen)! Stabilizer with stroboscope. The sound definitely tightens up when used. The exterior has a feeling of use such as dullness and small scratches (Hiroki Aso)
Accessories: none
Main specifications: brass diameter 80 mm x thickness 43 mm 730 g + 730 g = 1,460 g
RCA cable, 0.5 m pair, solid PSC+ copper conductor, cable with a large sound field and excellent sense of sound separation. It is a model with extremely excellent cost performance among the company's line cables (Murakoshi Yoichi)
Maintenance information: 2024.5.19 continuity confirmed
Accessories: original box
Set of 4 banana plugs. High sound quality solderless (no solder). This is a banana plug with a screw fastening system. This plug is orthodox and easy to use. The exterior has a feeling of use such as dullness or oxidation. (ASAINE Tomonori)
Accessories: none
Set of 4 banana plugs. High sound quality solderless (no solder). This is a banana plug with a screw fastening system. This plug is orthodox and easy to use. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Accessories: none
1 set of 4 Y rugs It is a screw-tightened metal Y lug terminal that can be easily fixed and is compatible with various core wire diameters and terminal diameters. There is dullness (Mizushima Itsuro)
Accessories: none
Main specifications: core wire strand diameter 1.5 to 4.0 mm, terminal diameter up to 6.0 mm
RCA cable, 1.0 m pair, PCOCC conductor, it is a clear, well-contoured sound typical of Audio-Technica. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Maintenance information: 2024.5.18 continuity confirmed
Accessories: none
The price has been drastically reduced! 2024/5/16 sales price 598,000 yen A speaker system that enables sound reproduction with excellent transparency and total balance by adopting the same unit with the know-how of the advanced model Ascent. The three-dimensional space radiated from AVALON's unique enclosure and the surprisingly clear sound image with high resolution are still alive and well here. Sound quality that doesn't make you aware of the presence of speakers has created a unique world. There is a feeling of use on the exterior due to small scratches, sunburn, dullness, etc. (Asaine Tomoho)
Maintenance information: 2024.5.16 sound output confirmed (good sweep test)
Accessories: instruction manual saran net jumper cable (general purpose product)
Main specifications: 2-way, 2 speakers, sealed system, floor type, unit used: bass/22cm cone type, treble/2.5cm titanium dome type Playback frequency band: 35 Hz to 24000 Hz ± 1.5 dB crossover frequency: unannounced impedance: 6 ohms output sound pressure level: 86 dB (2.83 V, 1 m) W279 x H991 x D381 mm 43 kg
Digital RCA Cable 1.0m is a high quality coaxial cable compatible with HDTV Digital Video. This cable is clear and has good cost performance (Tamura Eiji)
Maintenance information: 2024.5.16 continuity confirmed
Accessories: none
Comes with a glass base An all-in-one model that uses waveguide speaker technology to achieve an immersive and powerful sound like you would experience in a concert hall. In addition to CDs and FM/AM radios, you can wirelessly play music stored on your smartphone or tablet such as an iPad. Using your home Wi-Fi network, you can enjoy internet radio from around the world with just one touch. Operation and installation are simple and easy. It is in good condition (Oikawa Tetsuji)
Maintenance information: 2024.5.19 Operation confirmed (CD playback, remote control OK)
Accessories: remote control, instruction manual, power cable, FM antenna, glass base
Main Specifications: Wireless LAN: IEEE 802.11b/g/n Network Playback Sound Format: MP3, WMA, AAC, FLAC, Apple Lossless External Dimensions W368xH142xD221mm Weight 4.5 kg
※For business use, it will be handed over as is. Although it has a compact body, it is a professional power amplifier that can output 60 W/channel with an 8 ohm load. The driving power that easily drives small to medium class speakers is attractive. It can also be used as a 200W/8Ω mono amplifier with a bridge connection. The exterior is dull. Serial 2B-213896 (Yonejima Satoshi)
Maintenance information: 2024.5.18 Operation confirmed
Accessories: instruction manual, power cord
Main specifications: 60W+60W W482.5 x H44.4 x D254 mm 8 kg
This is a special edition model that uses precious Santos rosewood as the decorative layer for the popular B&W bookshelf 805D3. The deep brilliance of the body, which was lacquered 13 times, is reflected in sound quality. The sense of realism where sound particles can be picked up in detail is one of the highest degrees of perfection in 805 history. The exterior is not conspicuous, but there are threads on the top of the TW, etc. Serial 0211/0212 (Yonejima Satoshi)
Maintenance information: 2024.5.19 sweep test good
Accessories: instruction manual, saran net, jumper cable
Main specifications: 2-way bass reflex 8Ω 88dB W238 x H424 x D345 mm 12.6 kg
Speaker cable is a current CARDAS entry series speaker cable with an unprocessed 4-core structure with 1.5 m pair terminals. Use Perfect Surface Copper. The high frequency extension of the single line and the Ritz line is an appeal that cannot be obtained anywhere else. (FUJISAWA KOSHI)
Maintenance information: 2024.5.18 continuity confirmed
Accessories: No accessories
Entry model for Caldas with 2.0m pair of speaker cables, single with Y-lug specification on one side and bi-wire on the other side, 4-core structure. The resolution is also extremely high, and it is characteristic that it is smooth and has a high sense of transparency. (FUJISAWA KOSHI)
Maintenance information: 2024.5.12 continuity confirmed
Accessories: No accessories
The disposal price has been reduced! (Member prices are not applicable) 2024/4/21 sales price 99,800 yen DALI's HELICON series center speaker. If you use the company's HELICON series and are considering surround, please give it a try. The exterior is dull. Serial 7660180 (Fujisawa Yukishi)
Maintenance information: 2024.4.21 operation confirmed
Accessories: original box, saran net
Main specifications: 4Ω playback frequency band 49Hz to 27kHz W650 ✕ H210 ✕ D435mm weight 18.4 kg
A classic MC boost transformer. With 2 input systems, impedance can be switched to 3.40 ohms, and comes with a PASS line, you can freely enjoy various cartridges and tone arms (Takasaki Atsushi)
Maintenance information: 2024.4.29 Operation confirmed
Accessories: instruction manual
Main specifications: MC boost transformer input 2 systems switchable, primary impedance 40 ohm, 3 ohm switching, secondary impedance 4 kΩ boost ratio 1:10 frequency characteristics 10 Hz to 100 kHz, W97 x H65 x D155 mm, 800 g
※1 bottle only. Woofer for the famous Japanese instrument 2S-305. The Alnico magnet makes a pleasant low frequency. How about for repairs or for a new system? The urethane part is defective due to deterioration. (FUJISAWA KOSHI)
Maintenance information: 2024.5.18 Operation confirmed
Accessories: No accessories
Main specifications: Alnico magnet, 30 cm, 8 ohms, 20 W, 40 Hz to 1500 Hz, diameter: 313 x depth: 168 mm, weight: 8.5 kg
Exclusive stand for the DS-77HR sold separately. Of course, it is also recommended for other medium speakers. The exterior has creases, floats, scratches, etc. (Tamura Eiji)
Accessories: No accessories
Main specifications: W410 x H264 x D330 mm weight 10 kg
RCA cable 1.0 m pair has a calm sound and a unique thick air feel The LR coloring of the WBT plug and plug with WBT-0144 has deteriorated and there are cracks (Kojima Yosuke)
Accessories: none
The price has been reduced! 2023/5/11 sales price 49,800 yen ※Since manufacturer repairs are not possible, it will be sold as is. The remote control is now in stock. It is a compact premain amplifier equipped with plenty of inputs in a 214mm half-size housing. Compatible with a total of 3 digital inputs, 1 optical 2 coaxial, USB input up to 192 kHz/24 bit, and Bluetooth audio transmission. It is compatible with all kinds of music sources. The exterior is dull. Serial 53330E001473 (Yonejima Satoshi)
Maintenance information: 2024.5.9 operation confirmed
Accessories: instruction manual (English characters), power cord, remote control
Main specifications: output 80W x 2ch (4Ω) output terminal subwoofer x 1/headphone x 1/input terminal LINE x 2/COAXIAL x 1/OPTICAL x 2/USB x 1 digital input USB maximum 192 kHz/24 bit COAX/OPTICAL maximum 192 kHz/24 bit other Bluetooth audio compatible (A2DP with aptX) W214 x H60 x D284 mm mass 2.8 kg
The price has been drastically reduced! 2023/5/16 sales price 118,000 yen with LS STAND 70 (list price 48,000 yen). This model won the Audio Famous Equipment Award 2005 Speaker System Small Category Award. An excellent balance between the robustness of the enclosure and the suppleness of the unit group. A practical model with attractive spatial expressiveness and accurate sound images that don't make you aware of the presence of a speaker. There are scratches and bumps on the exterior. Serial 37038E002557/37038E002558 (Yonejima Satoshi)
Maintenance information: 2024.5.15 sweep test good
Accessories: instruction manual saran net spike fixing screw
Main specifications: 2-way bass reflex woofer 115mm aluminum hybrid cone tweeter JETIII crossover frequency 3,000 Hz input rating 70W/maximum 90W frequency characteristics 42-50,000 Hz efficiency 86dB impedance 4Ω dimensions W123 x H208 x D282 mm (when grille attached) weight 6.5 kg LS STAND 70: H700 x W240 x D290 mm top plate W75 × D210mm weight 6kg/set
Mono exclusive MC cartridge. It's not flashy, but it stretches and makes a gentle sound that is pleasant. There is a feeling of use such as dullness (Daiki Goto)
Maintenance information: 2024.5.13 operation confirmed
Accessories: original box, instruction manual
Main specifications: MC type 0.5 mV needle pressure 2.5 to 4.5 g dead weight 5 g
XLT (female) -TRS cable 0.9 m pair This cable is recommended for those using commercial equipment (Tamura Eiji)
Maintenance information: 2024.5.19 continuity confirmed
Accessories: No accessories
Flat speaker with 600 neodymium magnets. It is built into a self-made enclosure. It is an audio speaker that is mainly used outdoors for station announcements and as a large digital signage product for outdoor use. As for the exterior, there are screw holes in the top plate, and there are dullness and small scratches all over (Yonejima Satoshi)
Maintenance information: 2024.5.18 sweep test good
Accessories: No accessories
Main specifications: MCMA multi-cell flat speaker impedance 8Ω frequency specification 90Hz to 10kHz W270 x H375 x D205 mm 5.2 kg [actual measurement)
Fidelity-Research headshell Lightweight and highly rigid. It is characterized by an enveloping shape with a thick aluminum press-processed body. There are dullness and small scratches on the exterior (Murakoshi Yoichi)
Maintenance information: 2024.5.19 continuity confirmed
Accessories: none
Main specifications: aluminum stamping dead weight 10g
3P inlet plug Pure copper with high conductivity is used for the blade to ensure rigidity. The contacts are models that use rhodium plating treatment and α-process treatment (ultra-low temperature treatment & special electromagnetic field treatment). (TAMURA Eiji)
Accessories: case
GT SONIC's compact ultrasonic cleaner for commercial use. It's not for audio only, but it seems that it can be used for quite a variety of purposes. I think the size is good too. If you've been looking for one, take this opportunity. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.14 Operation confirmed
Accessories: power cord, original box
Main specifications: ultrasonic power consumption 150 W power supply AC 100-120 V 50/60 Hz ultrasonic frequency 40,000 Hz cleaning tank size: W155 x H150 x D300 mm body size: 180 x 310 x 330 mm 5.9 kg
Maintained! A network using excellent parts such as high-voltage nonpolar capacitors and coils using low-loss Orient Cores. The cross is easy to use at 500 Hz, and it is a very easy to use network for those who are assembled with drivers such as 375 (Asaine Tomoho)
Maintenance information: 2024.5.16 Maintained (12 terminal terminal mounting screws, 24 insulation bushings, terminal part cleaning, main unit internal check, attenuator VR replacement, crossover check)
Accessories: none
Main specifications: 2 way network, 500 Hz, 8 ohms
The disposal price has been reduced! (Member discounts are not applicable) 2024/4/28 sales price 89,800 yen Maintained! You can enjoy voluminous bass with highly efficient and heavy cone paper. It is also durable with a gathered edge, and is also recommended for backload and front load enclosures. The exterior has a feeling of use such as dullness and paint peeling. Serial 10904 10896 (Hiroki Aso)
Maintenance information: 2024.4.27 Maintained (center cap replacement, corn paper coating, edge damping agent applied)
Accessories: none
Main specifications: rated input 150 W frequency characteristics 30 Hz to 2 kHz 16 ohms efficiency 96 dB crossover frequency 800 Hz recommended enclosure volume 170 to 225 liters depth 146 mm 7.5 kg