The price has been reduced. 2024/4/8 sales price 15,000 yen balance cable 1.5m pair standard AccuPhase balance cable. It is a natural sound that removes disguise to enhance the characteristics of amplifiers and players. On the exterior, the cover at the base of the plug is damaged, and there is a feeling of use such as dullness (Hiura Katsuji)
Maintenance information: 2024.4.8 continuity confirmed
Accessories: none
The price has been drastically reduced! 2024/5/4 sales price 298,000 yen Maintenance was completed in 2023/6. Accuphase's first mono power amplifier. It's a rugged and firm 70's accuphase sound that is backed up by its exterior. It features crisp, tight bass and good sharpness in the mid to high frequencies. It is a gem where you can also enjoy the depth of the mid to high range unique to mono. The exterior has dullness etc. depending on the age. Serial J5Y280/J5Y279 (Yonejima Satoshi)
Maintenance information: 2023.6.13 Maintained (NF circuit capacitors, coupling capacitors, resistor replacement, deterioration replacement. lamp replacement. Card edge contact cleaning. ATT contact polishing cleaning contact protection oil application. Increase and tighten the output elements. Pattern and solder correction. Output relay check (good because it has been changed to a sealed type) bias and offset check. Output audio check)
Accessories: power cable
Main specifications: 450W (4Ω) 300W (8Ω) 150W (16Ω) W482 × H170 × D345 mm 27 kg
※The exterior is in poor condition, so it's cheap. This is Altech's classic 1 inch 4 sectional horn. With a 1-inch driver of your choice, such as the 802-8D, you can enjoy the horn sound unique to Altec with good sharpness. The exterior has peeling paint and damage such as scratches and tape marks (Satoshi Yonejima)
Accessories: No accessories
Main specifications: crossover 500 Hz directional horizontal 90 x vertical 40 throat diameter 250 mm W600 x H270 x D 486 mm 6.7 kg
※The exterior is in poor condition, so it's cheap. 1 bottle only. Altec green horns were also used in the early A7. While it has wide diffusion characteristics, it is an attractive horn because it is easy to listen to where you can feel the core. The exterior is dull, scratched, and peeling paint (Yonejima Satoshi)
Accessories: No accessories
Main specifications: 800Hz crossover frequency compatible driver 802-8D, 806-8A, 807-8A W470 × H220 × D340 mm 4.1 kg
※Since it is for business use, it will be handed over as is. Genuine Hibino. Amcron commercial amplifier. It is compatible with high and low impedance and is compatible with flexible system designs. It is a lightweight yet high-power car. The exterior is dull and dirty. ※Please use a dedicated terminal for input. Serial 8001225830 (Tamura Eiji)
Maintenance information: 2024.5.8 operation confirmed
Accessories: power cable, instruction manual (English)
Main specifications: 300W+300W (8Ω) frequency characteristics 20Hz to 20kHz W483 × H89 × D382 mm (excluding protrusions) mass 10.3 kg
※Since it is for business use, it will be handed over as is. Genuine Hibino. Amcron commercial amplifier. It is compatible with high and low impedance and is compatible with flexible system designs. It is a lightweight yet high-power car. The exterior is dull and dirty. ※Please use a dedicated terminal for input. Serial 8001612044 (Tamura Eiji)
Maintenance information: 2024.5.8 operation confirmed
Accessories: power cable, instruction manual (English)
Main specifications: 300W+300W (8Ω) frequency characteristics 20Hz to 20kHz W483 × H89 × D382 mm (excluding protrusions) mass 10.3 kg
Speaker cable 3.3 m pair Speaker cable using Audio Technica's signature technology PCOCC conductor+ceramic insulator. The exterior is dull and dirty due to use over time (Asaine Tomoho)
Maintenance information: 2024.5.7 continuity confirmed
Accessories: none
A basic model in the best-selling AT100 series. The glossy sound quality makes classical and female vocals full of sex appeal. The cantilever is bent slightly to the right (Kanai Hidetsugu)
Maintenance information: 2024.5.4 sound output confirmed, the cantilever bends slightly to the right
Accessories: none
Main specifications: VM type playback frequency band 8 to 20,000 Hz output voltage 4.0 mV needle pressure 1.4 g weight 6.6 g
Audio-Technica Shell Keeper, commonly known as Tri-Capsule. 3 bottles can be stored with the headshell attached (Asaine Tomoho)
Accessories: none
Main specifications: W152 x H88 x D50 mm 120 g
Speaker cable, 5,0m pair, untreated ends, an introductory cable that is soft and easy to run. The medium range is easy to hear and has a sense of volume, making it perfect for upgrading from accessories. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Maintenance information: 2024.4.19 continuity confirmed
Accessories: none
This classic headshell is made of magnesium alloy and has an attractive, unobtrusive sound. Overhang and left and right tilt adjustments are possible (Kanai Hidetsugu)
Maintenance information: 2024.5.4 sound output confirmed
Accessories: none
Main specifications: dead weight 10g
*Currently sold. Slim small 2-way speaker It is an SP originally developed for AV surround, but its high quality deserves attention. It has a quality that can be used for various purposes as a sub or desktop. There are large and small dents on the exterior and the saran net on one side, and a feeling of use such as dullness, abrasions, etc. can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.5.2 operation confirmed
Accessories: none
Main specifications: 2 way 3 speakers, bass reflex type, anti-magnetic type, 57mm woofer x 2, 57mm tweeter x 1, frequency characteristics, 75 Hz to 20 kHz, impedance 6 ohms, dimensions W85 x H405 x D100 mm, weight 2.6 kg
B&W bookshelf sized speakers It is equipped with a Nautilus tube and Kevlar cone unit from the higher series. This size is sufficient for clean mid to high ranges and low frequencies without any habit. It goes well with modern sauces. The jumper plate is dull, and there is a small scratch on the upper corner (Daiki Goto)
Maintenance information: 2024.5.7 operation confirmed
Accessories: instruction manual
Main specifications: 2 way 16.5 cm woofer 8 ohm bi-wiring connection possible W204 x H356 x D244 mm 6.1 kg
Speaker cable, 1.5 meter pair, banana plug specification, is a staple professional cable. Oxygen-free copper (OFC/JIS-H3510) is used as the conductor, and the 4-core structure reduces radiation noise. Polyethylene, which has a low dielectric constant, is used as an insulator to ensure excellent frequency characteristics. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.20 Continuity confirmed
Accessories: none
If you are looking for an AV switch selector, 4 ports, 4 inputs, 1 output, please take this opportunity. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.26 continuity confirmed
Accessories: instruction manual, original box
Main specifications: W136 x H43 x D88 mm 231 g (actual measurement)
Denon's classic shell. This is a genuine DA-305 shell. There is also plenty of room around the lead wire, and various cartridges can be attached. There is a feeling of use on the exterior such as small scratches and dullness (Tamai Jun)
Maintenance information: 2024.4.19 sound output confirmed
Accessories: none
Main specifications: dead weight 7g
This is a genuine shell that comes with the DP-1300M/DP-500M. Black model with meat removal processing. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Maintenance information: 2024.4.19 sound output confirmed
Accessories: none
Speaker cable 1.4+2.9 m pair end This is a well-balanced speaker cable, from powerful, unprocessed bass to delicate light sounds. There is a feeling of use such as dirt (Asae Tomoho)
Maintenance information: 2024.4.19 continuity confirmed
Accessories: none
The price has been reduced! 2024/5/2 Denon's premium analog player model with a sales price of 99,800 yen. The cabinet with a natural wood veneer semi-gloss finish accentuates the beautiful design. It is a stable player that uses a large die-cast aluminum turntable and quartz lock servo. It is also possible to change the cable and aim for an upgrade. Externally, there are bumps and scuffs on the dust cover. Serial 1066302271 (Fujisawa Yukishi)
Maintenance information: 2024.5.2 operation confirmed
Accessories: instruction manual, power cord, connection cord, head shell
Main specifications: Servo-type direct drive system rotation/33/33/45 rpm wow flutter/ 0.1% or less static balance S-shaped pipe arm effective length 244 mm overhang 14 mm needle pressure adjustment range 0 to 4.0 g compatible cartridge 14.0 to 20.0 g (including headshell) W490 x H178 x D400 mm 14.5 kg
※1 bottle only. Super tweeter using an aluminum alloy thick cylindrical horn and an ultra-lightweight ring diaphragm. It expands the well-stretched, clean high frequency range. There are small scratches and dullness on the exterior. (YONEJIMA Satoshi)
Maintenance information: 2024.5.8 oscillator check is good
Accessories: pedestal, instruction manual
Main specifications: Alnico magnet, 8Ω, playback frequency band, 5kHz to 35kHz, output sound pressure level, 106dB, recommended crossover, 7kHz or higher, input 50W, 800g/book
Fostex 1dB step transformer attenuator. It uses a large single-turn transformer and a highly reliable rotary switch with low contact resistance. The input/output terminals are tight-fitting. The exterior has oxidation, square peeling, etc. (Tamura Eiji)
Maintenance information: 2024.5.8 operation confirmed
Accessories: none
Main specifications: 8Ω allowable input 100W (when using a network) attenuation 0 to 12 dB size W88 x H90 x D170 mm approx. 970 g
※1 bottle only. Fostex 1dB step transformer attenuator. It uses a large single-turn transformer and a highly reliable rotary switch with low contact resistance. The input/output terminals are tight-fitting. The exterior has oxidation, dullness, etc. (Tamura Eiji)
Maintenance information: 2024.5.8 operation confirmed
Accessories: none
Main specifications: 8Ω allowable input 100W (when using a network) attenuation 0 to 12 dB size W88 x H90 x D170 mm approx. 970 g
RCA-XLR female cable 1.0m pair No. 2 HOT specification; details are unknown, but it seems to be well-made and easy to use. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Maintenance information: 2024.5.4 continuity confirmed
Accessories: none
Hamilex compact 4-tier rack. The design is simple and you won't get tired of it. The shelves can also be adjusted, making it easy to use. There are bats and scratches on the exterior (Murakoshi Yoichi)
Accessories: none
Main specifications: Top plate load capacity: 100 kg or less Shelf board load capacity 50 kg or less Bottom plate load capacity 100 kg or less Total load capacity 250 kg W591 x H735 x D550 mm Weight 31.5 kg
* Since it has been replaced with an external plug, it is inexpensive. RCA cable, 1.0 m pair, LC-OFC class 1 conductor, has been produced for over 10 years, and is a long-selling product balance capable of pure signal transmission. It is a cable with flat, tight bass and a smooth high-frequency luster. It rubs against the sheath and is dirty (Kojima Yosuke)
* Since it has been replaced with an external plug, it is inexpensive. RCA cable, 1.0 m pair, LC-OFC class 1 conductor, has been produced for over 10 years, and is a long-selling product balance capable of pure signal transmission. It is a cable with flat, tight bass and a smooth high-frequency luster. It rubs against the sheath and is dirty (Kojima Yosuke)
Accessories: none
The price has been reduced. 2024/4/6 sales price 79,800 yen Maintained! Standard model of JBL's 1-inch driver unit. The playback band is wide, so you can enjoy changing the network cross freely. The toughness, sound pressure, and full-bodied mid-high sound are attractive for some input. The diaphragm is original, and there are scratches in places (Kojima Yosuke)
Maintenance information: 2024.4.6 maintained (diaphragm installation adjustment
Replace the following parts. DCR (37658/6.1 ohm diaphragm no scratch) DCR (38816/5.7 ohm diaphragm no scratch)
Accessories: none
Main specifications: 1 inch driver 500 to 20,000 Hz 8 ohms serial 37658/38816 W145 x D97 mm 5.1 kg/bottle
※1 bottle only. Shorthorn used in the 43 series. It can also be built into an enclosure, but it makes you hear good sound even when attaching a driver and placing it on top of the enclosure. There are paint peeling and scratches on the exterior (Yonejima Satoshi)
Accessories: No accessories
Main specifications: 80 degrees horizontal orientation for 1-inch drivers, 45 degrees vertical, recommended crossover 1.2 kHz, baffle opening diameter 108 mm, depth 216 mm
The disposal price has been reduced! Members are not eligible for discounts. 2024/4/26 sales price 498,000 yen It is an ambitious K2 series mid-range model that inherits the characteristics of the S9500. The dynamic sound quality that makes use of the horn stands out for the strength of the sound image. The sound is lively and full of life, and the realism of the bass is outstanding. The exterior has line marks and dullness. Serial J1240-010742, J1240-010709 (Fujisawa Yukishi)
Maintenance information: 2024.4.26 operation confirmed
Accessories: saran net, jumper plate
Main specifications: 2 way 3 speakers · bass reflex system · tall boy type 30 cm cone type (LE125S) x 2 high range horn type (275Nd) frequency characteristics 35 Hz to 20,000 Hz output sound pressure level 95 dB impedance 4 Ω maximum allowable input 150 W crossover frequency 800 Hz W499 x H1,254 x D412 mm 89kg/1
The disposal price has been reduced! (Member discounts are not applicable) 2024/4/18 sales price 79,800 yen with MA15 woofer fixing bracket! ORIGINAL A floor-type enclosure that uses a rear-loading horn system. The interior has a folding horn structure with a total length of 2 meters, making it possible to reproduce powerful bass far exceeding its size. The exterior has chipped corners, scratches, repair marks, and paint peeling. Serial 11154 (Tomoho Asaine)
Accessories: MA15 woofer grill net
Main specifications: hole diameter 365 mm, screw pitch 420 mm backroad horn compatible speakers 2205, 2225, E140 minimum playback frequency 50 Hz main material particle board+Yonematsu laminated plywood (front baffle/road horn) W603 x H12 x D603 mm approx. 54 kg
The price has been drastically reduced! 2024/4/28 sales price 79,800 yen Maintained! The classic model for professional 1" screwdrivers. It is a driver that is installed in many of the company's 43 series, etc., and is easy to balance even when combined with various woofers and tweeters. The exterior has a feeling of use such as dullness, small scratches, and abrasions (Asaine Tomoho)
Maintenance information: 2024.4.28 Maintained (diaphragm installation adjustment
Replace the following parts DCR (no scratches on the 164164/6.3 ohm diaphragm)
DCR (63913/6.4.ohm diaphragm, no scratches))
Accessories: none
Main specifications: 1 inch driver, throat diameter: 25 mm, 16 ohms (measured 10/12 ohms), 118 dB, frequency characteristics, 800 Hz to 20 kHz, crossover frequency: 500 Hz or more, 5.1 kg
An acoustic lens mounted on JBL monitor speakers such as the 4343 series. By attaching it, the sound of a horn that is too strong is moderately diffused and calmed down. There is dirt, dullness, etc. (Oikawa Tetsuji)
※Inexpensive because it is in slightly poor condition. Super tweeter with built-in network capable of playback up to 70kHz. You can select where to connect the high frequency range from 3 types of input. You can use it simply by placing it on top of a normal speaker and connecting it as is. The bright, clear high frequencies and carefree tone are the perfect match for JBL speakers. In addition to the exterior, there is a light float on the front baffle joint surface on one side, and a feeling of use such as dullness, abrasions, etc. can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.5.4 operation confirmed
Accessories: none
Main specifications: 25mm sintered carbon graphite dome tweeter playback frequency band FC to 70kHz crossover 12kHz/16kHz/22kHz impedance 5Ω sound pressure level 90dB dimensions W190 x H130 x D130 mm weight 1.3 kg
JBL's exponential horn. Since it is a longhorn, it can be used at low crossover frequencies. Together with an acoustic lens, it is possible to create a monitor sound with high directivity. The exterior has bald paint, dirt, etc. Serial 20444/20547 (Tamura Eiji)
Accessories: none
Main specifications: crossover frequency 800 Hz sound pressure level 108 dB (using 2308 lenses) throat diameter 2.5 cm diameter 156 x D 293 mm weight 1 kg/book
The disposal price has been reduced! (Member discounts are not applicable) 2024/3/29 sales price 138,000 yen Sneaky DSM with built-in network player function and 2ch amplifier has arrived. It has a smart design that eliminates anything superfluous, and can be operated with an iPod or the like. Of course, it also has an excellent external input function. There are some minor scratches on the exterior. Genuine Rin Japan. Serial 1333455 (Tomonori Asaine)
Maintenance information: 2024.3.29 Operation confirmed
Accessories: Speakon remote control power cable setup manual
Main specifications: analog input: RCA1 system digital input: coaxial, 1 optical system, 3 HDMI output, 1 HDMI system*RCA has variable output and fixed output can be changed by setting Compatible files: FLAC, WAV, Apple Lossless, AIFF, MP3, WMA, AAC, OGG Compatible Bits: 16 to 24 bits 33W ✕ 4ch (4Ω) W350 ✕ H54.5 ✕ D215mm Weight 2.3 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/4/24 sales price 1,180,000 yen genuine Rin Japan product. DS (digital streaming), which has now become mainstream, is named with an acronym such as M (music, movie, multi-source, mobile, multi-user), etc., and not only reproduces PC sound sources via a network, but also becomes a controller that manipulates various sound sources. While it functions as a network player, it has various functions that support everything from analog input to digital input. The exterior has insulator marks on the top plate. Serial 1374093 (Yonejima Satoshi)
Maintenance information: 2024.2.13 operation confirmed (Software Ver. 4.104.518)
Accessories: remote control, instruction manual, power cable, original box
Main specifications: Support files: FLAC, WAV, ALAC, AIFF, AAC, MP3, WMA compatible sampling frequency: 44.1 to 192 kHz Compatible bits: 16-24 bit Input terminals: Ethernet, 1 XLR balanced input system, 1 Spdif coaxial digital input system, 2 Tos optical digital input systems, 3 HDMI input systems Output terminals: 1 XLR balanced output system, 1 RCA unbalanced output system, HDMI Output (pass-through) 1 system, equipped with EXAKT LINK 2 systems, W350 x H60 x D344 mm, 10 kg