Audio-Technica connectable cartridge capsule. One can be stored while the headshell is attached. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: W51 x H85 x D51 mm 36.3 g (actual measurement)
Audio-Technica connectable cartridge capsule. One can be stored while the headshell is attached. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: W51 x H85 x D51 mm 36.3 g (actual measurement)
Audio-Technica connectable cartridge capsule. One can be stored while the headshell is attached. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: W51 x H85 x D51 mm 36.3 g (actual measurement)
Audio-Technica connectable cartridge capsule. One can be stored while the headshell is attached. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: W51 x H85 x D51 mm 36.3 g (actual measurement)
*Only the 2ch simple test is inexpensive because the video system has not been checked, and is currently sold. Denon AV amplifier. Please use it to build a theater system. There is unevenness in the brightness of the LCD (Oikawa Tetsuji)
Maintenance information: 2024.5.28 Operation confirmed (2ch simple test only, video system not checked)
Accessories: power cable, remote control, instruction manual, FM/AM antenna
Main specifications: ● Rated output/front: 140W+140W, center: 140W, surround: 140W+140W, surround back: 140W+140W, front height/width: 140W+140W (8Ω, 20Hz to 20kHz, THD 0.05%) W434 x H171 x D414 mm 17.3 kg
※Since it is cheap, it will be handed over as is. DSD compatible network audio player. Equipped with WIFI, the D/A converter is compatible with DSD 5.6 MHz and 192 kHz/32 bit, the same as those used in super audio CD players. It is a model with high cost performance. Recommended for those getting started with network audio. There is a line wound. The remote control is out of stock (Oikawa Tetsuji)
Maintenance information: 2024.5.28 Operation confirmed
Accessories: instruction manual, power cable
Main specifications: DSD (2.8 MHz/5.6 MHz) AIFF (192 kHz/24 bit) AIFF, WAV, FLAC (192 kHz/24 bit) Apple Lossless (96 kHz/24 bit) wireless LAN standard IEEE 802.11b, IEEE 802.11g, IEEE 802.11n compliant W434 x H73 x D297 mm 2.9 kg
※Some glass doors are out of stock. Audio rack with casters of unknown model number and details. The shelves are adjustable with dowels. Overall, there is a feeling of use such as scratches, dirt, and seal marks. Shipping costs will be estimated separately (Daiki Goto)
Accessories: none
Main specifications: W1130 x H1010 x D470 mm Approximate weight 60 kg
*The remote control is out of stock, so it is cheap and is currently sold. An entry model with excellent cost performance. Since it comes with a phono circuit, you can also enjoy records. The sound quality is stable in both digital and analog. There are small wounds and dullness (Oikawa Tetsuji)
Maintenance information: 2024.5.28 Operation confirmed
Accessories: none
Main specifications: 50W+50W (8Ω) line input 4 phono 1 system (MM) with pre-out terminal W434 x H121 x D308 mm 7.1 kg
* There are adhesive marks on the main body, the tweeter is dead, etc., so it is inexpensive and is currently sold. If you're a Technics fan, you should try the SB-7000 at least once! It is made with a linear phase design and expresses excellent directivity. Although it is flat and has a wide range, it is highly efficient, so it can handle a full range of genres regardless of the amplifier. The exterior has adhesive marks, dirt, and small scratches. Shipping costs will be estimated separately (Oikawa Tetsuji)
Maintenance information: 2024.5.28 Operation confirmed
Accessories: none
Main specifications: 3-way bass reflex 6Ω 93dB linear phase speaker system W480 x H845 x D410 mm 36 kg
Comes with original box This is the third headphone in the Hifiman sealed series. Inheriting the traditional goodness of the classic model SUNDARA, it has achieved a large sound field that looks like an open type while being sealed. I have the impression that it mellows down from low to high frequencies. It is in good condition with little feeling of use (Oikawa Tetsuji)
Maintenance information: 2024.5.28 Operation confirmed
Accessories: original box, connection cable
Main specifications: sealed type 20Ω 98dB 432g
The price has been drastically reduced! 2024/5/27 sales price 398,000 yen A popular model equipped with a diamond tweeter that rewrote the history of the 800 series. The color is rose. The excellent stretch that penetrates the high range without habit and the sense of volume in the mid to low range, which has a strong presence, are appealing not found in the current D3. The exterior has dullness, small scratches, and stickiness on the bass reflex. Serial 0012701 0012702 (Asaine Tomoho)
Maintenance information: 2024.5.27 sound output confirmed
Accessories: saran net jumper cable
Main specifications: 2 way 2 speakers bass reflex diamond dome tweeter 8 ohm crossover 4 kHz frequency characteristics 42 to 33 kHz W238 x H418 x D351 mm 12 kg
An audio selector that allows you to easily switch between a total of 3 devices. Comes with a front input terminal. Compatible with φ3.5 stereo mini You can see a feeling of use such as appearance, dullness, scratches, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: 3 input terminals (φ3.5 mm stereo mini, audio L/R), 1 output terminal (φ3.5 mm stereo mini, audio L/R) W190 x D85 x H32 mm approx. 210 g
JVC AV selector. Devices such as 4 systems of players can be connected. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.23 Continuity confirmed
Accessories: none
Main specifications: 4 systems (input 1 to 4 video/audio L/R) output terminal 1 system (video/audio L/R) video frequency band 10 MHz W170 x H40 x D78 mm approx. 187 g
Unspecified pair of black granite boards. There are slits in the front and back that seem to be for tuning purposes. If you're looking for this size, go ahead. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
Main specifications: W245 x H15 x D245 mm 2.8 kg
*Currently sold. The 13 cm cone-shaped woofer is equipped with an OMF diaphragm made of natural materials, and is specially designed, such as using a German WIMA capacitor for the network, so you can enjoy solid sound with high cost performance. You can see the exterior, dullness, dirt, abrasions, etc. and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.25 Operation confirmed
Accessories: saran net
Main specifications: anti-magnetic design 2-way bass reflex woofer 13 cmOMF diaphragm tweeter 2.5 cm soft dome rated impedance 4 Ω maximum input 70 W rated sensitivity level 85 dB/w/m rated frequency range 50 Hz to 35 kHz W170 x H295 x D232 mm 3.8 kg
Cover is missing. Unspecified digital needle pressure gauge. It is a digital needle pressure gauge that can measure up to 5g in 0.01 g increments. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.23 Operation confirmed
Accessories: none
※It is inexpensive because there are many abrasions, stains, etc., and there is a feeling of use. A classic disc stabilizer. Moderate weight gives a sense of stability to record playback (Kobayashi Hitoshi)
Accessories: none
It is a set of a directional velvet brush with high cleaning performance and a cleaning liquid that suppresses static electricity, but there is no liquid left. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
Key Specifications: Cleaning Kit Wide Type
This is a wet cleaner for cords. A wide type that can wipe down the surface of an LP record. In addition to the appearance and yellowing, dullness and a feeling of use can be seen (Kobayashi Hitoshi)
Accessories: none
A record cleaner that indirectly imparts moisture to the case by adsorbing liquid onto the sponge inside the case. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
*Currently sold. DAITO Voice 16cm full range unit. If you were looking for it, please go ahead (Kobayashi Hitoshi)
Maintenance information: 2024.5.27 Operation confirmed
Accessories: original box
Main specifications: 8Ω 10W maximum 15W 16cm full range
*Currently sold. DAITO Voice 10cm full range unit. If you were looking for it, please go ahead (Kobayashi Hitoshi)
Maintenance information: 2024.5.22 Operation confirmed
Accessories: original box
Key Specifications: 4Ω 15W 10cm full range
Refresh yourself with interior and exterior maintenance! A gray-finish model of the king monitor 4343B. The balance between thick, strong mids and responsive bass is perfect. A model that wants to make jazz and rock sound thick, thick, and powerful. It's an exhilarating sound. The exterior has been beautifully finished due to maintenance (Tomoho Asaine)
Maintenance information: 2024.5.27 Maintained (exterior repair/all coated saran frame processing correction repair/net replacement, plate maintenance repair, plate maintenance (edge replacement, cone paper coating, center cap replacement)) midmaintenance (edge replacement, cone paper coating, center cap replacement, driver maintenance (magnetic circuit rust removal/gap cleaning/center adjustment, sound absorbing material replacement, terminal cleaning/screw replacement) Tweeter maintenance (magnetic circuit rust removal/gap cleaning, terminal cleaning/screw replacement, exterior painting) horn painting, diffuser repair/painting, baffle plate cleaning unit detachable network maintenance: frequency characteristic check, ATT cleaning, switching SW/terminal cleaning/screw replacement)
Accessories: diffuser saran net
Main specifications: 4 way 4 speaker bass reflex crossover 300 Hz/1,250 Hz/9,500 Hz impedance 8 Ω 93 dB dimensions W635 x H1,051 x D435 mm weight 83.9 kg/1
The price has been reduced! 2024/5/27 sales price 748,000 yen, beautiful item with original box, first arrival at Hi-Fi! A belt drive analog player equipped with a completely original tone arm and extreme performance. The combination of a newly developed original tone arm with extremely high initial motion sensitivity using knife-edge bearings, a quiet DC motor supported by a powerful power source, and a belt drive system brings an emotional playback sound with high fidelity. The exterior is generally good. Serial M30500158 (Tomonori Asaine)
Maintenance information: 2024.5.27 Operation confirmed
Accessories: original box, instruction manual, handle, hex wrench, power cable, phono cable, EP adapter
Main specifications: belt drive system, rotation speed 33/45/78, switchable platter mass 5.2 kg, tone arm type, static balance, S-shaped universal type, knife edge structure, effective length 256 mm, overhang 16 mm, compatible cartridge 4 to 11 g (17 to 24 g with attached headshell), height adjustment range 22 g, anti-skating 0 to 4 g, power supply voltage AC100V (50/60 Hz) power consumption 5W external dimensions W491 x H128 mm (from bottom to top of turntable) x D399 mm mass 24.8 kg (main body)
Denon high-end MC cartridges in the heyday of analog, using amorphous boron pipes. A sound with a wide range and good separation, which has a different trend from the standard 103 series. This is the reference cartridge at the time. There is slight dirt and a feeling of use. (FUJISAWA KOSHI)
Maintenance information: 2024.5.27 Operation confirmed
Accessories: instruction manual, needle cover
Main specifications: MC type output 0.2 mV 40 ohm boron cantilever solid diamond special oval needle playback band 20 to 75 kHz proper needle pressure 1.0 to 1.4 g dead weight 5.8 g
The higher model of the DL-103. Wide range was measured, and 20 Hz to 70 kHz was achieved. Delicate, wide, and powerful sound quality. There is slight dirt and a feeling of use. ※There is a note on the original box. (FUJISAWA KOSHI)
Maintenance information: 2024.5.27 Operation confirmed
Accessories: instruction manual, original box, needle cover
Main specifications: MC type output 0.2 mV playback frequency 20 to 70,000 Hz impedance 40 ohms needle pressure 1.2 g dead weight 6.5 g
LUXMAN MC cartridge demagnetizer is easy to use. Plug in the cartridge shell, press the switch, and the 2 indicators go off, and you're done. *Never use MC cartridges or MM cartridges that use print coils. (FUJISAWA KOSHI)
Maintenance information: 2024.5.27 Operation confirmed
Accessories: original box
Main specifications: W120×H44×D56mm 250g
Popular ceramic shell. A beryllium copper washer and a three-point crimping system are used at the arm joint. The overhang can be adjusted by means of a slide plate on the top. (FUJISAWA KOSHI)
Maintenance information: 2024.5.27 continuity confirmed
Accessories: No accessories
Main specifications: sintered aluminum oxide body, 3-point crimping type, weight 18 g
Popular ceramic shell. A beryllium copper washer and a three-point crimping system are used at the arm joint. The overhang can be adjusted by means of a slide plate on the top. (FUJISAWA KOSHI)
Maintenance information: 2024.5.27 continuity confirmed
Accessories: No accessories
Main specifications: sintered aluminum oxide body, 3-point crimping type, weight 18 g
SPU-A shell conversion plug It is an adapter that allows short pitch A-shell cartridges to be attached to general tone arms. There is a slight dullness. (FUJISAWA KOSHI)
Maintenance information: 2024.5.27 continuity confirmed
Accessories: No accessories
A classic Technics headshell. Aluminum die-cast body with excellent vibration damping properties (Oikawa Tetsuji)
Accessories: screws
Main specifications: Weight 9.2 g
A compact and lightweight flat front biladial horn. It keeps horizontal characteristics constant and is useful for correcting driver characteristics (Daiki Goto)
Accessories: none
Main specifications: 25 mm throat diameter, compatible driver, 2426H/J, use minimum frequency of 500 Hz, recommended minimum crossover frequency of 630 Hz, made of high-density polyurethane, W448 x H173 x D 174 mm, 1.4 kg
Sony die-cast aluminum shell. While it is sturdy, it has a smart design and is easy to use (Oikawa Tetsuji)
Accessories: none
Main specifications: die-cast aluminum, 10.5g dead weight
Beautiful item with original box! Equipped with a new amplifier circuit “LIFES Version 1.0,” the grain of the sound and sense of realism have become even more prominent while retaining the natural and gentle sound of the old model. They seem to handle all genres flawlessly. The appearance is good with little feeling of use. Serial G20800253A (Tomonori Asaine)
Maintenance information: 2024.5.26 Operation confirmed
Accessories: remote control instruction manual, power cord, original box
Main specifications: rated output 110W+110W (8Ω) 220W+220W (4Ω) input sensitivity/input impedance PHONO (MM) 2.5mV/47kΩ, PHONO (MC) 0.3mV/100Ω, LINE 180mV/47kΩ, BAL.LINE 1
80 mV/79 kΩ, frequency characteristics PHONO 20 Hz to 20 kHz (within ± 0.5 dB) LINE 20 Hz to 100 kHz (within -3.0 dB) W440 × H178 × D454 mm 25.4 kg
This is a 5th generation digital voicing equalizer equipped with independent sound field correction and equalizer functions. Various connections are possible with various digital/analog input/output, including the company's unique HS-LINK. You can freely control the sound field and tone according to the environment. The exterior is also good with no particularly noticeable scratches. Serial C3Y418 (Tomonori Asaine)
Maintenance information: 2024.5.26 Operation confirmed
Accessories: Remote control instruction manual, power cord, connection cord, microphone stand, microphone cable, cross, original box
Main specifications: digital input (HS-LINK x 1 COAXIAL x 1 OPTICAL x 1) digital output (HS-LINK x 1 COAXIAL x 1 OPTICAL x 1) analog input (RCA x 1 XLR x 1) analog output (RCA x 1 XLR x 1) USB terminal USB 2.0/3.0 (up to 128 GB) ※ USB memory connection W465 x H161 x D396 mm weight 14.9 kg
The price has been reduced! 2024/5/26 sales price 1,080,000 yen with dedicated stand! It is packed with advanced technology such as a beautiful reverse wrap cabinet, a diamond dome tweeter, and a solid body tweeter on top, and you can hear a sound that is even sharper than the D3. There is some scuff on the exterior, but it is generally beautiful. Serial 2245-0007402-FP42161 2245-0007402-FP42161 (Tomoho Asaine)
Maintenance information: 2024.5.26 sound output confirmed
Accessories: dedicated stand, saran net jumper cable, instruction manual, foot spike
Main specifications: 2-way bass reflex type playback frequency band 34 to 35 kHz sensitivity 88 dB nominal impedance 8 ohms W240 x H440 x D373 mm 15.55 kg/book stand weight 13.4 kg (per watch)
)
The price has been reduced! 2024/5/26 sales price 138,000 yen A phono equalizer amplifier with a dual monaural fully balanced input/output circuit configuration compatible with MC cartridge balance input. The accurate RIAA phono equalizer pursues how close it is to the original sound before it is engraved on the board. In addition to the high-accuracy RIAA correction circuit, it is also compatible with DECCA and COLUMBIA EQ curves. Also, in addition to the load resistance of MC cartridges, it is also equipped with load capacity switching for MM cartridges, and settings can be made according to records and cartridges. Serial 2260031 (Tomonori Asaine)
Maintenance information: 2024.5.26 Operation confirmed
Accessories: instruction manual power cable (general-purpose product)
Main specifications: unbalanced input/RCA terminal (MC/MM combined use) x 1 system/input impedance/mm47kΩ, load capacity 0, 100, 220, 330pF MC/10, 22, 47, 100, 220, 470, 1 kΩ balanced input/XLR terminal (MC only) x 1 system/MC/10, 22, 47, 100, 220, 470, 1 kΩ W290 x H84.5 x D252.5 mm 4.5 kg
Current flagship aircraft! The circuit has been renewed from the previous D-08u, and the DAC is equipped with a ROHM high sound quality audio DAC and the analog circuit is equipped with an ODNF-U in a fully balanced configuration. Playback of MQA (MQA-CD/MQA files) is also fully decoded. The resolution, sound field, etc. make me listen to the dignity unique to the highest-end aircraft. The exterior is generally good with no noticeable scratches. Serial M20900311C (Tomoho Asaine)
Maintenance information: 2024.5.26 Operation confirmed
Accessories: remote control instruction manual copy power cable original box
Main specifications: Compatible discs: SACD, CD digital input: USB x 1 system, COAX x 1 system, OPT x 2 system Digital output: COAX x 1 system, OPT x 1 system Compatible sampling frequency: USB input (PCM) 44.1k to 768 kHz (16, 24, 32 bits) /USB input (DSD) 2.8 m to 22.4 MHz (1 bit) /USB input (MQA) 44.1K/48 kHz (24 bit), (MQA) Dollar mode) 88.2 K/96 kHz (24 bits) /COAX/OPT input 44.1 k to 192 kHz (16, 20, 24 bits)
High accuracy master clock generator. Equipped with a large toroidal core power transformer, the outline of the sound of your system is defined even more firmly with a stable, high-precision clock at all times. With TEAC's unique A4 size design, you don't have to worry about the location. The combination with the company's UD-503 and NT-503 is also a good design. * It becomes almost stable in about 2 minutes after turning on the power, but it takes about 10 minutes for it to completely stabilize. In terms of sound quality, it is recommended to wait at least 10 minutes before use. There is a feeling of use on the exterior, such as dullness and small scratches. Serial 22Y0008 (Tomonori Asaine)
Maintenance information: 2024.5.26 Operation confirmed
Accessories: instruction manual, original box, power cable
Main specifications: 4 crystal oscillating BNC output systems, output frequency 10 MHz, output impedance 50 Ω, output level 0.5 Vrms (sine wave) W290 x H54.5 x D248.7 mm (including protrusions) 3.6 kg
The price has been drastically reduced! 2024/5/26 sales price 298,000 yen Current belt drive type player equipped with Luxman's original tone arm. Dust coverless specification. The high initial motion sensitivity unique to knife-edge bearings, stable trace performance, and excellent sound quality delivered from a machined aluminum heavyweight platter are attractive. Despite its compact size, you can enjoy authentic analog sound. The appearance is good with little feeling of use. Serial M21000149 (Tomoho Asaine)
Maintenance information: 2024.5.26 Operation confirmed
Accessories: instruction manual, power cord, original box, shell screwdriver, 2 hex wrenches, handles
Main specifications: belt drive system PID controlled brushless DC motor 33 1/3 rpm, 45 rpm, 78 rpm switchable static balance, S-shaped universal type knife edge structure compatible cartridge dead weight 4 to 10 g (17 to 23 g including attached headshell) anti-skating 0 to 4 g W465 x H133 x D393 mm weight 15.8 kg
Beautiful item with original box! In addition to conventional MC/MM cartridges, this is a Soul Note all-in-one phono equalizer that can reproduce all types of cartridges compatible with DS Audio photoelectric cartridges. The fully balanced non-feedback circuit of the signboard technology is used. The bold sound, where you can feel the extrusion and power, is irresistible. The condition is generally good. Serial 23040008 (Tomoho Asaine)
Maintenance information: 2024.5.26 Operation confirmed
Accessories: instruction manual, power cable, spike, tool source box
Main specifications: input sensitivity MC0.4mV, mm4mV, opt50mV gain MC72dB, mm52dB, opt30dB rated output voltage BALANCE2.8V, UNBALANCE 1.4V MC load resistance 3Ω/6Ω/12Ω/24Ω/40Ω/100Ω MM load capacity 100P/200P/350P W430 x H160 x D410 mm weight 21 kg