*The stylus is a JICO VN35HE. Good stylus and cantilever. It combines the delicate expressive power unique to light needle pressure with an energetic, thick sound typical of Type 3. Recommended for those who listen to jazz and rock. The exterior is dull (Yonejima Satoshi)
Maintenance information: 2024.6.2 operation confirmed
Accessories: No accessories
Main specifications: mm type frequency range 10 Hz to 25,000 Hz output voltage 3.5 mV needle pressure 0.75 g to 1.25 g weight 6 g
Equipped with an original needle. A rare TYPE2 from the popular V15 series. Although it is MM, the resolution is high, and the power of the low frequencies and the ease of transmission are attractive. The exterior is dull and scratched. There is no such thing as needle bends (Murakoshi Yoichi)
Maintenance information: 2024.5.26 sound output confirmed
Accessories: none
Main specifications: mm type output 3.5 mV needle pressure 0.75 to 1.5 g dead weight 7 g
Popular ceramic shell. A beryllium copper washer and a three-point crimping system are used at the arm joint. The overhang can be adjusted by means of a slide plate on the top. (FUJISAWA KOSHI)
Maintenance information: 2024.5.27 continuity confirmed
Accessories: No accessories
Main specifications: sintered aluminum oxide body, 3-point crimping type, weight 18 g
Popular ceramic shell. A beryllium copper washer and a three-point crimping system are used at the arm joint. The overhang can be adjusted by means of a slide plate on the top. (FUJISAWA KOSHI)
Maintenance information: 2024.5.27 continuity confirmed
Accessories: No accessories
Main specifications: sintered aluminum oxide body, 3-point crimping type, weight 18 g
A headphone amplifier with a built-in DAC equipped with a renewed D/A circuit and 1 ESS Technology “ES9038Q2M” on the left and right. By using the DAC in mono mode, a high S/N value is obtained, and native playback of DSD 22.5 MHz and PCM 768 kHz/32 bit is realized. The exterior is good with no noticeable scratches. Serial 20Z0002 (Tomonori Asaine)
Maintenance information: 2024.5.26 Operation confirmed
Accessories: Remote control power cord (general purpose)
Main specifications: USB input 16 to 32 bit, 44.1 kHz to 768 kHz, DSD2.8 m to 22.5 MHz coaxial, optical digital input 16/24 bit, 32k to 192 kHz, DSD2.8 MHz (compatible with 176.4 kHz/24 bit DOP transmission) Inputs: USB B2.0, RCA, coaxial, optical x 2, coaxial 3.5mm mini, Bluetooth output: RCA, XLR, 6.3 mm standard x 2, 4.4 mm 5 poles Pentaconn W290×H84.5×D248.7mm 4.1 kg
※Operation not checked. This is a standalone remote control for the TRIODE TRV-A300XR. If you have been looking for it, please take this opportunity. There is an exterior, small wounds, and dullness (Kobayashi Hitoshi)
Maintenance information: operation unconfirmed
Accessories: none
Replacement needle for TRIO/KENWOOD cartridge V-39MKIII Since it is only a replacement needle, it has not been checked. (KOBAYASHI Hitoshi)
Maintenance information: operation unconfirmed
Accessories: none
Replacement needle for TRIO/KENWOOD cartridge V-37 It's unchecked because it's only an exchange needle (Kobayashi Hitoshi)
Maintenance information: operation unconfirmed
Accessories: original box
Replacement needle for TRIO and KENWOOD V-36 cartridges. Unchecked because it is only a replacement needle (Kobayashi Hitoshi)
Maintenance Information: Operation Unconfirmed
Accessories: original box
Replacement needles for T-30 and V-30 TRIO KENWOOD cartridges. Unchecked because it is only a replacement needle (Kobayashi Hitoshi)
Maintenance Information: Operation Unconfirmed
Accessories: original box
Hi-Fi's first Trilogue series subwoofer has arrived! Not only for those using the Trilogue speaker, it also demonstrates sufficient performance as a standalone unit. This is a spike specification. There are wrinkles on the exterior like wrap marks. Serial 30-07-00 (Tamura Eiji)
Maintenance information: 2024.5.30 Operation confirmed
Accessories: power cable, saran net, original box
Main specifications: built-in power amplifier, 2 speakers, bass reflex, built-in power amplifier output, 200W, high frequency cutoff frequency 40/50/60hz, W380 x H540 x D650 mm, weight 45 kg
Hi-Fi's first Trilogue series subwoofer has arrived! Not only for those using the Trilogue speaker, it also demonstrates sufficient performance as a standalone unit. This one is not compatible with spikes. The exterior has dullness and scratches. Serial 30-07-00 (Tamura Eiji)
Maintenance information: 2024.5.30 Operation confirmed
Accessories: power cable, saran net, original box
Main specifications: built-in power amplifier, 2 speakers, bass reflex, built-in power amplifier output, 200W, high frequency cutoff frequency 40/50/60hz, W380 x H540 x D650 mm, weight 45 kg
* Since there are difficulties with the attachment part on both sides, it is inexpensive. Line matching transformer sold primary: 600 ohms, output 10 dBm, frequency range, 50 to 10 kHz, W44 x H65 mm, 0.25 kg/piece, the head of the mounting bolt on one side is flying off, and there is distortion in the screw hole on the other side (Kojima Yosuke)
Accessories: none
Line matching transformer sold 1 piece Primary: 600 Ω - CT Secondary: 600 ohms Output 10 dBm Frequency Range 50 to 10 kHz W44 x H65 mm 0.25 kg/piece There are bumps and paint peeling in places (Yosuke Kojima)
Accessories: none
Line matching transformer sold 1 piece Primary: 600 Ω Secondary: 600 Ω Winding Ratio 1:1 Output 10 dBm Frequency Range 50 to 10 kHz W34 x H42 x D22 mm Approx. 0.1 kg (Yosuke Kojima)
Accessories: none
You can feel the dynamism typical of monsters with the 1.9 m pair end of the speaker cable that is unprocessed and inexpensive. (FUJISAWA KOSHI)
Maintenance information: 2024.4.12 continuity confirmed
Accessories: No accessories
The price has been reduced. 2023/6/1 sales price 25,000 yen A fully discrete genuine analog amplifier designed with an amplifier using a total of 10 pairs of carefully selected transistors without using an operational amplifier. It's lightweight, compact, and useful for portable applications. The exterior has scratches and scratches on the main body (Mizusaki Ryo)
Maintenance Information: 2023.6.1 Sound output confirmed
Accessories: AC adapter, USB cable, silicone band, carrying case, original box
Main specifications: input 3.5mm mini terminal output 3.5mm mini terminal input impedance 30kΩ output 200mW (32Ω) 100mW (50Ω) 50mW (300Ω) 15mW (600Ω) W97 x D46 x H19 mm (including volume knob) weight approx. 117 g
The disposal price has been reduced! (Member prices are not applicable) 2024/5/14 Torrens entry model with sales price 118,000 yen. Although it is an entry model, the silence and smoothness of the belt drive, and the delicate sound are attractive, and the tone arm is easy to adjust. Recommended for entry-level belt drive machines. There are a few small scratches on the exterior. Serial 00262803 (Fujisawa Yukishi)
Maintenance information: 2024.5.14 Operation confirmed
Accessories: copy of instruction manual, power cord, connection cord, spike base, original box
Main specifications: W420 x H125 x D330 mm 8 kg Drive system: belt drive motor: synchronous motor speed: 33 1/3, 45 rpm electronic speed selection platter: diameter 300 mm, 3 kg, aluminum power supply unit housing tone arm: static balance type
Equivalent to PIONEER PN-330M/2 PC-330/2 replacement needle It is unopened and operation has not been checked (Hiura Katsutsugu)
Maintenance information: operation unconfirmed
Accessories: original box
Equivalent to PIONEER PN-330M/2 PC-330/2 replacement needle It is unopened and operation has not been checked (Hiura Katsutsugu)
Maintenance information: operation unconfirmed
Accessories: original box
Equivalent to PIONEER PN-330M/2 PC-330/2 replacement needle It is unopened and operation has not been checked (Hiura Katsutsugu)
Maintenance information: operation unconfirmed
Accessories: original box
Equivalent to the HITACHI DS-ST55. Replacement needle for MT-55 It is unopened and operation has not been checked (Hiura Katsutsugu)
Maintenance information: operation unconfirmed
Accessories: original box
Equivalent to the HITACHI DS-ST55. Replacement needle for MT-55 It is unopened and operation has not been checked (Hiura Katsutsugu)
Maintenance information: operation unconfirmed
Accessories: original box
Replacement needle for XL-25 (A), equivalent to SONY ND-25E. It is unopened and operation has not been checked (Murakoshi Yoichi)
Maintenance information: operation unconfirmed
Accessories: original box
Replacement needle for XL-25 (A), equivalent to SONY ND-25E. It is unopened and operation has not been checked (Murakoshi Yoichi)
Maintenance information: operation unconfirmed
Accessories: original box
SONY ND-200G equivalent Replacement needle for XL-20G It has not been opened and the operation has not been checked (Kobayashi Hitoshi)
Maintenance information: operation unconfirmed
Accessories: original box
Sony ND-150G equivalent. XL-150G replacement needle It is unopened and operation has not been checked (Hiura Katsutsugu)
Maintenance information: operation unconfirmed
Accessories: original box
Sony ND-138G equivalent Replacement needle for VL-38G. It is unopened and operation has not been checked (Hiura Katsutsugu)
Maintenance information: operation unconfirmed
Accessories: none
SONY ND-138G equivalent Replacement needle for VL-38G It has been opened, but since there is no target cartridge, operation has not been checked (Kobayashi Hitoshi)
Maintenance information: operation unconfirmed
Accessories: original box
Sony ND-137G equivalent. Replacement needle for VL-38G. It is unopened and operation has not been checked (Hiura Katsutsugu)
Maintenance information: operation unconfirmed
Accessories: original box
Sony ND-131G equivalent VM-1200G replacement needle It is unopened and operation has not been checked (Hiura Katsutsugu)
Maintenance information: operation unconfirmed
Accessories: original box
Replacement needle for Hitachi DS-ST35 It is unopened and operation has not been checked (Hiura Katsutsugu)
Maintenance information: operation unconfirmed
Accessories: original box
Replacement needle for Hitachi DS-ST35 It is unopened and operation has not been checked (Hiura Katsutsugu)
Maintenance information: operation unconfirmed
Accessories: original box
Equivalent to Hitachi DS-ST23 Replacement needle for MT-23 It is unopened and operation has not been checked (Hiura Katsutsugu)
Maintenance information: operation unconfirmed
Accessories: original box
Equivalent to Hitachi DS-ST23 Replacement needle for MT-23 It is unopened and operation has not been checked (Hiura Katsutsugu)
Maintenance information: operation unconfirmed
Accessories: original box
Replacement Cartridge for Multi Record Player TCE-262P Pack of 3 Operation not confirmed. If you have been looking for one, please take this opportunity (Kanai Hidetsugu)
Maintenance information: There is no compatible device and operation has not been confirmed
Accessories: needle cover, instruction manual
A preamp for the company's high-end audio Reference series. In addition to adopting a fully balanced amplification system with positive and negative symmetry from input to output in the transmission circuit, accurate transmission of audio signals is achieved by arranging the same boards on the left and right audio circuits to form the same circuit on the left and right. There are no visible scratches on the exterior, etc., and it is good with just dullness. Serial NKPK000049JP (Takasaki Atsushi)
Maintenance information: 2024.6.1 operation confirmed
Accessories: remote control, copy of instruction manual, power cable, connection cable, original box
Main specifications: input terminal balance ☓ 3 unbalance ☓ 3 output terminal balance ☓ 2 unbalance ☓ 2 body dimensions W450mm ☓ H150mmD440mm 29kg power supply dimensions W220 ☓ H185 ☓ D430 mm 15 kg
Power supply/heater transformer primary: 100V secondary: 6.3V/4A, 7-6.3-5-5-6.3-7V/5A × 2 W130 × H150 × D130 mm 8.1 kg (actual measurement, not including protrusions) There are scratches in places (Yosuke Kojima)
Accessories: none
Power transformer primary: 100V secondary: 7.5-6.3-0-6.3-7.5V/3A (2 circuits) W90 × H121 × D90 mm approx. 3.6 kg (actual measurement, not including protrusions) There is a fine bruise (Kojima (Yosuke)
Accessories: none
*The woofer edge is deformed, the center cap is dented, there is an ATT crack, and there are footprints on the top plate, etc., so it is inexpensive and is sold as is. A floor-type speaker with a porous metal cone that realizes all-metal in the entire band. From the unit to the enclosure, this is a masterpiece that incorporates technology and cost as if Otto's intention were shown. The rich, natural sound is attractive. The enclosure also has scratches, chipped corners, etc. (Oikawa Tetsuji)
Maintenance information: 2024.5.29 Operation confirmed
Accessories: none
Main specifications: 3 way 3 speakers 8Ω 93dB W450 × H910 × D430 mm 51 kg
※6 month warranty. It is a speaker that was made for natural sound and gained popularity. There is no sense of emphasis and there is a good balance of strength between the high and low frequencies, which have a high texture, and it makes me feel the high level of musicality. There are scratches on the exterior. Serial 16400837L, 16400837R (Fujisawa Yukishi)
Maintenance information: 2024.5.31 operation confirmed
Accessories: jumper cable
Main specifications: 2-way, 2-speaker sealed, magnetic-proof type, W270 x H456 x D290 mm, 12.5 kg
This is a PA speaker for EVs. You can enjoy a clean sound with crisp high frequencies and responsive low frequencies. It's made of resin and is lightweight, so it's easy to carry around. It can be used for a wide range of purposes, such as reeds at home and at events. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Maintenance information: 2024.6.2 sound output confirmed
Accessories: none
Main specifications: 1 inch driver, 30 cm woofer impedance, 8 ohms, 300 W, 80 to 25,000 Hz, size W430 x H585 x D314 mm (actual measurement), 15.3 kg (actual measurement)
The price has been reduced. 2024/5/26 sales price 228,000 yen 2023/10 manufacturer maintenance completed! The flagship stereo power amplifier model with a KT120 push-pull configuration by Sun Valley. An output transformer with a bifiler-wound custom-made by Hashimoto Electric is used. It achieves both a wide range of sound that is pleasant to listen to. This is a powerful power amplifier that can make even vintage speakers sound with modern speakers. The exterior is dull (Hiura Katsuji)
Maintenance information: 2023.10.20 manufacturer maintenance (PT replacement with a brand new product, carrying out energization after returning the remodeled point to a normal state, measurement of voltage of each part and measurement of various characteristics, music playback test)
Accessories: power cable
Main specifications: used vacuum tube KT120 push-pull 55W+55W KT120 x 4 (TUNG-SOL), 12BH7A x 4 (ELECTRO HARMONICS), CV4003 x 2 W400 x H380 x D220 mm 32 kg
Super sapphire needle for Rectany Ronette type LP Unopened, operation unconfirmed (Murakoshi Yoichi)
Maintenance Information: Unopened
Accessories: original box