Maintained! A late model in the classic 607 series. It has high-resolution, well-defined sound, and is compatible with modern speakers. You can experience SANSUI's ability. There are threads and small scratches (Daiki Goto)
Maintenance information: 2024.6.2 maintained (maintenance contents/TONE and other subsonic, loudness, processor, muting, source direct, power amplifier direct, input selector, tape switch disassembly, polishing grease application, output relay replacement, protector capacitor replacement, each volume, switch cleaning, pin jack polishing, internal inspection and cleaning, running test.)
Accessories: copy of the manual
Main specifications: 105W+105W (6Ω) 90W+90W (8Ω) phono MM/ MC switching W430 x H162 x D452 mm 18 kg
Active speakers in the “Formation Suite” series of wireless audio compatible with high-resolution transmission. One unit is powered by a 125W digital amplifier. It features a high-quality sound that casually expresses a sense of dynamism when the sound starts up. It is a system that is likely to become a new listening style in the future, as it can also support network playback using Roon without using a separate amplifier (Kojima Yosuke)
Main specifications: 2-way active speaker output 125W x 2 Wi-Fi, AirPlay 2, Spotify Connect, Roon Ready compatible Bluetooth version: 4.1 Bluetooth compatible codecs: SBC, AAC, aptX HD W197 x H395 x D305 mm 10.6 kg/unit
Hi-Fi is in stock for the first time! It was brand new, unopened, but I opened it for testing. These wireless headphones were produced for a limited time to commemorate the 60th anniversary of the movie 007. Homages to James Bond are included everywhere, and it is a must-see model for fans that combines the symbols of B&W and 007 (Mizusaki Ryo)
Maintenance information: 2024.6.2 sound output confirmed
Accessories: original box, instruction manual
Main specifications: 40mm dynamic full range/driver x 2, battery life 30 hours, charging method, USB-C terminal, W189 x H233 x D63 mm, weight: 320 g
Comes with original box First arrival at Hi-Fi Hall. Headphones with a focus on sound and design. You can enjoy it regardless of genre with clear lines of sound. It is characterized by being comfortable to wear without the impression that it is being compressed. It is in good condition (Sasaki Shota)
Maintenance information: 2024.6.2 operation confirmed
Accessories: manual, original box, connection cable
Main specifications: diamic sealed 40mm driver frequency characteristics 20 to 22 kHz impedance 30 ohms cord length 1.2 m 230 g
Beautiful item with original box! An introductory model of an MC cartridge equipped with an oval needle bonded to an aluminum cantilever. It features delicate, clear, and highly transparent expressions. (FUJISAWA KOSHI)
Maintenance information: 2024.6.2 operation confirmed
Accessories: instruction manual, original box, needle cover
Main specifications: Playback frequency range 20 to 30,000 Hz output voltage 0.32 mV needle pressure 1.8 to 2.2 g (2.0 g standard) coil impedance 12 ohms recommended load resistance 100 ohms or more (when connected to a head amplifier) stylus joint oval needle aluminum pipe cantilever mass 7.6 g
Comes with original box! JICO's original headshell. A stylish design reminiscent of an SME. Recommended for light needle pressure tone arms. (FUJISAWA KOSHI)
Maintenance information: 2024.6.2 continuity confirmed
Accessories: instruction manual, original box
Main specifications: aluminum stamping dead weight 7.3 g
Beautiful item with original box! The MK2 CLUB from the Concorde series with an integrated headshell, is a staple of DJ play, and is now in stock for the first time at Hi-Fi. It is clear and stands out for its wide range. (FUJISAWA KOSHI)
Maintenance information: 2024.6.2 operation confirmed
Accessories: instruction manual, original box, needle cover
Main Specifications: Output voltage: 8mV Channel separation: 25dB (@1kHz) Frequency band (at -3dB): 20-20,000 Hz Stylus: Special Elliptical Appropriate Needle Pressure: 3g Dead Weight: 18.5g
Maintained! A premain amplifier boasting high driving power, supported by a strong power supply unit typical of Sansui. The sound is soft and transparent, yet also has firm, thick bass. The sophisticated design is also attractive. There is rust on the exterior and back of the top plate, and a feeling of use such as dullness and abrasions can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.6.2 maintained (output relay, headphone relay replacement, recouped wire switch due to damage, input selector, etc., switch disassembly polishing grease application (tone, loudness, subsonic, processor, power amplifier direct, source direct, tape, reckout switch), solder repair, each volume, switch cleaning, interior and exterior inspection cleaning, adjustment inspection)
Accessories: none
Main specifications: 130W+130W (8Ω) rated power consumption 330W W471 x H162 x D452 mm weight 23.5 kg
High output MC cartridge for mono LPs only. Plays deep sound that was not produced with stereo cartridges. It has the vividness unique to Technica, but the three-dimensional effect and intensity are an appeal unique to mono (Murakoshi Yoichi)
Maintenance information: 2024.6.2 sound output confirmed
Accessories: needle cover, original box
Main specifications: high output MC type output 1.2 mV needle pressure 2.0 g impedance 40 ohms dead weight 6.8 g
Orthophone 95th anniversary special limited set with shell An aluminum headshell SH-4 special limited-edition color red type is attached to the popular 2M Red MM cartridge. This is a high cost performance entry model MM cartridge that is clear, has good sound separation, and fits well with modern sources. *Since there is a crack on the needle cover side, it cannot be fixed to the main body. (MURAKOSHI Yoichi)
Maintenance information: 2024.6.2 sound output confirmed
Accessories: instruction manual, original box, needle cover (broken claws), brush, screws, shell
Main specifications: [2M RED] MM type 5.5 mV 20 to 22,000 Hz 47 ohms suitable needle pressure 1.8 g dead weight 7.2 g [SH4R] gold plated terminal body material aluminum self weight 9.3 g (excluding mounting screws)
Maintained! The thickness of the mid range and the thickness of the low range are an exciting masterpiece pre-main. The special phono part uses a transformer for built-in MC boosting. Compared to lower models, it combines the politeness of being able to enjoy classical music. Appearance, dullness, abrasions, and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.6.2 maintained (tone switch and other switches dismantled and polished, coated with grease (subsonic, loudness, muting, input selector, reckout), output relay, headphone relay replacement, main amplifier transistor, adjustment volume replacement, solder and board repair, balance volume replacement, each volume, switch cleaning, interior and exterior inspection cleaning, adjustment, operation confirmation)
Accessories: copy of instruction manual
Main specifications: 130W+130W (8Ω) PHONO (MM/MC) 2 systems W460 x H160 x D444 mm 18 kg
It is a grace shell characterized by a fin shape. Lightweight yet hard, highly rigid shell (Asaine Tomoho)
Maintenance information: 2024.6.2 continuity confirmed
Accessories: No accessories
Main specifications: carbon fiber dead weight 10.7g
Hi-Fi is in stock for the first time! GLANTZ statically balanced tone arm. The main body is machined from hard stainless steel, and the structure is firmly supported by 4 large bearings, and it has high traceability performance with reduced resonance and blurring, and exudes a sharp sound. Since there is weight in the weight part, you can use heavy cartridges such as OrtoFon's SPU without lowering the weight too much. The exterior is generally good (Takahashi Nobuyuki)
Maintenance information: 2024.6.2 operation confirmed
Accessories: instruction manual, headshell, phono cable, cartridge installation screw wrench
Main specifications: Form Static balance system Total length 330 mm Effective length (arm fulcrum to needle tip) 305 mm Effective length (arm fulcrum to center of turntable) 290 mm Compatible cartridge 16 to 43 g weight 1.14 kg Overhang 15 mm Mounting base internal dimensions 16 mm Mounting hole 30 mm
Machined aluminum headshell made by ENTRE. It has a standard shape, and the sound stretches and tightens well (Tomoho Asae)
Maintenance information: 2024.6.1 continuity confirmed
Accessories: none
Main specifications: dead weight approx. 13g
An improved model with a high output of the MC20 up to 0.5 mV. It is an aggressive sound with a sense of dynamism and sharp sharpness. The response is good and the sharpness is perfect, so it's perfect not only for jazz, but also for rock, etc. (ASAINE Tomonori)
Maintenance information: 2024.6.1 sound output confirmed
Accessories: none
Main specifications: MC type oval needle output voltage 0.5 mV frequency band 20 Hz to 30 kHz impedance 5 ohms needle pressure 1.8 to 2.2 g dead weight 10.7 g
Maintained! The flagship model of the Macintosh power amplifier with a silver panel. It is characterized by its strong, dense sound. The extrusion is strong and goes great with JBL large monitor speakers. The dynamism in the mid to low range, which is difficult to obtain with current Mackin power amplifiers, is attractive. There are scratches and stains on the exterior, and rust can be seen on the top plate and back panel (Mizusaki Ryo)
Maintenance information: 2024.6.1 maintained (transistor in driver board, LDR, capacitor deterioration, GAIN, VOL noise, meter board capacitor deterioration, power supply board capacitor deterioration, meter lamp, display lamp deterioration → replacement. Meter dismantling terminal lead wire soldering treatment, MODE SW dismantling cleaning, operation check, power stage check OK)
Accessories: power cord, copy of instruction manual
Main specifications: 500W+500W (1000W when mono) equipped with power guard circuit W483 x D465 x H263 mm 60.3 kg
Digital breakout cable sold separately is included. High end AD/DA converter compatible with maximum sample rate PCM768 kHz and DSD 11.2 MHz. In addition to being an excellent USB-DAC, this extremely powerful high-output headphone amplifier that is compatible with balanced driving demonstrates more power than its size. It is also equipped with a high-resolution display, so you can enjoy music both audibly and visually. There is a slight thread on the exterior (Mizusaki Ryo)
Maintenance information: 2024.6.1 operation confirmed
Accessories: manual, original box, power adapter, conversion connector (digital breakout cable)
Main specifications: audio interface, maximum sampling frequency PCM768kHz, DSD 11.2 MHz, output impedance: 200 Ω balanced, 100 Ω unbalanced
※There is no problem with the sound output operation, but the LCD is dark and there are places where the characters disappear, so it is inexpensive. The company's first standalone USB-DAC and headphone amplifier compatible with DSD. This product took out the USB-DAC part of the company's CD player DCD-1500RE and finished as a standalone unit. Not only does it play music, but it also effectively upgrades the sound of movies and games on a PC. The exterior has noticeable scratches on the top plate, paint chips, etc. (Mizusaki Ryo)
Maintenance information: 2024.6.1 operation confirmed
Accessories: power cord
Main specifications: DSD signal sampling frequency 2.8224, 5.6448MHz sampling frequency PCM signal 32, 44.1, 48, 64, 88.2, 96, 176.4, 192 kHz input terminal USB (TypeB) x 1, optical digital input x 2, coaxial digital input x 1 output terminal analog audio output (L/R) x 1, headphone output x 1 (6.3 mm stereo standard jack) dimensions W170 x H57 x D182 mm weight 1.5 kg
*Lead wire missing. Popular wood headshell Asada cherry blossoms from Hokkaido are used as the material, and it is a hard, good-sounding material that is also used for speakers and headphone cases (Tamura Eiji)
Maintenance information: 2024.6.1 operation confirmed
Accessories: No accessories
Main specifications: Hokkaido Asada cherry heartwood self-weight 10.4 g
The price has been reduced! 2024/6/1 sales price 148,000 yen A center speaker that develops ELAC's new-generation quality into multi-channel. It can easily handle the latest multi-channel sources that require huge amounts of information from the center channel. The exterior has line scratches on the TW periphery and threads on the top plate. Serial 0614 (Yonejima Satoshi)
Maintenance information: 2024.6.1 sweep check is good
Accessories: saran net
Main specifications: center speaker, 2.5-way bass reflex, efficiency 89dB, impedance, 4Ω, frequency characteristics, 32 to 50,000 Hz, crossover frequency, 450/2,400 Hz, maximum input 160 W, W650 x H204 x D314 mm, weight 14 kg
Maintenance has been completed, such as creating a new dust cover and replacing capacitors! Micro belt drive middle class player. Coupled with a 3.2 kg heavyweight platter, the tone is extremely quiet and smooth. The cabinet is also highly rigid, leading to thick, stable analog sound. There are dullness and small scratches on the exterior. Serial 49120206 (Yonejima Satoshi)
Maintenance information: 2024.6.1 Maintained (new dust cover created. Motor bearing oil replacement, replacement of deteriorated parts (electrolytic capacitors, semi-fixed resistors, rectifier diodes). Tone arm disassembly/bearing replacement. Lifter disassembly/grease up Speed switching SW, fine rotation adjustment, volume disassembly/contact polishing. Check turntable rotation speed, check arm operation, and needle pressure. Exterior cleaning, sound test, and other operation checks)
Accessories: No accessories
Main specifications: belt drive type static balance type tone arm needle pressure variable range 0 g to 3 g compatible cartridge dead weight 11.5 g to 21 g (including shell) W510 x H155 x D400 mm 13 kg
Machined aluminum headshell made by ENTRE. It has a standard shape, and the sound stretches and tightens well (Tomoho Asae)
Maintenance information: 2024.6.1 continuity confirmed
Accessories: none
Main specifications: dead weight approx. 13g
A headphone amplifier with a built-in DAC equipped with a renewed D/A circuit and 1 ESS Technology “ES9038Q2M” on the left and right. By using the DAC in mono mode, a high S/N value is obtained, and native playback of DSD 22.5 MHz and PCM 768 kHz/32 bit is realized. The exterior is good with no noticeable scratches. Serial 20Z0002 (Tomonori Asaine)
Maintenance information: 2024.5.26 Operation confirmed
Accessories: Remote control power cord (general purpose)
Main specifications: USB input 16 to 32 bit, 44.1 kHz to 768 kHz, DSD2.8 m to 22.5 MHz coaxial, optical digital input 16/24 bit, 32k to 192 kHz, DSD2.8 MHz (compatible with 176.4 kHz/24 bit DOP transmission) Inputs: USB B2.0, RCA, coaxial, optical x 2, coaxial 3.5mm mini, Bluetooth output: RCA, XLR, 6.3 mm standard x 2, 4.4 mm 5 poles Pentaconn W290×H84.5×D248.7mm 4.1 kg
Hyphonic rare shell Made of hard aluminum alloy+gold plated brass, it has a luxurious appearance. The overhang can be adjusted using the slide method. The exterior is dull (Tomonori Asaine)
Maintenance information: 2024.6.1 continuity confirmed
Accessories: No accessories
Main specifications: Weight 13g (including lead wire)
It hasn't been in stock in a long time! Accuphase Premium Cartridges Using a sapphire tube cantilever, the sound is straightforward with no specific sound, almost no distortion, and a perfect sense of range. Now it's a manufacturer that pushes ahead with the cutting edge of digital audio, but it's a cartridge where you can once again feel the high level of analog audio technology (Yamato Yuki)
Maintenance information: 2024.5.31 operation confirmed
Accessories: The original box needle cover is missing
Main specifications: MC type output voltage 0.18 mV needle pressure 1.5 to 2.5 g optimal 2 g impedance 4 ohms line contact needle
Designed with a complete dual mono configuration from the power transformer. The pre and power are also independently configured. The high range is sparkling, and the mid and low frequencies are thick, making it a profound sound. The exterior has dullness, threads, and scratches on the front (Ryo Mizusaki)
Maintenance information: 2024.5.31 Maintained (The battery was replaced and the board pattern was corrected due to liquid leakage in the function memory battery. (Since the VR shaft is long, accuracy cannot be achieved, and stress is applied to the VR, so the extension shaft flexible joint Assy was replaced)
Accessories: remote control, instruction manual, power cord
Main specifications: effective output 85W+85W (8Ω) 170W+170W (4Ω) input: unbalanced (RCA) x 6 systems (1 system is PHONO: MM/MC compatible, 1 is TAPE) outer dimensions W440 mm x H95 mm x D400 mm weight 13 kg
The price has been reduced! 2024/5/31 sales price 598,000 yen Manufacturer maintained! A famous machine loaded with excellent phono amplifiers. This is a good quality control amplifier that allows you to hear clean, transparent sound. There are only top quality models, and the thickness and luster of the sound will not fade even after nearly 30 years have passed. The exterior has dullness and small scratches, and there are noticeable abrasions on the left side. Serial A2X643 (Takahashi Nobuyuki)
Maintenance information: 2024.5.31 Maintained (capacitor replacement logo, lamp replacement, each switch, input/output terminal contact cleaning, DC offset voltage readjustment of each amplifier, internal and external cleaning functions, performance check, pressure resistance, safety check)
Accessories: none
Main specifications: input terminal/RCA5 system, XLR2 system, tape input/output terminal 2 system, PHONO input 2 system pre-out/RCA2 system, XLR2 system W468 x H171 x D415 mm 25.1 kg
Refreshment maintenance was carried out with attention to detail, such as all exterior painting and driver gap cleaning! You can experience a unique sound that makes you feel a hot breath in the dry sound. This time it's a combination of enclosure 828B, woofer 416-8B, driver 802-8D+511B, and network N501-8A. The outstanding vocal band and the sense of energy of the resonating horn are amazing. The exterior has been beautifully finished due to exterior repairs (Murakoshi Yoichi)
Maintenance information: 2024.5.29 maintenance (exterior repair/full painting, saran net replacement, horn painting and butyl tape removal work, new horn receiver creation. Woofer maintenance (viscoid adjustment, terminal/vis-cleaning) driver maintenance (magnetic circuit gap cleaning/center adjustment, diaphragm screw replacement/lead disconnection repair) network maintenance (frequency characteristic check, ATT cleaning, terminal/vis-cleaning, butyl tape removal work) unit detachment, new horn stay installation processing, new wiring)
Accessories: none
Main specifications: 2 way 2 speaker unit configuration 802-8D+511b・416-8b・N501-8A・828b Dimensions W760 × H1,375 × D610 mm Weight approx. 74.0 kg
Maintained! A preamp with plenty of phono that analog users are happy with. There are 3 PHONO inputs, 5 MM cartridge loads, and a dedicated transistor is used for the MC head amplifier, so you can enjoy clear, sharp sound with a clear outline (Yoichi Murakoshi)
Maintenance information: 2024.5.29 maintenance (switch disassembly, contact polishing, contact cleaner application. Volume contact correction. Replace deteriorated parts in each circuit. PHONO circuit IC replacement display lamp replacement. (I/O pin jack polish)
Accessories: none
Main specifications: input terminal/3 phono systems (MM/MM/MC), TAPE2 system, AUX, TUNER power consumption 40W external dimensions W435 x H116 x D376 mm weight 8.5 kg
A rare tone arm from RS Labs that was introduced and sold in a radio technical magazine in 1996. As with linear tracking, the tracking error is zero. The head shell part rotates freely, and the structure automatically adjusts so that tracking errors are always zero. The straight arm lowered from a high position to eliminate downforce is impressive. It is a legendary device that goes beyond the overview of traditional tone arms and reproduces analog (Murakoshi Yoichi)
Maintenance information: 2024.5.31 continuity confirmed
Accessories: original box, main weight, sub weight, hex wrench, instruction manual (English copy)
Main specifications: One-point support arm effective length 215mm
Dayton Audio's small power amplifier. Designed to be just the right size for a desktop, this is one that can be loud enough for a small speaker. It also has a headphone jack, so it can also be used as a headphone amplifier. The exterior is dull. Serial V200004300 (Tamura Eiji)
Maintenance information: 2024.5.30 Operation confirmed
Accessories: AC adapter
Main specifications: 60W+60W (4Ω) W117 x H44 x D79 mm dead weight 1.23 kg
Maintained. DYNACO's tubular mono power amplifiers are highly popular. The sleek, straight, and energetic sound that comes out of the small body is attractive. Combinations with Altech and JBL are a staple, and they make jazz and rock sounds powerful and full of realism. You can see a feeling of use on the exterior, dullness, rust, scratches, etc. (Murakoshi Yoichi)
Maintenance information: 2024.5.29 maintenance (board peeling and re-soldering treatment, block capacitor 30/20/20 μF replacement, film capacitor 0.047 μF → 0.1 μF original, electrolytic capacitor 50 μF, resistance 1W → 1/2 W original replacement, BIAS readjustment/RCA jack and vacuum tube socket caulking repair. Operation check) 2016.2.27 Maintained (AC cord, cord stopper, input terminal, capacitor (47uF100V) resistor (47k, 270k, 470k, 1M) 1/2 w, replacement of 2 vacuum tubes (6550), bias adjustment)
Accessories: copy of instruction manual
Main specifications: tubular mono power amplifier using vacuum tube KT88/5AR4/6AN8A output 60W/140W W229 × H190 × D229 mm 11.5 kg
Equipped with an original needle. A rare TYPE2 from the popular V15 series. Although it is MM, the resolution is high, and the power of the low frequencies and the ease of transmission are attractive. The exterior is dull and scratched. There is no such thing as needle bends (Murakoshi Yoichi)
Maintenance information: 2024.5.26 sound output confirmed
Accessories: none
Main specifications: mm type output 3.5 mV needle pressure 0.75 to 1.5 g dead weight 7 g
Maintained! SPU round needle type with built-in transformer. This is a shell from the Knicks era. The rich, rich SPU-like sound is attractive. The built-in transformer gives the impression that transparency and clarity have been improved. Needle cover missing. The exterior has a feeling of use such as dullness. Serial 340898 (Murakoshi Yoichi)
Maintenance information: 2024.5.29 Maintained (cantilever, damper adjustment, rubber cover replacement, cleaning)
Accessories: none
Main specifications: MC type with built-in transformer output 10 mV needle pressure 3 to 4.5 g dead weight 32 g
Technics MM Cartridges It was adopted as an accessory to the company's record player. It has a neutral, deafening sound, and is compatible with various music genres (Murakoshi Yoichi)
Maintenance information: 2024.5.26 sound output confirmed
Accessories: none
Main specifications: mm type output voltage 3.2 mV frequency range 20 to 25 kHz needle pressure 1.75 g dead weight 6 g
The price has been reduced! 2024/5/29 Denon luxury analog player with sales price 89,800 yen. The shades and coatings of the cabinets are also impressive. The drive motor is powerful, and the stopping action is instantaneous in a blink of an eye until it rotates at a fixed speed. The sense of stability in operation is excellent, and record playback with high freshness is attractive. The exterior is scratched on the dust cover, small scratches, and dullness on the cabinet. Serial 3086300399 (Yonejima Satoshi)
Maintenance information: 2024.5.29 Operation confirmed
Accessories: power cable, connection cord
Main specifications: quartz lock type direct drive 33/45 rotation static balance S-shaped pipe arm height adjustment range approx. 6 mm needle pressure adjustment range 0 to 4.0 g (1 scale 0.25 g) compatible cartridge weight 14.0 to 20.0 g (headshell included) W490 x H178 x D400 mm 13.6 kg
Comes with a power unit (GKP04). NF type phono equalizer with built-in MC head amplifier. The sound quality is slightly softer with lower distortion than the CR type. You can enjoy analog playback of an introductory pre-main amplifier more deeply. *The manufacturer recommends an output of 0.3 mV or more for MC, and the mm gain is 45 dB. Serial No. 718 (Tamura Eiji)
Maintenance information: 2024.5.29 Operation confirmed
Accessories: none
Main specifications: mm/MC switching input resistance mm/47 kΩ, MC/approx. 200 ohm W120 x H25 x D120 mm power supply unit W120 x H25 x D120 mm
High output MC cartridge for mono LPs only. Plays deep sound that was not produced with stereo cartridges. It has the vividness unique to Technica, but the three-dimensional effect and intensity are unique to mono (Tamura Eiji)
Maintenance information: 2024.5.29 Operation confirmed
Accessories: needle cover
Main specifications: high output MC type output 1.2 mV needle pressure 2.0 g impedance 40 ohms dead weight 6.8 g
The price has been reduced. 2024/5/29 sales price 108,000 yen This is an MC-only phono equalizer that was sold to commemorate the 25th anniversary of the birth of the LP12. It is designed so that the sound of the LP12 can be enjoyed at its best by simplifying the signal path and installing a low noise power supply. The center of gravity is low and the sound quality is high in texture, but surprisingly, it is compatible with the SPU and can be used for a wide range of purposes. There is an appearance, dullness, threads, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.29 Operation confirmed
Accessories: power cable
Main specifications: Phono equalizer for MC cartridges, input level 150 μ/480 μV, input cae impedance 1500/4.7 nF, W320 x H80 x D326 mm, 1.5 kg
A popular SME classic headshell with a stylish design. It's lightweight, which is essential for light needle pressure arms and heavy cartridges, and after all, this is the best fit for SME arms. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.26 continuity confirmed
Accessories: none
Main specifications: aluminum stamping dead weight 8g
A classic GRACE shell. The aluminum press processing makes it a strong, highly rigid body yet lightweight. Large finger mount You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.26 continuity confirmed
Accessories: none
Main specifications: aluminum stamping dead weight 6.8 g
Manufacturer's maintenance completed! Denon's highest-model phono motor at the time. They are orthodox and have a high sense of stability, such as a turntable with a double structure and DENON's traditional AC servo motors. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.28 manufacturer maintenance (head gap adjustment, micro SW replacement, power circuit capacitor, strobe lighting circuit capacitor replacement, etc., inspection operation test of each part)
Accessories: none
Main specifications: quartz lock direct drive, outer rotor, 3-phase AC servo motor, double structure, die-cast aluminum turntable, compatible with 33 and 45 rotations, approx. 10 kg
Maintained! A famous instrument and the first generation preamp. The coat is different from modern tones, and the solid sharpness and punchy tone go great with vintage speakers such as JBL. The crunchy sound image and exhilarating sounds are a habit. The exterior is dull and has a feeling of use. Serial E6T080 (Hiroki Aso)
Maintenance information: 2024.5.27 Maintained (contact push switch due to poor contact with the rotary switch due to poor contact, all switches dismantling contacts polishing contacts grease coating TONE switch disassembly contacts cleaning contacts grease coating electrolytic capacitor replacement lamp replacement each input/output operation check)
Accessories: instruction manual copy power cable (general-purpose product)
Main specifications: 3 phono systems (with head amplifier), line 3 systems, tape, 3 systems, dimensions W445 x H160 x D373 mm, weight 13.4 kg
YBA's rare power amplifier is in stock for the first time at Hi-Fi! Uses a large double power transformer and an original Motorola power transistor. Engineers who were in charge of design at Goldmund are in charge of production, and the sound field is large. It is an amplifier with a very high degree of perfection, with precise tone, medium and low frequencies with intonation, etc. The exterior has dullness, threads, etc. (YONEJIMA Satoshi)
Maintenance information: 2024.5.28 Operation confirmed
Accessories: power cord
Main specifications: 85W+85W (8Ω) 170W+170W (4Ω) W430 × D330 × H132 mm,22 kg
This is a small SUPEX level gauge that is easy to use. Having one is convenient for leveling a record player (Kobayashi Hitoshi)
Accessories: none
Main specifications: actual size: diameter: 22 x height: 20 mm, dead weight: 10 g
This is Belldream Cartridge Keeper BD-CK2A. It comes with a headshell and can hold 2 cartridges. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: W90 ✕ H120 ✕ D90mm 160g
Audio-Technica connectable cartridge capsule. One can be stored while the headshell is attached. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: W51 x H85 x D51 mm 36.3 g (actual measurement)
Audio-Technica connectable cartridge capsule. One can be stored while the headshell is attached. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: W51 x H85 x D51 mm 36.3 g (actual measurement)